chore: release 0.37.0 (#1178)

Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>

.aegir.js

@@ -1,59 +1,63 @@
-'use strict'
+import { WebSockets } from '@libp2p/websockets'
+import { Mplex } from '@libp2p/mplex'
+import { NOISE } from '@chainsafe/libp2p-noise'
+import { pipe } from 'it-pipe'
+import { createFromJSON } from '@libp2p/peer-id-factory'
 
-const Libp2p = require('./src')
-const { MULTIADDRS_WEBSOCKETS } = require('./test/fixtures/browser')
-const Peers = require('./test/fixtures/peers')
-const PeerId = require('peer-id')
-const WebSockets = require('libp2p-websockets')
-const Muxer = require('libp2p-mplex')
-const { NOISE: Crypto } = require('libp2p-noise')
-const pipe = require('it-pipe')
-let libp2p
-
-const before = async () => {
-  // Use the last peer
-  const peerId = await PeerId.createFromJSON(Peers[Peers.length - 1])
-
-  libp2p = new Libp2p({
-    addresses: {
-      listen: [MULTIADDRS_WEBSOCKETS[0]]
-    },
-    peerId,
-    modules: {
-      transport: [WebSockets],
-      streamMuxer: [Muxer],
-      connEncryption: [Crypto]
-    },
-    config: {
-      relay: {
-        enabled: true,
-        hop: {
-          enabled: true,
-          active: false
-        }
-      }
-    }
-  })
-  // Add the echo protocol
-  libp2p.handle('/echo/1.0.0', ({ stream }) => pipe(stream, stream))
-
-  await libp2p.start()
-}
-
-const after = async () => {
-  await libp2p.stop()
-}
-
-module.exports = {
-  bundlesize: { maxSize: '225kB' },
-  hooks: {
-    pre: before,
-    post: after
+/** @type {import('aegir').PartialOptions} */
+export default {
+  build: {
+    bundlesizeMax: '147kB'
   },
-  webpack: {
-    node: {
-      // needed by bcrypto
-      Buffer: true
+  test: {
+    before: async () => {
+      // use dynamic import because we only want to reference these files during the test run, e.g. after building
+      const { createLibp2p } = await import('./dist/src/index.js')
+      const { MULTIADDRS_WEBSOCKETS } = await import('./dist/test/fixtures/browser.js')
+      const { Plaintext } = await import('./dist/src/insecure/index.js')
+      const { default: Peers } = await import('./dist/test/fixtures/peers.js')
+
+      // Use the last peer
+      const peerId = await createFromJSON(Peers[Peers.length - 1])
+      const libp2p = await createLibp2p({
+        addresses: {
+          listen: [MULTIADDRS_WEBSOCKETS[0]]
+        },
+        peerId,
+        transports: [
+          new WebSockets()
+        ],
+        streamMuxers: [
+          new Mplex()
+        ],
+        connectionEncryption: [
+          NOISE,
+          new Plaintext()
+        ],
+        relay: {
+          enabled: true,
+          hop: {
+            enabled: true,
+            active: false
+          }
+        },
+        nat: {
+          enabled: false
+        }
+      })
+      // Add the echo protocol
+      await libp2p.handle('/echo/1.0.0', ({ stream }) => {
+        pipe(stream, stream)
+          .catch() // sometimes connections are closed before multistream-select finishes which causes an error
+      })
+      await libp2p.start()
+
+      return {
+        libp2p
+      }
+    },
+    after: async (_, before) => {
+      await before.libp2p.stop()
     }
   }
 }

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,5 @@
+blank_issues_enabled: false
+contact_links:
+ - name: libp2p Official Forum
+   url: https://discuss.libp2p.io
+   about: For general questions, support requests and discussions

.github/ISSUE_TEMPLATE/open_an_issue.md

@@ -0,0 +1,55 @@
+---
+name: Open an issue
+about: For reporting bugs or errors in the JavaScript libp2p implementation
+title: ''
+labels: need/triage
+assignees: ''
+---
+
+<!--
+Thank you for reporting an issue.
+
+This issue tracker is for bugs found within the JavaScript implementation of libp2p.
+
+If you are asking a question about how to use libp2p, please ask on https://discuss.libp2p.io
+
+Otherwise please fill in as much of the template below as possible.
+-->
+
+- **Version**:
+<!--
+Check package.json version
+-->
+
+- **Platform**:
+<!--
+Output of `uname -a` (UNIX), or version and 32 or 64-bit (Windows). If using in a Browser, please share the browser version as well
+-->
+
+- **Subsystem**:
+<!--
+If known, please specify affected core module name (e.g Dialer, Pubsub, Relay etc)
+-->
+
+#### Severity:
+<!--
+One of following:
+  Critical - System crash, application panic.
+  High - The main functionality of the application does not work, API breakage, repo format breakage, etc.
+  Medium - A non-essential functionality does not work, performance issues, etc.
+  Low - An optional functionality does not work.
+  Very Low - Translation or documentation mistake. Something that won't give anyone a bad day.
+-->
+
+#### Description:
+<!--
+- What you did
+- What happened
+- What you expected to happen
+-->
+
+#### Steps to reproduce the error:
+<!--
+If possible, please provide code that demonstrates the problem, keeping it as simple and free of external dependencies as you are able
+-->
+

.github/ISSUE_TEMPLATE/release.md

@@ -25,8 +25,6 @@
     - [ ] [js-ipfs](https://github.com/ipfs/js-ipfs)
 - Documentation
   - [ ] Ensure that README.md is up to date
-  - [ ] Ensure that all the examples run
-  - [ ] Ensure [libp2p/js-libp2p-examples](https://github.com/libp2p/js-libp2p-examples) is updated
   - [ ] Ensure that [libp2p/docs](https://github.com/libp2p/docs) is updated
 - Communication
   - [ ] Create the release issue

.github/dependabot.yml

@@ -0,0 +1,8 @@
+version: 2
+updates:
+- package-ecosystem: npm
+  directory: "/"
+  schedule:
+    interval: daily
+    time: "10:00"
+  open-pull-requests-limit: 10

.github/workflows/examples.yml

@@ -0,0 +1,66 @@
+name: examples
+on:
+  push:
+    branches:
+      - master
+  pull_request:
+    branches:
+      - '**'
+
+jobs:
+
+  build:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v2
+    - uses: actions/setup-node@v2
+      with:
+        node-version: lts/*
+    - uses: ipfs/aegir/actions/cache-node-modules@master
+      with:
+        directories: |
+          ./examples/node_modules
+          ~/.cache
+        build: |
+          cd examples
+          npm i
+          npx playwright install
+        cache_name: cache-examples
+
+  test-example:
+    needs: build
+    runs-on: ubuntu-latest
+    strategy:
+      matrix:
+        example: [
+          chat,
+          connection-encryption,
+          discovery-mechanisms,
+          echo,
+          libp2p-in-the-browser,
+          peer-and-content-routing,
+          pnet,
+          protocol-and-stream-muxing,
+          pubsub,
+          transports,
+          webrtc-direct
+        ]
+      fail-fast: true
+    steps:
+      - uses: actions/checkout@v2
+      - uses: actions/setup-node@v2
+        with:
+          node-version: lts/*
+      - uses: ipfs/aegir/actions/cache-node-modules@master
+        with:
+          directories: |
+            ./examples/node_modules
+            ~/.cache
+          build: |
+            cd examples
+            npm i
+            npx playwright install
+          cache_name: cache-examples
+      - run: |
+          cd examples
+          npm run test -- ${{ matrix.example }}

.github/workflows/main.yml

@@ -0,0 +1,172 @@
+name: ci
+on:
+  push:
+    branches:
+      - master
+  pull_request:
+    branches:
+      - '**'
+
+jobs:
+
+  check:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v2
+    - uses: actions/setup-node@v2
+      with:
+        node-version: lts/*
+    - uses: ipfs/aegir/actions/cache-node-modules@master
+    - run: npm run --if-present lint
+    - run: npm run --if-present dep-check
+
+  test-node:
+    needs: check
+    runs-on: ${{ matrix.os }}
+    strategy:
+      matrix:
+        os: [windows-latest, ubuntu-latest, macos-latest]
+        node: [16]
+      fail-fast: true
+    steps:
+      - uses: actions/checkout@v2
+      - uses: actions/setup-node@v2
+        with:
+          node-version: ${{ matrix.node }}
+      - uses: ipfs/aegir/actions/cache-node-modules@master
+      - run: npm run --if-present test:node
+      - uses: codecov/codecov-action@f32b3a3741e1053eb607407145bc9619351dc93b # v2.1.0
+        with:
+          directory: ./.nyc_output
+          flags: node
+
+  test-chrome:
+    needs: check
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v2
+      - uses: actions/setup-node@v2
+        with:
+          node-version: lts/*
+      - uses: ipfs/aegir/actions/cache-node-modules@master
+      - run: npm run --if-present test:chrome
+      - uses: codecov/codecov-action@f32b3a3741e1053eb607407145bc9619351dc93b # v2.1.0
+        with:
+          directory: ./.nyc_output
+          flags: chrome
+
+  test-chrome-webworker:
+    needs: check
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v2
+      - uses: actions/setup-node@v2
+        with:
+          node-version: lts/*
+      - uses: ipfs/aegir/actions/cache-node-modules@master
+      - run: npm run --if-present test:chrome-webworker
+      - uses: codecov/codecov-action@f32b3a3741e1053eb607407145bc9619351dc93b # v2.1.0
+        with:
+          directory: ./.nyc_output
+          flags: chrome-webworker
+
+  test-firefox:
+    needs: check
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v2
+      - uses: actions/setup-node@v2
+        with:
+          node-version: lts/*
+      - uses: ipfs/aegir/actions/cache-node-modules@master
+      - run: npm run --if-present test:firefox
+      - uses: codecov/codecov-action@f32b3a3741e1053eb607407145bc9619351dc93b # v2.1.0
+        with:
+          directory: ./.nyc_output
+          flags: firefox
+
+  test-firefox-webworker:
+    needs: check
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v2
+      - uses: actions/setup-node@v2
+        with:
+          node-version: lts/*
+      - uses: ipfs/aegir/actions/cache-node-modules@master
+      - run: npm run --if-present test:firefox-webworker
+      - uses: codecov/codecov-action@f32b3a3741e1053eb607407145bc9619351dc93b # v2.1.0
+        with:
+          directory: ./.nyc_output
+          flags: firefox-webworker
+
+  test-electron-main:
+    needs: check
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v2
+      - uses: actions/setup-node@v2
+        with:
+          node-version: lts/*
+      - uses: ipfs/aegir/actions/cache-node-modules@master
+      - run: npx xvfb-maybe npm run --if-present test:electron-main
+      - uses: codecov/codecov-action@f32b3a3741e1053eb607407145bc9619351dc93b # v2.1.0
+        with:
+          directory: ./.nyc_output
+          flags: electron-main
+
+  test-electron-renderer:
+    needs: check
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v2
+      - uses: actions/setup-node@v2
+        with:
+          node-version: lts/*
+      - uses: ipfs/aegir/actions/cache-node-modules@master
+      - run: npx xvfb-maybe npm run --if-present test:electron-renderer
+      - uses: codecov/codecov-action@f32b3a3741e1053eb607407145bc9619351dc93b # v2.1.0
+        with:
+          directory: ./.nyc_output
+          flags: electron-renderer
+
+  test-interop:
+    needs: check
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v2
+      - uses: actions/setup-node@v2
+        with:
+          node-version: lts/*
+      - uses: ipfs/aegir/actions/cache-node-modules@master
+      - run: npm run test:interop -- --bail
+
+  release:
+    runs-on: ubuntu-latest
+    needs: [test-node, test-chrome, test-chrome-webworker, test-firefox, test-firefox-webworker, test-electron-main, test-electron-renderer, test-interop]
+    if: github.event_name == 'push' && github.ref == 'refs/heads/master'
+    steps:
+      - uses: GoogleCloudPlatform/release-please-action@v2
+        id: release
+        with:
+          token: ${{ secrets.GITHUB_TOKEN }}
+          release-type: node
+          bump-minor-pre-major: true
+      - uses: actions/checkout@v2
+      - uses: actions/setup-node@v2
+        with:
+          node-version: lts/*
+          registry-url: 'https://registry.npmjs.org'
+      - uses: ipfs/aegir/actions/cache-node-modules@master
+      - if: ${{ steps.release.outputs.release_created }}
+        name: Run release version
+        run: npm publish
+        env:
+          NODE_AUTH_TOKEN: ${{ secrets.NPM_TOKEN }}
+      - if: ${{ !steps.release.outputs.release_created }}
+        name: Run release rc
+        run: |
+            npm version `node -p -e "require('./package.json').version"`-`git rev-parse --short HEAD` --no-git-tag-version
+            npm publish --tag next
+        env:
+          NODE_AUTH_TOKEN: ${{ secrets.NPM_TOKEN }}

