Instead of having a mix of `poll_event`, `poll_outbound` and `poll_close`, we
flatten the entire interface of `StreamMuxer` into 4 individual functions:
- `poll_inbound`
- `poll_outbound`
- `poll_address_change`
- `poll_close`
This design is closer to the design of other async traits like `AsyncRead` and
`AsyncWrite`. It also allows us to delete the `StreamMuxerEvent`.
Remove the concept of individual `Transport::Listener` streams from `Transport`.
Instead the `Transport` is polled directly via `Transport::poll`. The
`Transport` is now responsible for driving its listeners.
* core/muxing: Remove `Into<io::Error>` bound from `StreamMuxer::Error`
This allows us to preserve the type information of a muxer's concrete
error as long as possible. For `StreamMuxerBox`, we leverage `io::Error`'s
capability of wrapping any error that implements `Into<Box<dyn Error>>`.
* Use `?` in `Connection::poll`
* Use `?` in `muxing::boxed::Wrap`
* Use `futures::ready!` in `muxing::boxed::Wrap`
* Fill PR number into changelog
* Put `Error + Send + Sync` bounds directly on `StreamMuxer::Error`
* Move `Send + Sync` bounds to higher layers
* Use `map_inbound_stream` helper
* Update changelog to match new implementation
Log peer ID and stream limit as well as reference config option when limit is
exceeded. This should help folks running into this limit debug what is going on.
This limit is shared across all `ConnectionHandler`s on a single connection. It
only enforces a limit on the number of negotiating substreams. Once negotiated a
`ConnectionHandler` manages the lifecycle of the substream and has to enforce
limits themselves.
The `HandlerWrapper` polls three components:
1. `ConnectionHandler`
2. Outbound negotiating streams
3. Inbound negotiating streams
The `ConnectionHandler` itself might itself poll already negotiated streams.
By polling the three components above in the listed order one:
- Prioritizes local work and work coming from negotiated streams over
negotiating streams.
- Prioritizes outbound negotiating streams over inbound negotiating
streams, i.e. outbound requests over inbound requests.
Have the main event loop (`Swarm::poll_next_event`) prioritize:
1. Work on `NetworkBehaviour` over work on `Pool`, thus prioritizing
local work over work coming from a remote.
2. Work on `Pool` over work on `ListenersStream`, thus prioritizing work
on existing connections over upgrading new incoming connections.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Simplifies `PoolEvent`, no longer carrying a reference to an
`EstablishedConnection` or the `Pool`, but instead the `PeerId`,
`ConnectionId` and `ConnectedPoint` directly.
Co-authored-by: Elena Frank <elena.frank@protonmail.com>
Previously `libp2p-swarm` required a `Transport` to be `Clone`. Methods
on `Transport`, e.g. `Transport::dial` would take ownership, requiring
e.g. a `Clone::clone` before calling `Transport::dial`.
The requirement of `Transport` to be `Clone` is no longer needed in
`libp2p-swarm`. E.g. concurrent dialing can be done without a clone per
dial.
This commit removes the requirement of `Clone` for `Transport` in
`libp2p-swarm`. As a follow-up methods on `Transport` no longer take
ownership, but instead a mutable reference (`&mut self`).
On the one hand this simplifies `libp2p-swarm`, on the other it
simplifies implementations of `Transport`.
A `ProtocolsHandler`, now `ConnectionHandler`, handels a connection, not
a protocol. Thus the name `CONNECTIONHandler` is more appropriate.
Next to the rename of `ProtocolsHandler` this commit renames the `mod
protocols_handler` to `mod handler`. Finally all combinators (e.g.
`ProtocolsHandlerSelect`) are renamed appropriately.
Previously one would wrap a `ProtocolsHandler` into a
`NodeHandlerWrapper` as early as possible, even though the functionality
of `NodeHandlerWrapper` is only needed within `mod connection`.
This commit makes `NodeHandlerWrapper` an implementation detail of `mod
connection`, thus neither `mod protocols_handler`, `mod pool` nor the
root level (`libp2p-swarm`) need to bother about the abstraction.
In addition to the above, this commit:
- Renames `NodeHandlerWrapper` to `HandlerWrapper`. The word `Node` is
outdated.
- Removes `NodeHandlerWrapperBuilder`. With this simplification it is no
longer needed.
- Folds `NodeHandlerWrapperError` into `ConnectionError`. No need for
upper layers to be aware of the fact that `ProtocolHandler`s are
wrapped.
The `ConnectionHandler` trait is not exposed to users. The only
implementor of `ConnectionHandler` is `NodeHandlerWrapper`. Thus
`ConnectionHandler` is a superfluous abstraction. This commit removes
`ConnectionHandler`.
