Require `NetworkBehaviourAction::{DialPeer,DialAddress}` to contain a
`ProtocolsHandler`. This allows a behaviour to attach custom state to its
handler. The behaviour would no longer need to track this state separately
during connection establishment, thus reducing state required in a behaviour.
E.g. in the case of `libp2p-kad` the behaviour can include a `GetRecord` request
in its handler, or e.g. in the case of `libp2p-request-response` the behaviour
can include the first request in the handler.
Return `ProtocolsHandler` on connection error and close. This allows a behaviour
to extract its custom state previously included in the handler on connection
failure and connection closing. E.g. in the case of `libp2p-kad` the behaviour
could extract the attached `GetRecord` from the handler of the failed connection
and then start another connection attempt with a new handler with the same
`GetRecord` or bubble up an error to the user.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Don't close connection if ping protocol is unsupported by remote. Previously, a
failed protocol negotation for ping caused a force close of the connection. As a
result, all nodes in a network had to support ping. To allow networks where some
nodes don't support ping, we now emit `PingFailure::Unsupported` once for every
connection on which ping is not supported.
Co-authored-by: Max Inden <mail@max-inden.de>
Not all implementations of `NetworkBehaviour` need all callbacks.
We've have been adding new callbacks with default implementations
for a while now. There is no reason the initial ones cannot also
be defaulted, thus making it easier create new implementations.
Co-authored-by: Max Inden <mail@max-inden.de>
* Refactor the ping protocol.
Such that pings are sent over a single substream, as it is
done in other libp2p implementations. Note that, since each
peer sends its pings over a single, dedicated substream,
every peer that participates in the protocol has effectively
two open substreams.
* Cleanup
* Update ping changelog.
* Update protocols/ping/src/protocol.rs
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Max Inden <mail@max-inden.de>
although 32 is prefect fine in our case, it would be consistent to use the const value PING_SIZE.
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* [libp2p-swarm] Make the multiple connections per peer first-class.
This commit makes the notion of multiple connections per peer
first-class in the API of libp2p-swarm, introducing the new
callbacks `inject_connection_established` and
`inject_connection_closed`. The `endpoint` parameter from
`inject_connected` and `inject_disconnected` is removed,
since the first connection to open may not be the last
connection to close, i.e. it cannot be guaranteed,
as was previously the case, that the endpoints passed
to these callbacks match up.
* Have identify track all addresses.
So that identify requests can be answered with the correct
observed address of the connection on which the request
arrives.
* Cleanup
* Cleanup
* Improve the `Peer` state API.
* Remove connection ID from `SwarmEvent::Dialing`.
* Mark `DialPeerCondition` non-exhaustive.
* Re-encapsulate `NetworkConfig`.
To retain the possibility of not re-exposing all
network configuration choices, thereby providing
a more convenient API on the \`SwarmBuilder\`.
* Rework Swarm::dial API.
* Update CHANGELOG.
* Doc formatting tweaks.
* Allow multiple connections per peer in libp2p-core.
Instead of trying to enforce a single connection per peer,
which involves quite a bit of additional complexity e.g.
to prioritise simultaneously opened connections and can
have other undesirable consequences [1], we now
make multiple connections per peer a feature.
The gist of these changes is as follows:
The concept of a "node" with an implicit 1-1 correspondence
to a connection has been replaced with the "first-class"
concept of a "connection". The code from `src/nodes` has moved
(with varying degrees of modification) to `src/connection`.
A `HandledNode` has become a `Connection`, a `NodeHandler` a
`ConnectionHandler`, the `CollectionStream` was the basis for
the new `connection::Pool`, and so forth.
Conceptually, a `Network` contains a `connection::Pool` which
in turn internally employs the `connection::Manager` for
handling the background `connection::manager::Task`s, one
per connection, as before. These are all considered implementation
details. On the public API, `Peer`s are managed as before through
the `Network`, except now the API has changed with the shift of focus
to (potentially multiple) connections per peer. The `NetworkEvent`s have
accordingly also undergone changes.