.gitignore

@@ -4,6 +4,7 @@ docs
 test/repo-tests*
 **/bundle.js
 .cache
+.parcel-cache
 
 # Logs
 logs

.travis.yml

@@ -1,50 +0,0 @@
-language: node_js
-cache: npm
-stages:
-  - check
-  - test
-  - cov
-
-node_js:
-  - 'lts/*'
-  - 'stable'
-
-os:
-  - linux
-  - osx
-
-script: npx nyc -s npm run test:node -- --bail
-after_success: npx nyc report --reporter=text-lcov > coverage.lcov && npx codecov
-
-jobs:
-  include:
-    - stage: check
-      script:
-        - npx aegir build --bundlesize
-        # Remove pull libs once ping is async
-        - npx aegir dep-check -- -i pull-handshake -i pull-stream
-        - npm run lint
-
-    - stage: test
-      name: chrome
-      addons:
-        chrome: stable
-      script:
-        - npx aegir test -t browser -t webworker
-
-    - stage: test
-      name: firefox
-      addons:
-        firefox: latest
-      script:
-        - npx aegir test -t browser -t webworker -- --browsers FirefoxHeadless
-
-    - stage: test
-      name: interop
-      script:
-        - cd node_modules/interop-libp2p
-        - npm install
-        - LIBP2P_JS=${TRAVIS_BUILD_DIR}/src/index.js npx aegir test -t node --bail
-
-notifications:
-  email: false