Next to this large change, this commit removes the `Tmuxer` trait
parameter. `Swarm` enforces dynamic dispatching via `StreamMuxerBox`
anyways, thus the trait parameter is useless.
As a follow up to this commit one could rename `ProtocolsHandler` to
`ConnectionHandler` and `NodeHandlerWrapper` to
`ConnectionHandlerWrapper` or just `Wrapper`.
Disconnect pending connections with `Swarm::disconnect` and eport aborted
connections via `SwarmEvent::OutgoingConnectionError`.
Co-authored-by: Jack Maloney <git@jmmaloney4.xyz>
Co-authored-by: Marco Munizaga <git@marcopolo.io>
This commit removes the `Network` abstraction, thus managing `Listeners`
and the connection `Pool` in `Swarm` directly. This is done under the
assumption that noone uses the `Network` abstraction directly, but
instead everyone always uses it through `Swarm`. Both `Listeners` and
`Pool` are moved from `libp2p-core` into `libp2p-swarm`. Given that they
are no longer exposed via `Network`, they can be treated as an
implementation detail of `libp2p-swarm` and `Swarm`.
This change does not include any behavioural changes.
This change has the followin benefits:
- Removal of `NetworkEvent`, which was mostly an isomorphism of
`SwarmEvent`.
- Removal of the never-directly-used `Network` abstraction.
- Removal of now obsolete verbose `Peer` (`core/src/network/peer.rs`)
construct.
- Removal of `libp2p-core` `DialOpts`, which is a direct mapping of
`libp2p-swarm` `DialOpts`.
- Allowing breaking changes to the connection handling and `Swarm` API
interface without a breaking change in `libp2p-core` and thus a
without a breaking change in `/transport` protocols.
This change enables the following potential future changes:
- Removal of `NodeHandler` and `ConnectionHandler`. Thus allowing to
rename `ProtocolsHandler` into `ConnectionHandler`.
- Moving `NetworkBehaviour` and `ProtocolsHandler` into `libp2p-core`,
having `libp2p-xxx` protocol crates only depend on `libp2p-core` and
thus allowing general breaking changes to `Swarm` without breaking all
`libp2p-xxx` crates.
There are 3 ways to close a connection:
1. `ProtocolsHandlerEvent::Close`
2. `KeepAlive::No` via `ProtocolsHandler::connection_keep_alive`
3. `NetworkBehaviourAction::CloseConnection`
This commit references (2) as an alternative to (1) in the documentation
of (1).
Previously, the negotiated PeerId was included in the swarm event and
inject_dial_failure’s arguments while the expected one was absent. This
patch adds the negotiated PeerId to the DialError and includes the expected
one in the notifications.
Co-authored-by: Roland Kuhn <rk@rkuhn.info>
Allows `NetworkBehaviour` implementations to dial a peer, but instruct
the dialed connection to be upgraded as if it were the listening
endpoint.
This is needed when establishing direct connections through NATs and/or
Firewalls (hole punching). When hole punching via TCP (QUIC is different
but similar) both ends dial the other at the same time resulting in a
simultaneously opened TCP connection. To disambiguate who is the dialer
and who the listener there are two options:
1. Use the Simultaneous Open Extension of Multistream Select. See
[sim-open] specification and [sim-open-rust] Rust implementation.
2. Disambiguate the role (dialer or listener) based on the role within
the DCUtR [dcutr] protocol. More specifically the node initiating the
DCUtR process will act as a listener and the other as a dialer.
This commit enables (2), i.e. enables the DCUtR protocol to specify the
role used once the connection is established.
While on the positive side (2) requires one round trip less than (1), on
the negative side (2) only works for coordinated simultaneous dials.
I.e. when a simultaneous dial happens by chance, and not coordinated via
DCUtR, the connection attempt fails when only (2) is in place.
[sim-open]: https://github.com/libp2p/specs/blob/master/connections/simopen.md
[sim-open-rust]: https://github.com/libp2p/rust-libp2p/pull/2066
[dcutr]: https://github.com/libp2p/specs/blob/master/relay/DCUtR.md
Since https://github.com/libp2p/rust-libp2p/pull/2248 dial attempts are
no longer reported per address, but instead reported for all addresses
of a single dial at once.
This commit updates the comment accordingly.
Enable a `NetworkBehaviour` or a user via `Swarm::dial` to override the
dial concurrency factor per dial. This is especially relevant in the
case of libp2p-autonat where one wants to probe addresses in sequence to
reduce the amount of work a remote peer can force onto the local node.