The Swarm APIs remain largely unchanged, except for the fact that
`inject_replaced` is no longer called. It may now practically happen
that multiple `ProtocolsHandler`s are associated with a single
`NetworkBehaviour`, one per connection. If implementations of
`NetworkBehaviour` rely somehow on communicating with exactly
one `ProtocolsHandler`, this may cause issues, but it is unlikely.
[1]: https://github.com/paritytech/substrate/issues/4272
* Fix intra-rustdoc links.
* Update core/src/connection/pool.rs
Co-Authored-By: Max Inden <mail@max-inden.de>
* Address some review feedback and fix doc links.
* Allow responses to be sent on the same connection.
* Remove unnecessary remainders of inject_replaced.
* Update swarm/src/behaviour.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update swarm/src/lib.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update core/src/connection/manager.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update core/src/connection/manager.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update core/src/connection/pool.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Incorporate more review feedback.
* Move module declaration below imports.
* Update core/src/connection/manager.rs
Co-Authored-By: Toralf Wittner <tw@dtex.org>
* Update core/src/connection/manager.rs
Co-Authored-By: Toralf Wittner <tw@dtex.org>
* Simplify as per review.
* Fix rustoc link.
* Add try_notify_handler and simplify.
* Relocate DialingConnection and DialingAttempt.
For better visibility constraints.
* Small cleanup.
* Small cleanup. More robust EstablishedConnectionIter.
* Clarify semantics of `DialingPeer::connect`.
* Don't call inject_disconnected on InvalidPeerId.
To preserve the previous behavior and ensure calls to
`inject_disconnected` are always paired with calls to
`inject_connected`.
* Provide public ConnectionId constructor.
Mainly needed for testing purposes, e.g. in substrate.
* Move the established connection limit check to the right place.
* Clean up connection error handling.
Separate connection errors into those occuring during
connection setup or upon rejecting a newly established
connection (the `PendingConnectionError`) and those
errors occurring on previously established connections,
i.e. for which a `ConnectionEstablished` event has
been emitted by the connection pool earlier.
* Revert change in log level and clarify an invariant.
* Remove inject_replaced entirely.
* Allow notifying all connection handlers.
Thereby simplify by introducing a new enum `NotifyHandler`,
used with a single constructor `NetworkBehaviourAction::NotifyHandler`.
* Finishing touches.
Small API simplifications and code deduplication.
Some more useful debug logging.
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
Co-authored-by: Toralf Wittner <tw@dtex.org>
* Fix broken links in rustdoc
This fixes all of the rustdoc warnings on nightly.
* Check documentation intra-link
* Fix config
* Fix bad indent
* Make nightly explicit
* More links fixes
* Fix link broken after master merge
Co-authored-by: Demi Obenour <48690212+DemiMarie-parity@users.noreply.github.com>
* Simplify trait bounds requirements
* More work
* Moar
* Finish
* Fix final tests
* More simplification
* Use separate traits for Inbound/Outbound
* Update gossipsub and remove warnings
* Add documentation to swarm
* Remove BoxSubstream
* Fix tests not compiling
* Fix stack overflow
* Address concerns
* For some reason my IDE ignored libp2p-kad
- Pin `futures_codec` to version 0.3.3 as later versions require
at least bytes-0.5 which he have not upgraded to yet.
- Replace `futures::executor::block_on` with `async_std::task::block_on`
where `async-std` is already a dependency to work around an issue with
`park`/`unpark` behaviour.
- Use the published version of `quicksink`.
* Configurable multistream-select protocol. Add V1Lazy variant. (#1245)
Make the multistream-select protocol (version) configurable
on transport upgrades as well as for individual substreams.
Add a "lazy" variant of multistream-select 1.0 that delays
sending of negotiation protocol frames as much as possible
but is only safe to use under additional assumptions that
go beyond what is required by the multistream-select v1
specification.