CHANGELOG.md

@@ -1,3 +1,657 @@
+## [0.35.8](https://github.com/libp2p/js-libp2p/compare/v0.35.7...v0.35.8) (2021-12-29)
+
+
+### Bug Fixes
+
+* do not wait for autodial start ([#1089](https://github.com/libp2p/js-libp2p/issues/1089)) ([79b3cfc](https://github.com/libp2p/js-libp2p/commit/79b3cfc6ad02ecc76fe23a3c3ff2d0b32a0ae4a8))
+* increase listeners on any-signal ([#1084](https://github.com/libp2p/js-libp2p/issues/1084)) ([f18fc80](https://github.com/libp2p/js-libp2p/commit/f18fc80b70bf7b6b26fffa70b0a8d0502a6c4801))
+* look for final peer event instead of peer response ([#1092](https://github.com/libp2p/js-libp2p/issues/1092)) ([d2b7ec0](https://github.com/libp2p/js-libp2p/commit/d2b7ec0f6be0ee80f2c963279a8ec2385059a889))
+* record tracked map clears ([#1085](https://github.com/libp2p/js-libp2p/issues/1085)) ([b4b4324](https://github.com/libp2p/js-libp2p/commit/b4b432406ebc08ef2fc3a1922c64cde7c9060cae))
+
+
+
+## [0.37.0](https://www.github.com/libp2p/js-libp2p/compare/v0.36.2...v0.37.0) (2022-05-16)
+
+
+### ⚠ BREAKING CHANGES
+
+* types are no longer hand crafted, this module is now ESM only
+
+### Features
+
+* convert to typescript ([#1172](https://www.github.com/libp2p/js-libp2p/issues/1172)) ([199395d](https://www.github.com/libp2p/js-libp2p/commit/199395de4d8139cc77d0b408626f37c9b8520d28))
+
+
+### Bug Fixes
+
+* add transport manager to exports map and fix docs ([#1182](https://www.github.com/libp2p/js-libp2p/issues/1182)) ([cc60cfd](https://www.github.com/libp2p/js-libp2p/commit/cc60cfde1a0907ca68f658f6de5362a708189222))
+* emit peer:connect after all ([#1171](https://www.github.com/libp2p/js-libp2p/issues/1171)) ([d16817c](https://www.github.com/libp2p/js-libp2p/commit/d16817ca443443e88803ee8096d45debb14af91b))
+* encode enums correctly ([#1210](https://www.github.com/libp2p/js-libp2p/issues/1210)) ([4837430](https://www.github.com/libp2p/js-libp2p/commit/4837430d8bcdbee0865eeba6fe694bc71fc6c9bb))
+* expose getPublicKey ([#1188](https://www.github.com/libp2p/js-libp2p/issues/1188)) ([1473044](https://www.github.com/libp2p/js-libp2p/commit/147304449e5f8d3acb8b00bdd9588b56830667c6))
+* expose metrics and registrar, use dht for peer discovery ([#1183](https://www.github.com/libp2p/js-libp2p/issues/1183)) ([64bfcee](https://www.github.com/libp2p/js-libp2p/commit/64bfcee5093b368df0b381f78afc2ddff3d339a9))
+* simplify pnet exports ([#1213](https://www.github.com/libp2p/js-libp2p/issues/1213)) ([3148060](https://www.github.com/libp2p/js-libp2p/commit/31480603f3e17d838d2685573995218a1e678e7a))
+* update deps ([#1181](https://www.github.com/libp2p/js-libp2p/issues/1181)) ([8cca8e4](https://www.github.com/libp2p/js-libp2p/commit/8cca8e4bfc6a339e58b5a5efa8a84fd891aa08ee))
+* update interfaces ([#1207](https://www.github.com/libp2p/js-libp2p/issues/1207)) ([da3d19b](https://www.github.com/libp2p/js-libp2p/commit/da3d19b30977fd2c7e77d92aa8914b13e3179aaa))
+* update pubsub interfaces ([#1194](https://www.github.com/libp2p/js-libp2p/issues/1194)) ([fab4f13](https://www.github.com/libp2p/js-libp2p/commit/fab4f1385cf61b7b16719b9aacdfe03146a3f260))
+* update to new interfaces ([#1206](https://www.github.com/libp2p/js-libp2p/issues/1206)) ([a15254f](https://www.github.com/libp2p/js-libp2p/commit/a15254fdd478a336edf1e1196b721dc56888b2ea))
+* use placeholder dht/pubsub ([#1193](https://www.github.com/libp2p/js-libp2p/issues/1193)) ([5397137](https://www.github.com/libp2p/js-libp2p/commit/5397137c654dfdec431e0c9ba4b1ff9dee19abf1))
+
+### [0.36.2](https://www.github.com/libp2p/js-libp2p/compare/v0.36.1...v0.36.2) (2022-01-26)
+
+
+### Bug Fixes
+
+* reject connections when not running ([#1146](https://www.github.com/libp2p/js-libp2p/issues/1146)) ([902f10d](https://www.github.com/libp2p/js-libp2p/commit/902f10d58d1062e812eb27aa0e2256e3fde5d3f6))
+
+### [0.36.1](https://www.github.com/libp2p/js-libp2p/compare/v0.36.0...v0.36.1) (2022-01-25)
+
+
+### Bug Fixes
+
+* await unhandle of protocols ([#1144](https://www.github.com/libp2p/js-libp2p/issues/1144)) ([d44bd90](https://www.github.com/libp2p/js-libp2p/commit/d44bd9094fe9545054eb8eff68f81bc52ece03e7))
+
+## [0.36.0](https://www.github.com/libp2p/js-libp2p/compare/v0.35.8...v0.36.0) (2022-01-25)
+
+
+### ⚠ BREAKING CHANGES
+
+* abort-controller dep is gone from dependency tree
+* `libp2p.handle`, `libp2p.registrar.register` and the peerstore methods have become async
+
+### Features
+
+* add fetch protocol ([#1036](https://www.github.com/libp2p/js-libp2p/issues/1036)) ([d8ceb0b](https://www.github.com/libp2p/js-libp2p/commit/d8ceb0bc66fe225d1335d3f05b9a3a30983c2a57))
+* async peerstore backed by datastores ([#1058](https://www.github.com/libp2p/js-libp2p/issues/1058)) ([978eb36](https://www.github.com/libp2p/js-libp2p/commit/978eb3676fad5d5d50ddb28d1a7868f448cbb20b))
+* connection gater ([#1142](https://www.github.com/libp2p/js-libp2p/issues/1142)) ([ff32eba](https://www.github.com/libp2p/js-libp2p/commit/ff32eba6a0fa222af1a7a46775d5e0346ad6ebdf))
+
+
+### Bug Fixes
+
+* cache build artefacts ([#1091](https://www.github.com/libp2p/js-libp2p/issues/1091)) ([5043cd5](https://www.github.com/libp2p/js-libp2p/commit/5043cd56435a264e83db4fb8388d33e9a0442fff))
+* catch errors during identify ([#1138](https://www.github.com/libp2p/js-libp2p/issues/1138)) ([12f1bb0](https://www.github.com/libp2p/js-libp2p/commit/12f1bb0aeec4b639bd2af05807215f3b4284e379))
+* import uint8arrays package in example ([#1083](https://www.github.com/libp2p/js-libp2p/issues/1083)) ([c3700f5](https://www.github.com/libp2p/js-libp2p/commit/c3700f55d5a0b62182d683ca37258887b24065b9))
+* make tests more reliable ([#1139](https://www.github.com/libp2p/js-libp2p/issues/1139)) ([b7e8706](https://www.github.com/libp2p/js-libp2p/commit/b7e87066a69970f1adca4ba552c7fdf624916a7e))
+* prevent auto-dialer from dialing self ([#1104](https://www.github.com/libp2p/js-libp2p/issues/1104)) ([9b22c6e](https://www.github.com/libp2p/js-libp2p/commit/9b22c6e2f987a20c6639cd07f31fe9c824e24923))
+* remove abort-controller dep ([#1095](https://www.github.com/libp2p/js-libp2p/issues/1095)) ([0a4dc54](https://www.github.com/libp2p/js-libp2p/commit/0a4dc54d084c901df47cce1788bd5922090ee037))
+* try all peer addresses when dialing a relay ([#1140](https://www.github.com/libp2p/js-libp2p/issues/1140)) ([63aa480](https://www.github.com/libp2p/js-libp2p/commit/63aa480800974515f44d3b7e013da9c8ccaae8ad))
+* update any-signal and timeout-abort-controller ([#1128](https://www.github.com/libp2p/js-libp2p/issues/1128)) ([e0354b4](https://www.github.com/libp2p/js-libp2p/commit/e0354b4c6b95bb90656b868849182eb3efddf096))
+* update multistream select ([#1136](https://www.github.com/libp2p/js-libp2p/issues/1136)) ([00e4959](https://www.github.com/libp2p/js-libp2p/commit/00e49592a356e39b20c889d5f40b9bb37d4bf293))
+* update node-forge ([#1133](https://www.github.com/libp2p/js-libp2p/issues/1133)) ([a4bba35](https://www.github.com/libp2p/js-libp2p/commit/a4bba35948e1cd8dbe5147f2c8d6385b1fbb6fae))
+
+## [0.35.7](https://github.com/libp2p/js-libp2p/compare/v0.35.2...v0.35.7) (2021-12-24)
+
+
+### Bug Fixes
+
+* add tracked map ([#1069](https://github.com/libp2p/js-libp2p/issues/1069)) ([b425fa1](https://github.com/libp2p/js-libp2p/commit/b425fa12304def2a007d43a0aa445c28b766ed02))
+* clean up pending dial targets ([#1059](https://github.com/libp2p/js-libp2p/issues/1059)) ([bdc9f16](https://github.com/libp2p/js-libp2p/commit/bdc9f16d0cbe56ccf26822f11068e7795bcef046))
+* fix uncaught promise rejection when finding peers ([#1044](https://github.com/libp2p/js-libp2p/issues/1044)) ([3b683e7](https://github.com/libp2p/js-libp2p/commit/3b683e715686163e229b7b5c3a892327dfd4fc63))
+* increase the maxlisteners for timeout controllers ([#1065](https://github.com/libp2p/js-libp2p/issues/1065)) ([09a0f94](https://github.com/libp2p/js-libp2p/commit/09a0f940df7fdb4ece34604e85693709df5c213e))
+* main ci ([#1079](https://github.com/libp2p/js-libp2p/issues/1079)) ([d1c48dc](https://github.com/libp2p/js-libp2p/commit/d1c48dcbeded828f2dd3044cc9aed3f17f02846d))
+* make error codes consistent ([#1054](https://github.com/libp2p/js-libp2p/issues/1054)) ([b25e0fe](https://github.com/libp2p/js-libp2p/commit/b25e0fe5312db58a06c39500ae84c50fed3a93bd))
+* type definitions for big dialrequest and persistent peerstore ([#1078](https://github.com/libp2p/js-libp2p/issues/1078)) ([cb0d7d6](https://github.com/libp2p/js-libp2p/commit/cb0d7d6c99d179498f04e76df76e70e4f7d41c4c))
+
+
+### Features
+
+* allow per-component metrics to be collected ([#1061](https://github.com/libp2p/js-libp2p/issues/1061)) ([2f0b311](https://github.com/libp2p/js-libp2p/commit/2f0b311df7127aa44512c2008142d4ca30268986)), closes [#1060](https://github.com/libp2p/js-libp2p/issues/1060)
+
+
+
+## [0.35.6](https://github.com/libp2p/js-libp2p/compare/v0.35.5...v0.35.6) (2021-12-18)
+
+
+### Bug Fixes
+
+* increase the maxlisteners for timeout controllers ([#1065](https://github.com/libp2p/js-libp2p/issues/1065)) ([09a0f94](https://github.com/libp2p/js-libp2p/commit/09a0f940df7fdb4ece34604e85693709df5c213e))
+
+
+
+## [0.35.5](https://github.com/libp2p/js-libp2p/compare/v0.35.4...v0.35.5) (2021-12-15)
+
+
+
+## [0.35.4](https://github.com/libp2p/js-libp2p/compare/v0.35.3...v0.35.4) (2021-12-15)
+
+
+### Features
+
+* allow per-component metrics to be collected ([#1061](https://github.com/libp2p/js-libp2p/issues/1061)) ([2f0b311](https://github.com/libp2p/js-libp2p/commit/2f0b311df7127aa44512c2008142d4ca30268986)), closes [#1060](https://github.com/libp2p/js-libp2p/issues/1060)
+
+
+
+## [0.35.3](https://github.com/libp2p/js-libp2p/compare/v0.35.2...v0.35.3) (2021-12-13)
+
+
+### Bug Fixes
+
+* clean up pending dial targets ([#1059](https://github.com/libp2p/js-libp2p/issues/1059)) ([bdc9f16](https://github.com/libp2p/js-libp2p/commit/bdc9f16d0cbe56ccf26822f11068e7795bcef046))
+* fix uncaught promise rejection when finding peers ([#1044](https://github.com/libp2p/js-libp2p/issues/1044)) ([3b683e7](https://github.com/libp2p/js-libp2p/commit/3b683e715686163e229b7b5c3a892327dfd4fc63))
+* make error codes consistent ([#1054](https://github.com/libp2p/js-libp2p/issues/1054)) ([b25e0fe](https://github.com/libp2p/js-libp2p/commit/b25e0fe5312db58a06c39500ae84c50fed3a93bd))
+
+
+
+## [0.35.2](https://github.com/libp2p/js-libp2p/compare/v0.33.0...v0.35.2) (2021-12-06)
+
+
+### Bug Fixes
+
+* do not let closest peers run forever ([#1047](https://github.com/libp2p/js-libp2p/issues/1047)) ([91c2ec9](https://github.com/libp2p/js-libp2p/commit/91c2ec9856a3e972b7b2c9c4d9a4eda1d431c7ef))
+* increase maxlisteners on event target ([#1050](https://github.com/libp2p/js-libp2p/issues/1050)) ([b70fb43](https://github.com/libp2p/js-libp2p/commit/b70fb43427b47df079b55929ec8956f69cbda966)), closes [#900](https://github.com/libp2p/js-libp2p/issues/900)
+* private ip ts compile has no call signatures ([#1020](https://github.com/libp2p/js-libp2p/issues/1020)) ([77d7cb8](https://github.com/libp2p/js-libp2p/commit/77d7cb8f0815f2cdd3bfdfa8b641a7a186fe9520))
+* stop dht before connection manager ([#1041](https://github.com/libp2p/js-libp2p/issues/1041)) ([3a9d5f6](https://github.com/libp2p/js-libp2p/commit/3a9d5f64d96719ebb4d3b083c4f5832db4fa0816)), closes [#1039](https://github.com/libp2p/js-libp2p/issues/1039)
+
+
+### chore
+
+* update peer id and libp2p crypto ([#1042](https://github.com/libp2p/js-libp2p/issues/1042)) ([9cbf36f](https://github.com/libp2p/js-libp2p/commit/9cbf36fcb54099e6fed35ceccc4a2376f0926c1f))
+
+
+### Features
+
+* update dht ([#1009](https://github.com/libp2p/js-libp2p/issues/1009)) ([2f598eb](https://github.com/libp2p/js-libp2p/commit/2f598eba09cff4301474af08196158065e3602d8))
+
+
+### BREAKING CHANGES
+
+* requires node 15+
+* libp2p-kad-dht has a new event-based API which is exposed as `_dht`
+
+
+
+## [0.35.1](https://github.com/libp2p/js-libp2p/compare/v0.35.0...v0.35.1) (2021-12-03)
+
+
+### Bug Fixes
+
+* do not let closest peers run forever ([#1047](https://github.com/libp2p/js-libp2p/issues/1047)) ([91c2ec9](https://github.com/libp2p/js-libp2p/commit/91c2ec9856a3e972b7b2c9c4d9a4eda1d431c7ef))
+
+
+
+# [0.35.0](https://github.com/libp2p/js-libp2p/compare/v0.34.0...v0.35.0) (2021-12-02)
+
+
+### Bug Fixes
+
+* stop dht before connection manager ([#1041](https://github.com/libp2p/js-libp2p/issues/1041)) ([3a9d5f6](https://github.com/libp2p/js-libp2p/commit/3a9d5f64d96719ebb4d3b083c4f5832db4fa0816)), closes [#1039](https://github.com/libp2p/js-libp2p/issues/1039)
+
+
+### chore
+
+* update peer id and libp2p crypto ([#1042](https://github.com/libp2p/js-libp2p/issues/1042)) ([9cbf36f](https://github.com/libp2p/js-libp2p/commit/9cbf36fcb54099e6fed35ceccc4a2376f0926c1f))
+
+
+### BREAKING CHANGES
+
+* requires node 15+
+
+
+
+# [0.34.0](https://github.com/libp2p/js-libp2p/compare/v0.33.0...v0.34.0) (2021-11-25)
+
+
+### Bug Fixes
+
+* private ip ts compile has no call signatures ([#1020](https://github.com/libp2p/js-libp2p/issues/1020)) ([77d7cb8](https://github.com/libp2p/js-libp2p/commit/77d7cb8f0815f2cdd3bfdfa8b641a7a186fe9520))
+
+
+### Features
+
+* update dht ([#1009](https://github.com/libp2p/js-libp2p/issues/1009)) ([2f598eb](https://github.com/libp2p/js-libp2p/commit/2f598eba09cff4301474af08196158065e3602d8))
+
+
+### BREAKING CHANGES
+
+* libp2p-kad-dht has a new event-based API which is exposed as `_dht`
+
+
+
+# [0.33.0](https://github.com/libp2p/js-libp2p/compare/v0.32.5...v0.33.0) (2021-09-24)
+
+
+### chore
+
+* update datastore ([#990](https://github.com/libp2p/js-libp2p/issues/990)) ([83734ef](https://github.com/libp2p/js-libp2p/commit/83734ef52061ad61ddb5ca49aae27e3a8b937058))
+
+
+### BREAKING CHANGES
+
+* datastore implementations provided to libp2p must be compliant with interface-datastore@6.0.0
+
+
+
+## [0.32.5](https://github.com/libp2p/js-libp2p/compare/v0.32.4...v0.32.5) (2021-09-21)
+
+
+### Bug Fixes
+
+* move abortable-iterator to dependencies ([#992](https://github.com/libp2p/js-libp2p/issues/992)) ([122c89d](https://github.com/libp2p/js-libp2p/commit/122c89dd0df55a59edaae078e3dc7c31b5603715)), closes [#986](https://github.com/libp2p/js-libp2p/issues/986)
+
+
+
+## [0.32.4](https://github.com/libp2p/js-libp2p/compare/v0.32.3...v0.32.4) (2021-08-20)
+
+
+
+## [0.32.3](https://github.com/libp2p/js-libp2p/compare/v0.32.2...v0.32.3) (2021-08-16)
+
+
+### Bug Fixes
+
+* uint8arrays is a dep ([#964](https://github.com/libp2p/js-libp2p/issues/964)) ([ba2b4d4](https://github.com/libp2p/js-libp2p/commit/ba2b4d4b28f1d9940b457de344aed44537f9eabd))
+
+
+
+## [0.32.2](https://github.com/libp2p/js-libp2p/compare/v0.32.1...v0.32.2) (2021-08-13)
+
+
+### Bug Fixes
+
+* browser example ci ([3b33fb4](https://github.com/libp2p/js-libp2p/commit/3b33fb4b73ba8065e432fb59f758fe138fd23d9e))
+
+
+### Features
+
+* custom protocol name ([#962](https://github.com/libp2p/js-libp2p/issues/962)) ([ef24fab](https://github.com/libp2p/js-libp2p/commit/ef24fabf0269fd079888e92eedb458e23ef1c733))
+
+
+
+## [0.32.1](https://github.com/libp2p/js-libp2p/compare/v0.32.0...v0.32.1) (2021-07-22)
+
+
+### Bug Fixes
+
+* turn compliance tests into devDependency ([#960](https://github.com/libp2p/js-libp2p/issues/960)) ([0701de4](https://github.com/libp2p/js-libp2p/commit/0701de40b1ebdf319959846d8c4fdd30b3cf34a4))
+
+
+
+# [0.32.0](https://github.com/libp2p/js-libp2p/compare/v0.32.0-rc.0...v0.32.0) (2021-07-15)
+
+
+
+# [0.32.0-rc.0](https://github.com/libp2p/js-libp2p/compare/v0.31.7...v0.32.0-rc.0) (2021-07-09)
+
+
+### Bug Fixes