To enable the above, this commit also:
- Introduces `libp2p_core::DialOpts` mirroring `libp2p_swarm::DialOpts`.
Passed as an argument to `Network::dial`.
- Removes `Peer::dial` in favor of `Network::dial`.
- Simplifies `Swarm::dial_with_handler`.
The introduction of `libp2p_core::DialOpts` will be useful beyond this
feature, e.g. for https://github.com/libp2p/rust-libp2p/pull/2363.
In the long run I would like to move and merge `libp2p_core::Network`
and `libp2p_core::Pool` into `libp2p_swarm::Swarm` thus deduplicating
`libp2p_core::DialOpts` and `libp2p_swarm::DialOpts`.
Fixes#2385.
Handling multiple interfaces in mdns. The socket logic was moved into an
instance while the mdns behaviour watches for interface changes and creates new
instances with a dedicated send/recv socket.
Co-authored-by: Max Inden <mail@max-inden.de>
Implement `NetworkBehaviour` on `either::Either<L, R>` where both L
and R both implement `NetworkBehaviour`.
Add NetworkBehaviour derive tests for Either and Toggle
Co-authored-by: Max Inden <mail@max-inden.de>
Don't report events of a connection to the `NetworkBehaviour`, if connection has
been established while the remote peer was banned. Among other guarantees this
upholds that `NetworkBehaviour::inject_event` is never called without a previous
`NetworkBehaviour::inject_connection_established` for said connection.
Co-authored-by: Max Inden <mail@max-inden.de>
Enable advanced dialing requests both on `Swarm` and via
`NetworkBehaviourAction`. Users can now trigger a dial with a specific
set of addresses, optionally extended via
`NetworkBehaviour::addresses_of_peer`. In addition the whole process is
now modelled in a type safe way via the builder pattern.
Example of a `NetworkBehaviour` requesting a dial to a specific peer
with a set of addresses additionally extended through
`NetworkBehaviour::addresses_of_peer`:
```rust
NetworkBehaviourAction::Dial {
opts: DialOpts::peer_id(peer_id)
.condition(PeerCondition::Always)
.addresses(addresses)
.extend_addresses_through_behaviour()
.build(),
handler,
}
```
Example of a user requesting a dial to an unknown peer with a single
address via `Swarm`:
```rust
swarm1.dial(
DialOpts::unknown_peer_id()
.address(addr2.clone())
.build()
)
```
Changes needed to get libp2p to run via `wasm32-unknown-unknown` in the browser
(both main thread and inside web workers).
Replaces wasm-timer with futures-timer and instant.
Co-authored-by: Oliver Wangler <oliver@wngr.de>
With https://github.com/libp2p/rust-libp2p/pull/2248 a connection task
`await`s sending an event to the behaviour before polling for new events
from the behaviour [1].
When `Swarm::poll` is unable to deliver an event to a connection task it
returns `Poll::Pending` even though (a) polling `Swarm::network` might be
able to make progress (`network_not_ready` being `false`) and (b) it
does not register a waker to be woken up [2].
In combination this can lead to a deadlock where a connection task waits
to send an event to the behaviour and `Swarm::poll` returns
`Poll::Pending` failing to send an event to the connection task, not
registering a waiker in order to be polled again.
With this commit `Swarm::poll` will only return `Poll::Pending`, when
failing to deliver an event to a connection task, if the network is
unable to make progress (i.e. `network_not_ready` being `true`).
In the long-run `Swarm::poll` should likely be redesigned, prioritizing
the behaviour over the network, given the former is the control plane
and the latter potentially yields new work from the outside.
[1]: ca1b7cf043/core/src/connection/pool/task.rs (L224-L232)
[2]: ca1b7cf043/swarm/src/lib.rs (L756-L783)
Concurrently dial address candidates within a single dial attempt.
Main motivation for this feature is to increase success rate on hole punching
(see https://github.com/libp2p/rust-libp2p/issues/1896#issuecomment-885894496
for details). Though, as a nice side effect, as one would expect, it does
improve connection establishment time.
Cleanups and fixes done along the way:
- Merge `pool.rs` and `manager.rs`.
- Instead of manually implementing state machines in `task.rs` use
`async/await`.
- Fix bug where `NetworkBehaviour::inject_connection_closed` is called without a
previous `NetworkBehaviour::inject_connection_established` (see
https://github.com/libp2p/rust-libp2p/issues/2242).
- Return handler to behaviour on incoming connection limit error. Missed in
https://github.com/libp2p/rust-libp2p/issues/2242.