* Improve the code readability of the chat example (#1253)
* Add bridged chats (#1252)
* Try fix CI (#1261)
* Print Rust version on CI
* Don't print where not appropriate
* Change caching strategy
* Remove win32 build
* Remove win32 from list
* Update libsecp256k1 dep to 0.3.0 (#1258)
* Update libsecp256k1 dep to 0.3.0
* Sign now cannot fail
* Upgrade url and percent-encoding deps to 2.1.0 (#1267)
* Upgrade percent-encoding dep to 2.1.0
* Upgrade url dep to 2.1.0
* Fix more conflicts
* Revert CIPHERS set to null (#1273)
This is now a very simple option serving multiple purposes:
* It allows for stable (integration) tests involving a Swarm, which
are otherwise subject to race conditions due to the connection being
allowed to terminate at any time with `KeepAlive::No`
(which remains the default).
* It makes for a more entertaining ping example which continuously
sends pings.
* Maybe someone wants to use the ping protocol for application-layer
connection keep-alive after all.
* Fix connection & handler shutdown when using `KeepAlive::Now`.
Delay::new(Instant::now()) is never immediately ready, resulting in
`KeepAlive::Now` to have no effect, since the delay is re-created on
every execution of `poll()` in the `NodeHandlerWrapper`. It can also
send the node handler into a busy-loop, since every newly
created Delay will trigger a task wakeup, which creates a new Delay
with Instant::now(), and so forth.
The use of `Delay::new(Instant::now())` for "immediate" connection shutdown
is therefore removed here entirely. An important assumption is thereby
that as long as the node handler non-empty `negotiating_in` and `negotiating_out`,
the handler is not dependent on such a Delay for task wakeup.
* Correction to the libp2p-ping connection timeout.
The current connection timeout is always short of one `interval`,
because the "countdown" begins with the last received or sent pong
(depending on the policy). In effect, the current default config has
a connection timeout of 5 seconds (20 - 15) from the point when a ping is sent.
Instead, the "countdown" of the connection timeout should always begin
with the next scheduled ping. That also makes all configurations valid,
avoiding pitfalls.
The important properties of the ping handler are now checked to hold for all
configurations, in particular:
* The next ping must be scheduled no earlier than the ping interval
and no later than the connection timeout.
* The "countdown" for the connection timeout starts on the next ping,
i.e. the full connection timeout remains at the instant when the
next ping is sent.
* Do not keep connections alive.
The ping protocol is not supposed to keep otherwise idle connections
alive, only to add an additional condition for terminating them in
the form of a configurable number of consecutive failed ping requests.
In this context, the `PingPolicy` does not seem useful any longer.
* libp2p-ping improvements.
* re #950: Removes use of the `OneShotHandler`, but still sending each
ping over a new substream, as seems to be intentional since #828.
* re #842: Adds an integration test that exercises the ping behaviour through
a Swarm, requiring the RTT to be below a threshold. This requires disabling
Nagle's algorithm as it can interact badly with delayed ACKs (and has been
observed to do so in the context of the new ping example and integration test).
* re #864: Control of the inbound and outbound (sub)stream protocol upgrade
timeouts has been moved from the `NodeHandlerWrapperBuilder` to the
`ProtocolsHandler`. That may also alleviate the need for a custom timeout
on an `OutboundSubstreamRequest` as a `ProtocolsHandler` is now free to
adjust these timeouts over time.
Other changes:
* A new ping example.
* Documentation improvements.
* More documentation improvements.
* Add PingPolicy and ensure no event is dropped.
* Remove inbound_timeout/outbound_timeout.
As per review comment, the inbound timeout is now configured
as part of the `listen_protocol` and the outbound timeout as
part of the `OutboundSubstreamRequest`.
* Simplify and generalise.
Generalise `ListenProtocol` to `SubstreamProtocol`, reusing it in
the context of `ProtocolsHandlerEvent::OutboundSubstreamRequest`.
* Doc comments for SubstreamProtocol.
* Adapt to changes in master.
* Relax upper bound for ping integration test rtt.
For "slow" CI build machines?
* Embed the topology in the NetworkBehaviour
* Put topologies inside of Floodsub and Kad
* Fix core tests
* Fix chat example
* More work
* Some cleanup
* Restore external addresses system
* Replace the &mut TTopology with a &mut PollParameters
* Add supported_protocols
* Add external_addresses
* Report out addresses in Kademlia
* Fix the custom derive
* Some comments
* Fix compilation on stable