+
+* do not allow dial to large number of multiaddrs ([#954](https://github.com/libp2p/js-libp2p/issues/954)) ([af723b3](https://github.com/libp2p/js-libp2p/commit/af723b355e1ddf4aecf439f81c3aa67613d45fa4))
+
+
+### chore
+
+* update to new multiformats ([#948](https://github.com/libp2p/js-libp2p/issues/948)) ([13cf476](https://github.com/libp2p/js-libp2p/commit/13cf4761489d59b22924bb8ec2ec6dbe207b280c))
+
+
+### BREAKING CHANGES
+
+* uses the CID class from the new multiformats module
+
+Co-authored-by: Vasco Santos <vasco.santos@moxy.studio>
+
+
+
+## [0.31.7](https://github.com/libp2p/js-libp2p/compare/v0.31.6...v0.31.7) (2021-06-14)
+
+
+### Bug Fixes
+
+* chat example with new multiaddr ([#946](https://github.com/libp2p/js-libp2p/issues/946)) ([d8ba284](https://github.com/libp2p/js-libp2p/commit/d8ba2848833d9fb8a963d1b7c8d27062c6f829da))
+* dialer leaking resources after stopping ([#947](https://github.com/libp2p/js-libp2p/issues/947)) ([b291bc0](https://github.com/libp2p/js-libp2p/commit/b291bc06ec13feeb6e010730edfad754a3b2dc1b))
+
+
+
+## [0.31.6](https://github.com/libp2p/js-libp2p/compare/v0.31.5...v0.31.6) (2021-05-27)
+
+
+### Features
+
+* keychain rotate passphrase ([#944](https://github.com/libp2p/js-libp2p/issues/944)) ([478963a](https://github.com/libp2p/js-libp2p/commit/478963ad2d195444494c0acc54cb3847a29e117c))
+
+
+
+## [0.31.5](https://github.com/libp2p/js-libp2p/compare/v0.31.4...v0.31.5) (2021-05-12)
+
+
+### Bug Fixes
+
+* store remote agent and protocol version during identify ([#943](https://github.com/libp2p/js-libp2p/issues/943)) ([818d2b2](https://github.com/libp2p/js-libp2p/commit/818d2b2a98736f4242694479089396f6070cdad5))
+
+
+
+## [0.31.4](https://github.com/libp2p/js-libp2p/compare/v0.31.3...v0.31.4) (2021-05-12)
+
+
+### Bug Fixes
+
+* peerRouting.findPeer() trying to find self ([#941](https://github.com/libp2p/js-libp2p/issues/941)) ([a79c6b5](https://github.com/libp2p/js-libp2p/commit/a79c6b50d7fddbcdb1af53efae922cecad4c9a83))
+
+
+
+## [0.31.3](https://github.com/libp2p/js-libp2p/compare/v0.31.2...v0.31.3) (2021-05-04)
+
+
+
+## [0.31.2](https://github.com/libp2p/js-libp2p/compare/v0.31.1...v0.31.2) (2021-04-30)
+
+
+### Bug Fixes
+
+* moving averages record types ([#935](https://github.com/libp2p/js-libp2p/issues/935)) ([b5a9eb2](https://github.com/libp2p/js-libp2p/commit/b5a9eb208763efa027d0b4caae87c515b6f5869b))
+
+
+
+## [0.31.1](https://github.com/libp2p/js-libp2p/compare/v0.31.0...v0.31.1) (2021-04-30)
+
+
+### Bug Fixes
+
+* event emitter and interfaces types for discovery and routing ([#934](https://github.com/libp2p/js-libp2p/issues/934)) ([302bb90](https://github.com/libp2p/js-libp2p/commit/302bb9005891aa06b70a5f354bfac6b2d5a3c3b8))
+
+
+
+# [0.31.0](https://github.com/libp2p/js-libp2p/compare/v0.31.0-rc.7...v0.31.0) (2021-04-28)
+
+
+
+# [0.31.0-rc.7](https://github.com/libp2p/js-libp2p/compare/v0.31.0-rc.6...v0.31.0-rc.7) (2021-04-27)
+
+
+### Bug Fixes
+
+* address book guarantees no replicated entries are added ([#927](https://github.com/libp2p/js-libp2p/issues/927)) ([ac370fc](https://github.com/libp2p/js-libp2p/commit/ac370fc9679b51da8cee3791b6dd268d0695d136))
+
+
+
+# [0.31.0-rc.6](https://github.com/libp2p/js-libp2p/compare/v0.31.0-rc.5...v0.31.0-rc.6) (2021-04-22)
+
+
+### Bug Fixes
+
+* keychain optional pw and use interfaces for validators and selectors instead ([#924](https://github.com/libp2p/js-libp2p/issues/924)) ([88b0415](https://github.com/libp2p/js-libp2p/commit/88b04156bf614650c2b14d49b12e969c5eecf04d))
+
+
+
+# [0.31.0-rc.5](https://github.com/libp2p/js-libp2p/compare/v0.31.0-rc.4...v0.31.0-rc.5) (2021-04-21)
+
+
+### Bug Fixes
+
+* address book should not emit peer event if no addresses are known ([b4fb9b7](https://github.com/libp2p/js-libp2p/commit/b4fb9b7bf266ba03c4462c0a41b1c2691e4e88d4))
+* demand pubsub subclass instead of pubsub instance ([#922](https://github.com/libp2p/js-libp2p/issues/922)) ([086b0ec](https://github.com/libp2p/js-libp2p/commit/086b0ec0df2fac93845d0a0a6b2e2464e869afcd))
+* dht configuration selectors and validators ([#919](https://github.com/libp2p/js-libp2p/issues/919)) ([cc1f4af](https://github.com/libp2p/js-libp2p/commit/cc1f4af879a58e94538591851d0085ff98cd2641))
+
+
+
+# [0.31.0-rc.4](https://github.com/libp2p/js-libp2p/compare/v0.31.0-rc.3...v0.31.0-rc.4) (2021-04-20)
+
+
+### Bug Fixes
+
+* add clientMode dht arg and upgrade interface-datastore ([#918](https://github.com/libp2p/js-libp2p/issues/918)) ([975e779](https://github.com/libp2p/js-libp2p/commit/975e77991e67dd9bff790b83df7bd6fa5ddcfc67))
+* do not add abort signals to useless addresses ([#913](https://github.com/libp2p/js-libp2p/issues/913)) ([06e8f3d](https://github.com/libp2p/js-libp2p/commit/06e8f3dd42432e4b37ab7904b02abde7d1cadda3))
+* specify pbjs root ([#917](https://github.com/libp2p/js-libp2p/issues/917)) ([b043bca](https://github.com/libp2p/js-libp2p/commit/b043bca607565cf534771e6cf975288a8ff3030b))
+
+
+
+# [0.31.0-rc.3](https://github.com/libp2p/js-libp2p/compare/v0.31.0-rc.2...v0.31.0-rc.3) (2021-04-19)
+
+
+### Bug Fixes
+
+* remove inline arg types from function definitions ([#916](https://github.com/libp2p/js-libp2p/issues/916)) ([2af692f](https://github.com/libp2p/js-libp2p/commit/2af692fb4de572168524ae684608fc6526de4ef7))
+
+
+
+# [0.31.0-rc.2](https://github.com/libp2p/js-libp2p/compare/v0.31.0-rc.1...v0.31.0-rc.2) (2021-04-16)
+
+
+### Bug Fixes
+
+* metrics stats and moving averages types ([#915](https://github.com/libp2p/js-libp2p/issues/915)) ([3d0a79e](https://github.com/libp2p/js-libp2p/commit/3d0a79eff3bc34a5bdc8ffa31e9b09345a02ad9d))
+
+
+
+# [0.31.0-rc.1](https://github.com/libp2p/js-libp2p/compare/v0.31.0-rc.0...v0.31.0-rc.1) (2021-04-16)
+
+
+### Bug Fixes
+
+* dial protocol should throw if no protocol is provided ([#914](https://github.com/libp2p/js-libp2p/issues/914)) ([21c9aee](https://github.com/libp2p/js-libp2p/commit/21c9aeecb13440238aa6b0fb5a6731d2f87d4938))
+
+
+### BREAKING CHANGES
+
+* dialProtocol does not return connection when no protocols are provided
+
+
+
+# [0.31.0-rc.0](https://github.com/libp2p/js-libp2p/compare/v0.30.12...v0.31.0-rc.0) (2021-04-15)
+
+
+
+## [0.30.12](https://github.com/libp2p/js-libp2p/compare/v0.30.11...v0.30.12) (2021-03-27)
+
+
+### Bug Fixes
+
+* the API of es6-promisify is not the same as promisify-es6 ([#905](https://github.com/libp2p/js-libp2p/issues/905)) ([a7128f0](https://github.com/libp2p/js-libp2p/commit/a7128f07ec8d4b729145ecfc6ad1d585ffddea46))
+
+
+
+## [0.30.11](https://github.com/libp2p/js-libp2p/compare/v0.30.10...v0.30.11) (2021-03-23)
+
+
+### Bug Fixes
+
+* connection direction should be only inbound or outbound ([9504f19](https://github.com/libp2p/js-libp2p/commit/9504f1951a3cca55bb7b4e25e4934e4024034ee8))
+* interface-datastore update ([f5c1cd1](https://github.com/libp2p/js-libp2p/commit/f5c1cd1fb07bc73cf9d9da3c2eb4327bed4279a4))
+
+
+
+## [0.30.10](https://github.com/libp2p/js-libp2p/compare/v0.30.9...v0.30.10) (2021-03-09)
+
+
+### Bug Fixes
+
+* conn mgr access to moving averages record object ([#897](https://github.com/libp2p/js-libp2p/issues/897)) ([5f702f3](https://github.com/libp2p/js-libp2p/commit/5f702f3481afd4ad4fbc89f0e9b75a6d56b03520))
+
+
+
+## [0.30.9](https://github.com/libp2p/js-libp2p/compare/v0.30.8...v0.30.9) (2021-02-25)
+
+
+### Bug Fixes
+
+* transport manager fault tolerance should include tolerance to transport listen fail ([#893](https://github.com/libp2p/js-libp2p/issues/893)) ([3f314d5](https://github.com/libp2p/js-libp2p/commit/3f314d5e90f74583b721386d0c9c5d8363cd4de7))
+
+
+
+## [0.30.8](https://github.com/libp2p/js-libp2p/compare/v0.30.7...v0.30.8) (2021-02-11)
+
+
+### Bug Fixes
+
+* routers should only use dht if enabled ([#885](https://github.com/libp2p/js-libp2p/issues/885)) ([a34d2bb](https://github.com/libp2p/js-libp2p/commit/a34d2bbcc3d69ec3006137a909a7e8c53b9d378e))
+
+
+
+## [0.30.7](https://github.com/libp2p/js-libp2p/compare/v0.30.6...v0.30.7) (2021-02-01)
+
+
+### Bug Fixes
+
+* do not add observed address received from peers ([#882](https://github.com/libp2p/js-libp2p/issues/882)) ([a36b211](https://github.com/libp2p/js-libp2p/commit/a36b2112aafcee309a02de0cff5440cf69cd53a7))
+
+
+
+## [0.30.6](https://github.com/libp2p/js-libp2p/compare/v0.30.5...v0.30.6) (2021-01-29)
+
+
+### Bug Fixes
+
+* peer discovery type in config ([#878](https://github.com/libp2p/js-libp2p/issues/878)) ([3e7594f](https://github.com/libp2p/js-libp2p/commit/3e7594f69733bf374b374a6065458fa6cae81c5f))
+* unref nat manager retries ([#877](https://github.com/libp2p/js-libp2p/issues/877)) ([ce2a624](https://github.com/libp2p/js-libp2p/commit/ce2a624a09b3107c0b2b4752e666804ecea54fb5))
+
+
+
+## [0.30.5](https://github.com/libp2p/js-libp2p/compare/v0.30.4...v0.30.5) (2021-01-28)
+
+
+### Bug Fixes
+
+* create has optional peer id type ([#875](https://github.com/libp2p/js-libp2p/issues/875)) ([eeda056](https://github.com/libp2p/js-libp2p/commit/eeda05688330c17b810bf47544ef977386623317))
+
+
+
+## [0.30.4](https://github.com/libp2p/js-libp2p/compare/v0.30.3...v0.30.4) (2021-01-27)
+
+
+### Features
+
+* add UPnP NAT manager ([#810](https://github.com/libp2p/js-libp2p/issues/810)) ([0a6bc0d](https://github.com/libp2p/js-libp2p/commit/0a6bc0d1013dfd80ab600e8f74c1544b433ece29))
+
+
+
+## [0.30.3](https://github.com/libp2p/js-libp2p/compare/v0.30.2...v0.30.3) (2021-01-27)
+
+
+
+## [0.30.2](https://github.com/libp2p/js-libp2p/compare/v0.30.1...v0.30.2) (2021-01-21)
+
+
+### Bug Fixes
+
+* store multiaddrs during content and peer routing queries ([#865](https://github.com/libp2p/js-libp2p/issues/865)) ([45c3367](https://github.com/libp2p/js-libp2p/commit/45c33675a7412c66d0fd4e113ef8506077b6f492))
+
+
+
+## [0.30.1](https://github.com/libp2p/js-libp2p/compare/v0.30.0...v0.30.1) (2021-01-18)
+
+
+### Bug Fixes
+
+* event emitter types with local types ([#864](https://github.com/libp2p/js-libp2p/issues/864)) ([6c41e30](https://github.com/libp2p/js-libp2p/commit/6c41e3045608bcae8061d20501be5751dad8157a))
+
+
+
+# [0.30.0](https://github.com/libp2p/js-libp2p/compare/v0.29.4...v0.30.0) (2020-12-16)
+
+
+### Bug Fixes
+
+* remove test/dialing/utils extra file ([689c35e](https://github.com/libp2p/js-libp2p/commit/689c35ed1c68e514293a9895d496e2e8440454e9))
+* types from ipfs integration ([#832](https://github.com/libp2p/js-libp2p/issues/832)) ([9ae1b75](https://github.com/libp2p/js-libp2p/commit/9ae1b758e99e3fc9067e26b4eae4c15ccb1ba303))
+
+
+### chore
+
+* update pubsub ([#801](https://github.com/libp2p/js-libp2p/issues/801)) ([e50c6ab](https://github.com/libp2p/js-libp2p/commit/e50c6abcf2ebc80ebf2dfadd015ab21a20cffadc))
+
+
+### Features
+
+* auto relay ([#723](https://github.com/libp2p/js-libp2p/issues/723)) ([caf66ea](https://github.com/libp2p/js-libp2p/commit/caf66ea1439f6b75a0c321a16bd5c5d7d6a2bd47))
+* auto relay network query for new relays ([0bf0b7c](https://github.com/libp2p/js-libp2p/commit/0bf0b7cf8968d55002ac4c559ffb59985feeb092))
+* custom announce filter ([ef9d3ca](https://github.com/libp2p/js-libp2p/commit/ef9d3ca2c6f35d692d6079e74088c5146d46eebe))
+* custom dialer addr sorter ([#792](https://github.com/libp2p/js-libp2p/issues/792)) ([585ad52](https://github.com/libp2p/js-libp2p/commit/585ad52b4c71dd7514e99a287e0318b2b837ec48))
+* discover and connect to closest peers ([#798](https://github.com/libp2p/js-libp2p/issues/798)) ([baedf3f](https://github.com/libp2p/js-libp2p/commit/baedf3fe5ab946e938db1415d1662452cdfc0cc1))
+
+
+### BREAKING CHANGES
+
+* pubsub signing policy properties were changed according to libp2p-interfaces changes to a single property. The emitSelf option default value was also modified to match the routers value
+
+
+
+# [0.30.0-rc.2](https://github.com/libp2p/js-libp2p/compare/v0.30.0-rc.1...v0.30.0-rc.2) (2020-12-15)
+
+
+
+# [0.30.0-rc.1](https://github.com/libp2p/js-libp2p/compare/v0.30.0-rc.0...v0.30.0-rc.1) (2020-12-11)
+
+
+### Bug Fixes
+
+* types from ipfs integration ([#832](https://github.com/libp2p/js-libp2p/issues/832)) ([216eb97](https://github.com/libp2p/js-libp2p/commit/216eb9730ef473f73a974c3dbaf306ecdc815c8b))
+
+
+
+# [0.30.0-rc.0](https://github.com/libp2p/js-libp2p/compare/v0.29.4...v0.30.0-rc.0) (2020-12-10)
+
+
+### Bug Fixes
+
+* remove test/dialing/utils extra file ([3f1dc20](https://github.com/libp2p/js-libp2p/commit/3f1dc20caf1c80078f403deb9174cd06d08567ab))
+
+
+### chore
+
+* update pubsub ([#801](https://github.com/libp2p/js-libp2p/issues/801)) ([9205fce](https://github.com/libp2p/js-libp2p/commit/9205fce34d0cd8dd5d32988be34c110fc0a5b6e2))
+
+
+### Features
+
+* auto relay ([#723](https://github.com/libp2p/js-libp2p/issues/723)) ([65ec267](https://github.com/libp2p/js-libp2p/commit/65ec267e7f4826caacd042213c3fbacce589ab5b))
+* auto relay network query for new relays ([9faf1bf](https://github.com/libp2p/js-libp2p/commit/9faf1bfcf61581acc715b9be78b71dc14501835a))
+* custom announce filter ([48476d5](https://github.com/libp2p/js-libp2p/commit/48476d504a98b7b51b3e2dc64eab93670fde0c7b))
+* custom dialer addr sorter ([#792](https://github.com/libp2p/js-libp2p/issues/792)) ([91b15b6](https://github.com/libp2p/js-libp2p/commit/91b15b6790952b4db11264961d9c6f2a96d1fe43))
+* discover and connect to closest peers ([#798](https://github.com/libp2p/js-libp2p/issues/798)) ([b73106e](https://github.com/libp2p/js-libp2p/commit/b73106eba2d559621f427f7aa788e9b0ef47d135))
+
+
+### BREAKING CHANGES
+
+* pubsub signing policy properties were changed according to libp2p-interfaces changes to a single property. The emitSelf option default value was also modified to match the routers value
+
+
+
+<a name="0.29.4"></a>
+## [0.29.4](https://github.com/libp2p/js-libp2p/compare/v0.29.3...v0.29.4) (2020-12-09)
+
+
+### Bug Fixes
+
+* dial self ([#826](https://github.com/libp2p/js-libp2p/issues/826)) ([6350a18](https://github.com/libp2p/js-libp2p/commit/6350a18))
+
+
+### Features
+
+* custom and store self agent version + store self protocol version ([#800](https://github.com/libp2p/js-libp2p/issues/800)) ([d0a9fad](https://github.com/libp2p/js-libp2p/commit/d0a9fad))
+* support custom listener options ([#822](https://github.com/libp2p/js-libp2p/issues/822)) ([8691465](https://github.com/libp2p/js-libp2p/commit/8691465))
+
+
+
+<a name="0.29.3"></a>
+## [0.29.3](https://github.com/libp2p/js-libp2p/compare/v0.29.2...v0.29.3) (2020-11-04)
+
+
+### Features
+
+* resolve multiaddrs before dial ([#782](https://github.com/libp2p/js-libp2p/issues/782)) ([093c0ea](https://github.com/libp2p/js-libp2p/commit/093c0ea))
+
+
+
+<a name="0.29.2"></a>
+## [0.29.2](https://github.com/libp2p/js-libp2p/compare/v0.29.1...v0.29.2) (2020-10-23)
+
+
+### Bug Fixes
+
+* cleanup open streams on conn close ([#791](https://github.com/libp2p/js-libp2p/issues/791)) ([06f26e5](https://github.com/libp2p/js-libp2p/commit/06f26e5))
+
+
+
+<a name="0.29.1"></a>
+## [0.29.1](https://github.com/libp2p/js-libp2p/compare/v0.29.0...v0.29.1) (2020-10-22)
+
+
+### Bug Fixes
+
+* catch error in upgrader close call ([e04224a](https://github.com/libp2p/js-libp2p/commit/e04224a))
+* ensure streams are closed on connection close ([4c6be91](https://github.com/libp2p/js-libp2p/commit/4c6be91))
+* flakey identify test firefox ([#774](https://github.com/libp2p/js-libp2p/issues/774)) ([60d437f](https://github.com/libp2p/js-libp2p/commit/60d437f))
+
+
+
 <a name="0.29.0"></a>
 # [0.29.0](https://github.com/libp2p/js-libp2p/compare/v0.28.10...v0.29.0) (2020-08-27)
 
@@ -1175,6 +1829,3 @@ for subscribe to see how it should be used.
 
 <a name="0.5.5"></a>
 ## [0.5.5](https://github.com/libp2p/js-libp2p/compare/v0.5.4...v0.5.5) (2017-03-21)
-
-
-

LICENSE

@@ -1,22 +1,4 @@
-The MIT License (MIT)
-
-Copyright (c) 2015 David Dias
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
+This project is dual licensed under MIT and Apache-2.0.
 
+MIT: https://www.opensource.org/licenses/mit
+Apache-2.0: https://www.apache.org/licenses/license-2.0

LICENSE-APACHE

@@ -0,0 +1,5 @@
+Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at
+
+http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

LICENSE-MIT

@@ -0,0 +1,19 @@
+The MIT License (MIT)
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.

README.md

@@ -16,15 +16,15 @@
 </p>
 
 <p align="center">
-  <a href="https://travis-ci.com/libp2p/js-libp2p"><img src="https://flat.badgen.net/travis/libp2p/js-libp2p" /></a>
-  <a href="https://codecov.io/gh/libp2p/js-libp2p"><img src="https://img.shields.io/codecov/c/github/ipfs/js-ipfs-multipart/master.svg?style=flat-square"></a>
+  <a href="https://github.com/libp2p/js-libp2p/actions?query=branch%3Amaster+workflow%3Aci+"><img src="https://img.shields.io/github/workflow/status/libp2p/js-libp2p/ci?label=ci&style=flat-square" /></a>
+  <a href="https://codecov.io/gh/libp2p/js-libp2p"><img src="https://img.shields.io/codecov/c/github/libp2p/js-libp2p/master.svg?style=flat-square"></a>
   <a href="https://bundlephobia.com/result?p=ipfsd-ctl"><img src="https://flat.badgen.net/bundlephobia/minzip/ipfsd-ctl"></a>
   <br>
   <a href="https://david-dm.org/libp2p/js-libp2p"><img src="https://david-dm.org/libp2p/js-libp2p.svg?style=flat-square" /></a>
   <a href="https://github.com/feross/standard"><img src="https://img.shields.io/badge/code%20style-standard-brightgreen.svg?style=flat-square"></a>
   <a href="https://github.com/RichardLitt/standard-readme"><img src="https://img.shields.io/badge/standard--readme-OK-green.svg?style=flat-square" /></a>
-  <a href=""><img src="https://img.shields.io/badge/npm-%3E%3D6.0.0-orange.svg?style=flat-square" /></a>
-  <a href=""><img src="https://img.shields.io/badge/Node.js-%3E%3D10.0.0-orange.svg?style=flat-square" /></a>
+  <a href=""><img src="https://img.shields.io/badge/npm-%3E%3D7.0.0-orange.svg?style=flat-square" /></a>
+  <a href=""><img src="https://img.shields.io/badge/Node.js-%3E%3D15.0.0-orange.svg?style=flat-square" /></a>
   <br>
 </p>
 
@@ -39,26 +39,22 @@ If you are looking for the documentation of the latest release, you can view the
 
 **Want to update libp2p in your project?** Check our [migrations folder](./doc/migrations).
 
-[**`Weekly Core Dev Calls`**](https://github.com/libp2p/team-mgmt/issues/16)
-
-## Lead Maintainer
-
-[Jacob Heun](https://github.com/jacobheun/)
-
-## Table of Contents
+## Table of Contents <!-- omit in toc -->
 
 - [Background](#background)
 - [Install](#install)
 - [Usage](#usage)
   - [Configuration](#configuration)
   - [API](#api)
-  - [Getting Started](#getting-started)
+  - [Getting started](#getting-started)
   - [Tutorials and Examples](#tutorials-and-examples)
 - [Development](#development)
   - [Tests](#tests)
+    - [Run unit tests](#run-unit-tests)
   - [Packages](#packages)
 - [Contribute](#contribute)
 - [License](#license)
+  - [Contribution](#contribution)
 
 ## Background
 
@@ -123,7 +119,7 @@ You can find multiple examples on the [examples folder](./examples) that will gu
 > npm run test:node
 
 # run just Browser tests (Chrome)
-> npm run test:browser
+> npm run test:chrome
 ```
 
 ### Packages
@@ -147,7 +143,6 @@ List of packages currently in existence for libp2p
 | [`libp2p-websockets`](//github.com/libp2p/js-libp2p-websockets) | [![npm](https://img.shields.io/npm/v/libp2p-websockets.svg?maxAge=86400&style=flat-square)](//github.com/libp2p/js-libp2p-websockets/releases) | [![Deps](https://david-dm.org/libp2p/js-libp2p-websockets.svg?style=flat-square)](https://david-dm.org/libp2p/js-libp2p-websockets) | [![Travis CI](https://flat.badgen.net/travis/libp2p/js-libp2p-websockets/master)](https://travis-ci.com/libp2p/js-libp2p-websockets) | [![codecov](https://codecov.io/gh/libp2p/js-libp2p-websockets/branch/master/graph/badge.svg?style=flat-square)](https://codecov.io/gh/libp2p/js-libp2p-websockets) | [Jacob Heun](mailto:jacobheun@gmail.com) |
 | **secure channels** |
 | [`libp2p-noise`](//github.com/NodeFactoryIo/js-libp2p-noise) | [![npm](https://img.shields.io/npm/v/libp2p-noise.svg?maxAge=86400&style=flat-square)](//github.com/NodeFactoryIo/js-libp2p-noise/releases) | [![Deps](https://david-dm.org/NodeFactoryIo/js-libp2p-noise.svg?style=flat-square)](https://david-dm.org/NodeFactoryIo/js-libp2p-noise) | [![Travis CI](https://flat.badgen.net/travis/NodeFactoryIo/js-libp2p-noise/master)](https://travis-ci.com/NodeFactoryIo/js-libp2p-noise) | [![codecov](https://codecov.io/gh/NodeFactoryIo/js-libp2p-noise/branch/master/graph/badge.svg?style=flat-square)](https://codecov.io/gh/NodeFactoryIo/js-libp2p-noise) | N/A |
-| [`libp2p-secio`](//github.com/libp2p/js-libp2p-secio) | [![npm](https://img.shields.io/npm/v/libp2p-secio.svg?maxAge=86400&style=flat-square)](//github.com/libp2p/js-libp2p-secio/releases) | [![Deps](https://david-dm.org/libp2p/js-libp2p-secio.svg?style=flat-square)](https://david-dm.org/libp2p/js-libp2p-secio) | [![Travis CI](https://flat.badgen.net/travis/libp2p/js-libp2p-secio/master)](https://travis-ci.com/libp2p/js-libp2p-secio) | [![codecov](https://codecov.io/gh/libp2p/js-libp2p-secio/branch/master/graph/badge.svg?style=flat-square)](https://codecov.io/gh/libp2p/js-libp2p-secio) | [Friedel Ziegelmayer](mailto:dignifiedquire@gmail.com) |
 | **stream multiplexers** |
 | [`libp2p-mplex`](//github.com/libp2p/js-libp2p-mplex) | [![npm](https://img.shields.io/npm/v/libp2p-mplex.svg?maxAge=86400&style=flat-square)](//github.com/libp2p/js-libp2p-mplex/releases) | [![Deps](https://david-dm.org/libp2p/js-libp2p-mplex.svg?style=flat-square)](https://david-dm.org/libp2p/js-libp2p-mplex) | [![Travis CI](https://flat.badgen.net/travis/libp2p/js-libp2p-mplex/master)](https://travis-ci.com/libp2p/js-libp2p-mplex) | [![codecov](https://codecov.io/gh/libp2p/js-libp2p-mplex/branch/master/graph/badge.svg?style=flat-square)](https://codecov.io/gh/libp2p/js-libp2p-mplex) | [Vasco Santos](mailto:vasco.santos@moxy.studio) |
 | **peer discovery** |
@@ -164,9 +159,9 @@ List of packages currently in existence for libp2p
 | [`libp2p-kad-dht`](//github.com/libp2p/js-libp2p-kad-dht) | [![npm](https://img.shields.io/npm/v/libp2p-kad-dht.svg?maxAge=86400&style=flat-square)](//github.com/libp2p/js-libp2p-kad-dht/releases) | [![Deps](https://david-dm.org/libp2p/js-libp2p-kad-dht.svg?style=flat-square)](https://david-dm.org/libp2p/js-libp2p-kad-dht) | [![Travis CI](https://flat.badgen.net/travis/libp2p/js-libp2p-kad-dht/master)](https://travis-ci.com/libp2p/js-libp2p-kad-dht) | [![codecov](https://codecov.io/gh/libp2p/js-libp2p-kad-dht/branch/master/graph/badge.svg?style=flat-square)](https://codecov.io/gh/libp2p/js-libp2p-kad-dht) | [Vasco Santos](mailto:vasco.santos@moxy.studio) |
 | **utilities** |
 | [`libp2p-crypto`](//github.com/libp2p/js-libp2p-crypto) | [![npm](https://img.shields.io/npm/v/libp2p-crypto.svg?maxAge=86400&style=flat-square)](//github.com/libp2p/js-libp2p-crypto/releases) | [![Deps](https://david-dm.org/libp2p/js-libp2p-crypto.svg?style=flat-square)](https://david-dm.org/libp2p/js-libp2p-crypto) | [![Travis CI](https://flat.badgen.net/travis/libp2p/js-libp2p-crypto/master)](https://travis-ci.com/libp2p/js-libp2p-crypto) | [![codecov](https://codecov.io/gh/libp2p/js-libp2p-crypto/branch/master/graph/badge.svg?style=flat-square)](https://codecov.io/gh/libp2p/js-libp2p-crypto) | [Jacob Heun](mailto:jacobheun@gmail.com) |
-| [`libp2p-crypto-secp256k1`](//github.com/libp2p/js-libp2p-crypto-secp256k1) | [![npm](https://img.shields.io/npm/v/libp2p-crypto-secp256k1.svg?maxAge=86400&style=flat-square)](//github.com/libp2p/js-libp2p-crypto-secp256k1/releases) | [![Deps](https://david-dm.org/libp2p/js-libp2p-crypto-secp256k1.svg?style=flat-square)](https://david-dm.org/libp2p/js-libp2p-crypto-secp256k1) | [![Travis CI](https://flat.badgen.net/travis/libp2p/js-libp2p-crypto-secp256k1/master)](https://travis-ci.com/libp2p/js-libp2p-crypto-secp256k1) | [![codecov](https://codecov.io/gh/libp2p/js-libp2p-crypto-secp256k1/branch/master/graph/badge.svg?style=flat-square)](https://codecov.io/gh/libp2p/js-libp2p-crypto-secp256k1) | [Friedel Ziegelmayer](mailto:dignifiedquire@gmail.com) |
 | **data types** |
 | [`peer-id`](//github.com/libp2p/js-peer-id) | [![npm](https://img.shields.io/npm/v/peer-id.svg?maxAge=86400&style=flat-square)](//github.com/libp2p/js-peer-id/releases) | [![Deps](https://david-dm.org/libp2p/js-peer-id.svg?style=flat-square)](https://david-dm.org/libp2p/js-peer-id) | [![Travis CI](https://flat.badgen.net/travis/libp2p/js-peer-id/master)](https://travis-ci.com/libp2p/js-peer-id) | [![codecov](https://codecov.io/gh/libp2p/js-peer-id/branch/master/graph/badge.svg?style=flat-square)](https://codecov.io/gh/libp2p/js-peer-id) | [Vasco Santos](mailto:santos.vasco10@gmail.com) |
+| [`libp2p-record`](//github.com/libp2p/js-libp2p-record) | [![npm](https://img.shields.io/npm/v/libp2p-record.svg?maxAge=86400&style=flat-square)](//github.com/libp2p/js-libp2p-record/releases) | [![Deps](https://david-dm.org/libp2p/js-libp2p-record.svg?style=flat-square)](https://david-dm.org/libp2p/js-libp2p-record) | [![Travis CI](https://flat.badgen.net/travis/libp2p/js-libp2p-record/master)](https://travis-ci.com/libp2p/js-libp2p-record) | [![codecov](https://codecov.io/gh/libp2p/js-libp2p-record/branch/master/graph/badge.svg?style=flat-square)](https://codecov.io/gh/libp2p/js-libp2p-record) | [Jacob Heun](mailto:santos.vasco10@gmail.com) |
 | **pubsub** |
 | [`libp2p-floodsub`](//github.com/libp2p/js-libp2p-floodsub) | [![npm](https://img.shields.io/npm/v/libp2p-floodsub.svg?maxAge=86400&style=flat-square)](//github.com/libp2p/js-libp2p-floodsub/releases) | [![Deps](https://david-dm.org/libp2p/js-libp2p-floodsub.svg?style=flat-square)](https://david-dm.org/libp2p/js-libp2p-floodsub) | [![Travis CI](https://flat.badgen.net/travis/libp2p/js-libp2p-floodsub/master)](https://travis-ci.com/libp2p/js-libp2p-floodsub) | [![codecov](https://codecov.io/gh/libp2p/js-libp2p-floodsub/branch/master/graph/badge.svg?style=flat-square)](https://codecov.io/gh/libp2p/js-libp2p-floodsub) | [Vasco Santos](mailto:vasco.santos@moxy.studio) |
 | [`libp2p-gossipsub`](//github.com/ChainSafe/js-libp2p-gossipsub) | [![npm](https://img.shields.io/npm/v/libp2p-gossipsub.svg?maxAge=86400&style=flat-square)](//github.com/ChainSafe/js-libp2p-gossipsub/releases) | [![Deps](https://david-dm.org/ChainSafe/js-libp2p-gossipsub.svg?style=flat-square)](https://david-dm.org/ChainSafe/js-libp2p-gossipsub) | [![Travis CI](https://flat.badgen.net/travis/ChainSafe/js-libp2p-gossipsub/master)](https://travis-ci.com/ChainSafe/js-libp2p-gossipsub) | [![codecov](https://codecov.io/gh/ChainSafe/js-libp2p-gossipsub/branch/master/graph/badge.svg?style=flat-square)](https://codecov.io/gh/ChainSafe/js-libp2p-gossipsub) | [Cayman Nava](mailto:caymannava@gmail.com) |
@@ -184,4 +179,11 @@ The libp2p implementation in JavaScript is a work in progress. As such, there ar
 
 ## License
 
-[MIT](LICENSE) © Protocol Labs
+Licensed under either of
+
+ * Apache 2.0, ([LICENSE-APACHE](LICENSE-APACHE) / http://www.apache.org/licenses/LICENSE-2.0)
+ * MIT ([LICENSE-MIT](LICENSE-MIT) / http://opensource.org/licenses/MIT)
+
+### Contribution
+
+Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in the work by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.

doc/API.md

@@ -3,6 +3,7 @@
 * [Static Functions](#static-functions)
   * [`create`](#create)
 * [Instance Methods](#libp2p-instance-methods)
+  * [`loadkeychain`](#loadkeychain)
   * [`start`](#start)
   * [`stop`](#stop)
   * [`dial`](#dial)
@@ -11,16 +12,19 @@
   * [`handle`](#handle)
   * [`unhandle`](#unhandle)
   * [`ping`](#ping)
+  * [`fetch`](#fetch)
+  * [`fetchService.registerLookupFunction`](#fetchserviceregisterlookupfunction)
+  * [`fetchService.unRegisterLookupFunction`](#fetchserviceunregisterlookupfunction)
   * [`multiaddrs`](#multiaddrs)
   * [`addressManager.getListenAddrs`](#addressmanagergetlistenaddrs)
-  * [`addressmger.getAnnounceAddrs`](#addressmanagergetannounceaddrs)
-  * [`addressManager.getNoAnnounceAddrs`](#addressmanagergetnoannounceaddrs)
+  * [`addressManager.getAnnounceAddrs`](#addressmanagergetannounceaddrs)
   * [`contentRouting.findProviders`](#contentroutingfindproviders)
   * [`contentRouting.provide`](#contentroutingprovide)
   * [`contentRouting.put`](#contentroutingput)
   * [`contentRouting.get`](#contentroutingget)
   * [`contentRouting.getMany`](#contentroutinggetmany)
   * [`peerRouting.findPeer`](#peerroutingfindpeer)
+  * [`peerRouting.getClosestPeers`](#peerroutinggetclosestpeers)
   * [`peerStore.addressBook.add`](#peerstoreaddressbookadd)
   * [`peerStore.addressBook.delete`](#peerstoreaddressbookdelete)
   * [`peerStore.addressBook.get`](#peerstoreaddressbookget)
@@ -37,6 +41,7 @@
   * [`peerStore.protoBook.add`](#peerstoreprotobookadd)
   * [`peerStore.protoBook.delete`](#peerstoreprotobookdelete)
   * [`peerStore.protoBook.get`](#peerstoreprotobookget)
+  * [`peerStore.protoBook.remove`](#peerstoreprotobookremove)
   * [`peerStore.protoBook.set`](#peerstoreprotobookset)
   * [`peerStore.delete`](#peerstoredelete)
   * [`peerStore.get`](#peerstoreget)
@@ -48,6 +53,8 @@
   * [`pubsub.unsubscribe`](#pubsubunsubscribe)
   * [`pubsub.on`](#pubsubon)
   * [`pubsub.removeListener`](#pubsubremovelistener)
+  * [`pubsub.topicValidators.set`](#pubsubtopicvalidatorsset)
+  * [`pubsub.topicValidators.delete`](#pubsubtopicvalidatorsdelete)
   * [`connectionManager.get`](#connectionmanagerget)
   * [`connectionManager.setPeerValue`](#connectionmanagersetpeervalue)
   * [`connectionManager.size`](#connectionmanagersize)
@@ -88,8 +95,9 @@ Creates an instance of Libp2p.
 |------|------|-------------|
 | options | `object` | libp2p options |
 | options.modules | [`Array<object>`](./CONFIGURATION.md#modules) | libp2p [modules](./CONFIGURATION.md#modules) to use |
-| [options.addresses] | `{ listen: Array<string>, announce: Array<string>, noAnnounce: Array<string> }` | Addresses for transport listening and to advertise to the network |
+| [options.addresses] | `{ listen: Array<string>, announce: Array<string>, announceFilter: (ma: Array<multiaddr>) => Array<multiaddr> }` | Addresses for transport listening and to advertise to the network |
 | [options.config] | `object` | libp2p modules configuration and core configuration |
+| [options.host] | `{ agentVersion: string }` | libp2p host options |
 | [options.connectionManager] | [`object`](./CONFIGURATION.md#configuring-connection-manager) | libp2p Connection Manager [configuration](./CONFIGURATION.md#configuring-connection-manager) |
 | [options.transportManager] | [`object`](./CONFIGURATION.md#configuring-transport-manager) | libp2p transport manager [configuration](./CONFIGURATION.md#configuring-transport-manager) |
 | [options.datastore] | `object` | must implement [ipfs/interface-datastore](https://github.com/ipfs/interface-datastore) (in memory datastore will be used if not provided) |
@@ -97,6 +105,7 @@ Creates an instance of Libp2p.
 | [options.keychain] | [`object`](./CONFIGURATION.md#setup-with-keychain) | keychain [configuration](./CONFIGURATION.md#setup-with-keychain) |
 | [options.metrics] | [`object`](./CONFIGURATION.md#configuring-metrics) | libp2p Metrics [configuration](./CONFIGURATION.md#configuring-metrics) |
 | [options.peerId] | [`PeerId`][peer-id] | peerId instance (it will be created if not provided) |
+| [options.peerRouting] | [`object`](./CONFIGURATION.md#setup-with-content-and-peer-routing) | libp2p Peer routing service [configuration](./CONFIGURATION.md#setup-with-content-and-peer-routing) |
 | [options.peerStore] | [`object`](./CONFIGURATION.md#configuring-peerstore) | libp2p PeerStore [configuration](./CONFIGURATION.md#configuring-peerstore) |
 
 For Libp2p configurations and modules details read the [Configuration Document](./CONFIGURATION.md).
@@ -110,13 +119,24 @@ For Libp2p configurations and modules details read the [Configuration Document](
 #### Example
 
 ```js
-const Libp2p = require('libp2p')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
 
-// specify options
-const options = {}
+async function main () {
+  // specify options
+  const options = {
+    transports: [new TCP()],
+    streamMuxers: [new Mplex()],
+    connectionEncryption: [new Noise()]
+  }
 
-// create libp2p
-const libp2p = await Libp2p.create(options)
+  // create libp2p
+  const libp2p = await createLibp2p(options)
+}
+
+main()
 ```
 
 Note: The [`PeerId`][peer-id] option is not required and will be generated if it is not provided.
@@ -127,13 +147,29 @@ As an alternative, it is possible to create a Libp2p instance with the construct
 #### Example
 
 ```js
-const Libp2p = require('libp2p')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
 
-// specify options
-const options = {}
 
-// create libp2p
-const libp2p = new Libp2p(options)
+async function main () {
+  const peerId = await PeerId.create();
+
+  // specify options
+  // peerId is required when Libp2p is instantiated via the constructor
+  const options = {
+    peerId,
+    transports: [new TCP()],
+    streamMuxers: [new Mplex()],
+    connectionEncryption: [new Noise()]
+  }
+
+  // create libp2p
+  const libp2p = new Libp2p(options)
+}
+
+main()
 ```
 
 Required keys in the `options` object:
@@ -160,11 +196,11 @@ Load keychain keys from the datastore, importing the private key as 'self', if n
 #### Example
 
 ```js
-const Libp2p = require('libp2p')
+import { createLibp2p } from 'libp2p'
 
 // ...
 
-const libp2p = await Libp2p.create({
+const libp2p = await createLibp2p({
   // ...
   keychain: {
     pass: '0123456789pass1234567890'
@@ -190,11 +226,11 @@ Starts the libp2p node.
 #### Example
 
 ```js
-const Libp2p = require('libp2p')
+import { createLibp2p } from 'libp2p'
 
 // ...
 
-const libp2p = await Libp2p.create(options)
+const libp2p = await createLibp2p(options)
 
 // start libp2p
 await libp2p.start()
@@ -215,10 +251,10 @@ Stops the libp2p node.
 #### Example
 
 ```js
-const Libp2p = require('libp2p')
+import { createLibp2p } from 'libp2p'
 
 // ...
-const libp2p = await Libp2p.create(options)
+const libp2p = await createLibp2p(options)
 // ...
 
 // stop libp2p
@@ -314,7 +350,7 @@ Dials to another peer in the network and selects a protocol to communicate with
 
 ```js
 // ...
-const pipe = require('it-pipe')
+import { pipe } from 'it-pipe'
 
 const { stream, protocol } = await libp2p.dialProtocol(remotePeerId, protocols)
 
@@ -418,6 +454,72 @@ Pings a given peer and get the operation's latency.
 const latency = await libp2p.ping(otherPeerId)
 ```
 
+## fetch
+
+Fetch a value from a remote node
+
+`libp2p.fetch(peer, key)`
+
+#### Parameters
+
+| Name | Type | Description |
+|------|------|-------------|
+| peer | [`PeerId`][peer-id]\|[`Multiaddr`][multiaddr]\|`string` | peer to ping |
+| key | `string` | A key that corresponds to a value on the remote node |
+
+#### Returns
+
+| Type | Description |
+|------|-------------|
+| `Promise<Uint8Array | null>` | The value for the key or null if it cannot be found |
+
+#### Example
+
+```js
+// ...
+const value = await libp2p.fetch(otherPeerId, '/some/key')
+```
+
+## fetchService.registerLookupFunction
+
+Register a function to look up values requested by remote nodes
+
+`libp2p.fetchService.registerLookupFunction(prefix, lookup)`
+
+#### Parameters
+
+| Name | Type | Description |
+|------|------|-------------|
+| prefix | `string` | All queries below this prefix will be passed to the lookup function |
+| lookup | `(key: string) => Promise<Uint8Array | null>` | A function that takes a key and returns a Uint8Array or null |
+
+#### Example
+
+```js
+// ...
+const value = await libp2p.fetchService.registerLookupFunction('/prefix', (key) => { ... })
+```
+
+## fetchService.unregisterLookupFunction
+
+Removes the passed lookup function or any function registered for the passed prefix
+
+`libp2p.fetchService.unregisterLookupFunction(prefix, lookup)`
+
+#### Parameters
+
+| Name | Type | Description |
+|------|------|-------------|
+| prefix | `string` | All queries below this prefix will be passed to the lookup function |
+| lookup | `(key: string) => Promise<Uint8Array | null>` | Optional: A function that takes a key and returns a Uint8Array or null |
+
+#### Example
+
+```js
+// ...
+libp2p.fetchService.unregisterLookupFunction('/prefix')
+```
+
 ## multiaddrs
 
 Gets the multiaddrs the libp2p node announces to the network. This computes the advertising multiaddrs
@@ -480,26 +582,6 @@ const announceMa = libp2p.addressManager.getAnnounceAddrs()
 // [ <Multiaddr 047f00000106f9ba - /dns4/peer.io/...> ]
 ```
 
-### addressManager.getNoAnnounceAddrs
-
-Get the multiaddrs that were provided to not announce to the network.
-
-`libp2p.addressManager.getNoAnnounceAddrs()`
-
-#### Returns
-
-| Type | Description |
-|------|-------------|
-| `Array<Multiaddr>` | Provided noAnnounce multiaddrs |
-
-#### Example
-
-```js
-// ...
-const noAnnounceMa = libp2p.addressManager.getNoAnnounceAddrs()
-// [ <Multiaddr 047f00000106f9ba - /ip4/127.0.0.1/tcp/63930> ]
-```
-
 ### transportManager.getAddrs
 
 Get the multiaddrs that libp2p transports are using to listen on.
@@ -663,7 +745,7 @@ Queries the DHT for the n values stored for the given key (without sorting).
 // ...
 
 const key = '/key'
-const { from, val } = await libp2p.contentRouting.get(key)
+const records = await libp2p.contentRouting.getMany(key, 2)
 ```
 
 ### peerRouting.findPeer
@@ -693,6 +775,36 @@ Iterates over all peer routers in series to find the given peer. If the DHT is e
 const peer = await libp2p.peerRouting.findPeer(peerId, options)
 ```
 
+### peerRouting.getClosestPeers
+
+Iterates over all content routers in series to get the closest peers of the given key.
+Once a content router succeeds, the iteration will stop. If the DHT is enabled, it will be queried first.
+
+`libp2p.peerRouting.getClosestPeers(cid, options)`
+
+#### Parameters
+
+| Name | Type | Description |
+|------|------|-------------|
+| key | `Uint8Array` | A CID like key |
+| options | `object` | operation options |
+| options.timeout | `number` | How long the query can take (ms). |
+
+#### Returns
+
+| Type | Description |
+|------|-------------|
+| `AsyncIterable<{ id: PeerId, multiaddrs: Multiaddr[] }` |  Async iterator for peer data |
+
+#### Example
+
+```js
+// Iterate over the closest peers found for the given key
+for await (const peer of libp2p.peerRouting.getClosestPeers(key)) {
+  console.log(peer.id, peer.multiaddrs)
+}
+```
+
 ### peerStore.addressBook.add
 
 Adds known `multiaddrs` of a given peer. If the peer is not known, it will be set with the provided multiaddrs.
@@ -841,32 +953,6 @@ Consider using `addressBook.add()` if you're not sure this is what you want to d
 peerStore.addressBook.add(peerId, multiaddr)
 ```
 
-### peerStore.protoBook.add
-
-Add known `protocols` of a given peer.
-
-`peerStore.protoBook.add(peerId, protocols)`
-
-#### Parameters
-
-| Name | Type | Description |
-|------|------|-------------|
-| peerId | [`PeerId`][peer-id] | peerId to set |
-| protocols | `Array<string>` | protocols to add |
-
-#### Returns
-
-| Type | Description |
-|------|-------------|
-| `ProtoBook` | Returns the Proto Book component |
-
-#### Example
-
-```js
-peerStore.protoBook.add(peerId, protocols)
-```
-
-
 ### peerStore.keyBook.delete
 
 Delete the provided peer from the book.
@@ -1089,6 +1175,31 @@ Set known metadata of a given `peerId`.
 peerStore.metadataBook.set(peerId, 'location', uint8ArrayFromString('Berlin'))
 ```
 
+### peerStore.protoBook.add
+
+Add known `protocols` of a given peer.
+
+`peerStore.protoBook.add(peerId, protocols)`
+
+#### Parameters
+
+| Name | Type | Description |
+|------|------|-------------|
+| peerId | [`PeerId`][peer-id] | peerId to set |
+| protocols | `Array<string>` | protocols to add |
+
+#### Returns
+
+| Type | Description |
+|------|-------------|
+| `ProtoBook` | Returns the Proto Book component |
+
+#### Example
+
+```js
+peerStore.protoBook.add(peerId, protocols)
+```
+
 ### peerStore.protoBook.delete
 
 Delete the provided peer from the book.
@@ -1145,6 +1256,31 @@ peerStore.protoBook.get(peerId)
 // [ '/proto/1.0.0', '/proto/1.1.0' ]
 ```
 
+### peerStore.protoBook.remove
+
+Remove given `protocols` of a given peer.
+
+`peerStore.protoBook.remove(peerId, protocols)`
+
+#### Parameters
+
+| Name | Type | Description |
+|------|------|-------------|
+| peerId | [`PeerId`][peer-id] | peerId to set |
+| protocols | `Array<string>` | protocols to remove |
+
+#### Returns
+
+| Type | Description |
+|------|-------------|
+| `ProtoBook` | Returns the Proto Book component |
+
+#### Example
+
+```js
+peerStore.protoBook.remove(peerId, protocols)
+```
+
 ### peerStore.protoBook.set
 
 Set known `protocols` of a given peer.
@@ -1985,6 +2121,15 @@ This event will be triggered anytime we are disconnected from another peer, rega
 - `peerId`: instance of [`PeerId`][peer-id]
 - `protocols`: array of known, supported protocols for the peer (string identifiers)
 
+### libp2p.addressManager
+
+#### Our addresses have changed
+
+This could be in response to a peer telling us about addresses they have observed, or
+the NatManager performing NAT hole punching.
+
+`libp2p.addressManager.on('change:addresses', () => {})`
+
 ## Types
 
 ### Stats
@@ -2007,7 +2152,7 @@ This event will be triggered anytime we are disconnected from another peer, rega
 
 [address]: https://github.com/libp2p/js-libp2p/tree/master/src/peer-store/address-book.js
 [cid]: https://github.com/multiformats/js-cid
-[connection]: https://github.com/libp2p/js-interfaces/tree/master/src/connection
+[connection]: https://github.com/libp2p/js-libp2p-interfaces/tree/master/packages/interfaces/src/connection
 [multiaddr]: https://github.com/multiformats/js-multiaddr
 [peer-id]: https://github.com/libp2p/js-peer-id
 [keys]: https://github.com/libp2p/js-libp2p-crypto/tree/master/src/keys

doc/CONFIGURATION.md

@@ -1,33 +1,40 @@
-# Configuration
+#
 
-- [Configuration](#configuration)
-  - [Overview](#overview)
-  - [Modules](#modules)
-    - [Transport](#transport)
-    - [Stream Multiplexing](#stream-multiplexing)
-    - [Connection Encryption](#connection-encryption)
-    - [Peer Discovery](#peer-discovery)
-    - [Content Routing](#content-routing)
-    - [Peer Routing](#peer-routing)
-    - [DHT](#dht)
-    - [Pubsub](#pubsub)
-  - [Customizing libp2p](#customizing-libp2p)
-    - [Examples](#examples)
-      - [Basic setup](#basic-setup)
-      - [Customizing Peer Discovery](#customizing-peer-discovery)
-      - [Setup webrtc transport and discovery](#setup-webrtc-transport-and-discovery)
-      - [Customizing Pubsub](#customizing-pubsub)
-      - [Customizing DHT](#customizing-dht)
-      - [Setup with Content and Peer Routing](#setup-with-content-and-peer-routing)
-      - [Setup with Relay](#setup-with-relay)
-      - [Setup with Keychain](#setup-with-keychain)
-      - [Configuring Dialing](#configuring-dialing)
-      - [Configuring Connection Manager](#configuring-connection-manager)
-      - [Configuring Transport Manager](#configuring-transport-manager)
-      - [Configuring Metrics](#configuring-metrics)
-      - [Configuring PeerStore](#configuring-peerstore)
-      - [Customizing Transports](#customizing-transports)
-  - [Configuration examples](#configuration-examples)
+- [Overview](#overview)
+- [Modules](#modules)
+  - [Transport](#transport)
+  - [Stream Multiplexing](#stream-multiplexing)
+  - [Connection Encryption](#connection-encryption)
+  - [Peer Discovery](#peer-discovery)
+  - [Content Routing](#content-routing)
+  - [Peer Routing](#peer-routing)
+  - [DHT](#dht)
+  - [Pubsub](#pubsub)
+- [Customizing libp2p](#customizing-libp2p)
+  - [Examples](#examples)
+    - [Basic setup](#basic-setup)
+    - [Customizing Peer Discovery](#customizing-peer-discovery)
+    - [Setup webrtc transport and discovery](#setup-webrtc-transport-and-discovery)
+    - [Customizing Pubsub](#customizing-pubsub)
+    - [Customizing DHT](#customizing-dht)
+    - [Setup with Content and Peer Routing](#setup-with-content-and-peer-routing)
+    - [Setup with Relay](#setup-with-relay)
+    - [Setup with Auto Relay](#setup-with-auto-relay)
+    - [Setup with Keychain](#setup-with-keychain)
+    - [Configuring Dialing](#configuring-dialing)
+    - [Configuring Connection Manager](#configuring-connection-manager)
+    - [Configuring Connection Gater](#configuring-connection-gater)
+      - [Outgoing connections](#outgoing-connections)
+      - [Incoming connections](#incoming-connections)
+    - [Configuring Transport Manager](#configuring-transport-manager)
+    - [Configuring Metrics](#configuring-metrics)
+    - [Configuring PeerStore](#configuring-peerstore)
+    - [Customizing Transports](#customizing-transports)
+    - [Configuring the NAT Manager](#configuring-the-nat-manager)
+      - [Browser support](#browser-support)
+      - [UPnP and NAT-PMP](#upnp-and-nat-pmp)
+    - [Configuring protocol name](#configuring-protocol-name)
+- [Configuration examples](#configuration-examples)
 
 ## Overview
 
@@ -192,9 +199,9 @@ When [creating a libp2p node](./API.md#create), the modules needed should be spe
 
 ```js
 const modules = {
-  transport: [],
-  streamMuxer: [],
-  connEncryption: [],
+  transports: [],
+  streamMuxers: [],
+  connectionEncryption: [],
   contentRouting: [],
   peerRouting: [],
   peerDiscovery: [],
@@ -206,14 +213,14 @@ const modules = {
 Moreover, the majority of the modules can be customized via option parameters. This way, it is also possible to provide this options through a `config` object. This config object should have the property name of each building block to configure, the same way as the modules specification.
 
 Besides the `modules` and `config`, libp2p allows other internal options and configurations:
-- `datastore`: an instance of [ipfs/interface-datastore](https://github.com/ipfs/interface-datastore/) modules.
+- `datastore`: an instance of [ipfs/interface-datastore](https://github.com/ipfs/js-ipfs-interfaces/tree/master/packages/interface-datastore) modules.
   - This is used in modules such as the DHT. If it is not provided, `js-libp2p` will use an in memory datastore.
 - `peerId`: the identity of the node, an instance of [libp2p/js-peer-id](https://github.com/libp2p/js-peer-id).
   - This is particularly useful if you want to reuse the same `peer-id`, as well as for modules like `libp2p-delegated-content-routing`, which need a `peer-id` in their instantiation.
-- `addresses`: an object containing `listen`, `announce` and `noAnnounce` properties with `Array<string>`:
+- `addresses`: an object containing `listen`, `announce` and `announceFilter`:
   - `listen` addresses will be provided to the libp2p underlying transports for listening on them.
   - `announce` addresses will be used to compute the advertises that the node should advertise to the network.
-  - `noAnnounce` addresses will be used as a filter to compute the advertises that the node should advertise to the network.
+  - `announceFilter`: filter function used to filter announced addresses programmatically: `(ma: Array<multiaddr>) => Array<multiaddr>`. Default: returns all addresses. [`libp2p-utils`](https://github.com/libp2p/js-libp2p-utils) provides useful [multiaddr utilities](https://github.com/libp2p/js-libp2p-utils/blob/master/API.md#multiaddr-isloopbackma) to create your filters.
 
 ### Examples
 
@@ -228,57 +235,59 @@ Besides the `modules` and `config`, libp2p allows other internal options and con
 //   dht: kad-dht
 //   pubsub: gossipsub
 
-const Libp2p = require('libp2p')
-const TCP = require('libp2p-tcp')
-const WS = require('libp2p-websockets')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-const MulticastDNS = require('libp2p-mdns')
-const DHT = require('libp2p-kad-dht')
-const GossipSub = require('libp2p-gossipsub')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { WebSockets } from '@libp2p/websockets'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { MulticastDNS } from '@libp2p/mdns'
+import { KadDHT } from '@libp2p/kad-dht'
+import { GossipSub } from 'libp2p-gossipsub'
 
-const node = await Libp2p.create({
-  modules: {
-    transport: [
-      TCP,
-      new WS() // It can take instances too!
-    ],
-    streamMuxer: [MPLEX],
-    connEncryption: [NOISE],
-    peerDiscovery: [MulticastDNS],
-    dht: DHT,
-    pubsub: GossipSub
-  }
+const node = await createLibp2p({
+  transports: [
+    new TCP(),
+    new WS()
+  ],
+  streamMuxers: [new Mplex()],
+  connectionEncryption: [new Noise()],
+  peerDiscovery: [MulticastDNS],
+  dht: DHT,
+  pubsub: GossipSub
 })
 ```
 
 #### Customizing Peer Discovery
 
 ```js
-const Libp2p = require('libp2p')
-const TCP = require('libp2p-tcp')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-const MulticastDNS = require('libp2p-mdns')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { MulticastDNS } from '@libp2p/mdns'
+import { Bootstrap } from '@libp2p/bootstrap'
 
-const node = await Libp2p.create({
-  modules: {
-    transport: [TCP],
-    streamMuxer: [MPLEX],
-    connEncryption: [NOISE],
-    peerDiscovery: [MulticastDNS]
-  },
-  config: {
-    peerDiscovery: {
-      autoDial: true,             // Auto connect to discovered peers (limited by ConnectionManager minConnections)
-      // The `tag` property will be searched when creating the instance of your Peer Discovery service.
-      // The associated object, will be passed to the service when it is instantiated.
-      [MulticastDNS.tag]: {
-        interval: 1000,
-        enabled: true
-      }
-      // .. other discovery module options.
-    }
+const node = await createLibp2p({
+  transports: [new TCP()],
+  streamMuxers: [new Mplex()],
+  connectionEncryption: [new Noise()],
+  peerDiscovery: [
+    new MulticastDNS({
+      interval: 1000
+    }),
+    new Bootstrap(
+      list: [ // A list of bootstrap peers to connect to starting up the node
+        "/ip4/104.131.131.82/tcp/4001/ipfs/QmaCpDMGvV2BGHeYERUEnRQAwe3N8SzbUtfsmvsqQLuvuJ",
+        "/dnsaddr/bootstrap.libp2p.io/ipfs/QmNnooDu7bfjPFoTZYxMNLWUQJyrVwtbZg5gBMjTezGAJN",
+        "/dnsaddr/bootstrap.libp2p.io/ipfs/QmQCU2EcMqAqQPR2i9bChDtGNJchTbq5TbXJJ16u19uLTa",
+      ],
+      interval: 2000
+    )
+  ],
+  connectionManager: {
+    autoDial: true             // Auto connect to discovered peers (limited by ConnectionManager minConnections)
+    // The `tag` property will be searched when creating the instance of your Peer Discovery service.
+    // The associated object, will be passed to the service when it is instantiated.
   }
 })
 ```
@@ -286,55 +295,50 @@ const node = await Libp2p.create({
 #### Setup webrtc transport and discovery
 
 ```js
+import { createLibp2p } from 'libp2p'
+import { WebSockets } from '@libp2p/websockets'
+import { WebRTCStar } from '@libp2p/webrtc-star'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
 
-const Libp2p = require('libp2p')
-const WS = require('libp2p-websockets')
-const WebRTCStar = require('libp2p-webrtc-star')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-
-const node = await Libp2p.create({
-  modules: {
-    transport: [
-      WS,
-      WebRTCStar
-    ],
-    streamMuxer: [MPLEX],
-    connEncryption: [NOISE],
-  },
-  config: {
-    peerDiscovery: {
-      [WebRTCStar.tag]: {
-        enabled: true
-      }
-    }
-  }
+const node = await createLibp2p({
+  transports: [
+    new WebSockets(),
+    new WebRTCStar()
+  ],
+  streamMuxers: [
+    new Mplex()
+  ],
+  connectionEncryption: [
+    new Noise()
+  ]
 })
 ```
 
 #### Customizing Pubsub
 
 ```js
-const Libp2p = require('libp2p')
-const TCP = require('libp2p-tcp')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-const GossipSub = require('libp2p-gossipsub')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { GossipSub } from 'libp2p-gossipsub'
+import { SignaturePolicy } from '@libp2p/interfaces/pubsub'
 
-const node = await Libp2p.create({
-  modules: {
-    transport: [TCP],
-    streamMuxer: [MPLEX],
-    connEncryption: [NOISE],
-    pubsub: GossipSub
-  },
-  config: {
-    pubsub: {                     // The pubsub options (and defaults) can be found in the pubsub router documentation
-      enabled: true,
-      emitSelf: true,             // whether the node should emit to self on publish
-      signMessages: true,         // if messages should be signed
-      strictSigning: true         // if message signing should be required
-    }
+const node = await createLibp2p({
+    transports: [
+      new TCP()
+    ],
+    streamMuxers: [
+      new Mplex()
+    ],
+    connectionEncryption: [
+      new Noise()
+    ],
+    pubsub: new GossipSub({
+      emitSelf: false,                                  // whether the node should emit to self on publish
+      globalSignaturePolicy: SignaturePolicy.StrictSign // message signing policy
+    })
   }
 })
 ```
@@ -342,84 +346,121 @@ const node = await Libp2p.create({
 #### Customizing DHT
 
 ```js
-const Libp2p = require('libp2p')
-const TCP = require('libp2p-tcp')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-const DHT = require('libp2p-kad-dht')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { KadDHT } from '@libp2p/kad-dht'
 
-const node = await Libp2p.create({
-  modules: {
-    transport: [TCP],
-    streamMuxer: [MPLEX],
-    connEncryption: [NOISE],
-    dht: DHT
-  },
-  config: {
-    dht: {                        // The DHT options (and defaults) can be found in its documentation
-      kBucketSize: 20,
-      enabled: true,
-      randomWalk: {
-        enabled: true,            // Allows to disable discovery (enabled by default)
-        interval: 300e3,
-        timeout: 10e3
-      }
-    }
-  }
+const node = await createLibp2p({
+  transports: [
+    new TCP()
+  ],
+  streamMuxers: [
+    new Mplex()
+  ],
+  connectionEncryption: [
+    new Noise()
+  ],
+  dht: new KadDHT({
+    kBucketSize: 20,
+    clientMode: false           // Whether to run the WAN DHT in client or server mode (default: client mode)
+  })
 })
 ```
 
 #### Setup with Content and Peer Routing
 
 ```js
-const Libp2p = require('libp2p')
-const TCP = require('libp2p-tcp')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-const DelegatedPeerRouter = require('libp2p-delegated-peer-routing')
-const DelegatedContentRouter = require('libp2p-delegated-content-routing')
-const PeerId = require('peer-id')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { create as ipfsHttpClient } from 'ipfs-http-client'
+import { DelegatedPeerRouting } from '@libp2p/delegated-peer-routing'
+import { DelegatedContentRouting} from '@libp2p/delegated-content-routing'
+
 
 // create a peerId
 const peerId = await PeerId.create()
 
-const node = await Libp2p.create({
-  modules: {
-    transport: [TCP],
-    streamMuxer: [MPLEX],
-    connEncryption: [NOISE],
-    contentRouting: [
-      new DelegatedContentRouter(peerId)
-    ],
-    peerRouting: [
-      new DelegatedPeerRouter()
-    ],
-  },
-  peerId
+const delegatedPeerRouting = new DelegatedPeerRouting(ipfsHttpClient.create({
+  host: 'node0.delegate.ipfs.io', // In production you should setup your own delegates
+  protocol: 'https',
+  port: 443
+}))
+
+const delegatedContentRouting = new DelegatedContentRouting(peerId, ipfsHttpClient.create({
+  host: 'node0.delegate.ipfs.io', // In production you should setup your own delegates
+  protocol: 'https',
+  port: 443
+}))
+
+const node = await createLibp2p({
+  transports: [new TCP()],
+  streamMuxers: [new Mplex()],
+  connectionEncryption: [new Noise()],
+  contentRouting: [
+    delegatedContentRouting
+  ],
+  peerRouting: [
+    delegatedPeerRouting
+  ],
+  peerId,
+  peerRouting: { // Peer routing configuration
+    refreshManager: { // Refresh known and connected closest peers
+      enabled: true, // Should find the closest peers.
+      interval: 6e5, // Interval for getting the new for closest peers of 10min
+      bootDelay: 10e3 // Delay for the initial query for closest peers
+    }
+  }
 })
 ```
 
 #### Setup with Relay
 
 ```js
-const Libp2p = require('libp2p')
-const TCP = require('libp2p-tcp')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
 
-const node = await Libp2p.create({
-  modules: {
-    transport: [TCP],
-    streamMuxer: [MPLEX],
-    connEncryption: [NOISE]
-  },
-  config: {
-    relay: {                   // Circuit Relay options (this config is part of libp2p core configurations)
-      enabled: true,           // Allows you to dial and accept relayed connections. Does not make you a relay.
-      hop: {
-        enabled: true,         // Allows you to be a relay for other peers
-        active: true           // You will attempt to dial destination peers if you are not connected to them
-      }
+const node = await createLibp2p({
+  transports: [new TCP()],
+  streamMuxers: [new Mplex()],
+  connectionEncryption: [new Noise()],
+  relay: {                   // Circuit Relay options (this config is part of libp2p core configurations)
+    enabled: true,           // Allows you to dial and accept relayed connections. Does not make you a relay.
+    hop: {
+      enabled: true,         // Allows you to be a relay for other peers
+      active: true           // You will attempt to dial destination peers if you are not connected to them
+    },
+    advertise: {
+      bootDelay: 15 * 60 * 1000, // Delay before HOP relay service is advertised on the network
+      enabled: true,          // Allows you to disable the advertise of the Hop service
+      ttl: 30 * 60 * 1000     // Delay Between HOP relay service advertisements on the network
+    }
+  }
+})
+```
+
+#### Setup with Auto Relay
+
+```js
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+
+const node = await createLibp2p({
+  transports: [new TCP()],
+  streamMuxers: [new Mplex()],
+  connectionEncryption: [new Noise()]
+  relay: {                   // Circuit Relay options (this config is part of libp2p core configurations)
+    enabled: true,           // Allows you to dial and accept relayed connections. Does not make you a relay.
+    autoRelay: {
+      enabled: true,         // Allows you to bind to relays with HOP enabled for improving node dialability
+      maxListeners: 2         // Configure maximum number of HOP relays to use
     }
   }
 })
@@ -435,25 +476,26 @@ Libp2p allows you to setup a secure keychain to manage your keys. The keychain c
 | datastore | `object` | must implement [ipfs/interface-datastore](https://github.com/ipfs/interface-datastore) |
 
 ```js
-const Libp2p = require('libp2p')
-const TCP = require('libp2p-tcp')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-const LevelStore = require('datastore-level')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { LevelDatastore } from 'datastore-level'
 
-const node = await Libp2p.create({
-  modules: {
-    transport: [TCP],
-    streamMuxer: [MPLEX],
-    connEncryption: [NOISE]
-  },
+const datastore = new LevelDatastore('path/to/store')
+await datastore.open()
+
+const node = await createLibp2p({
+  transports: [new TCP()],
+  streamMuxers: [new Mplex()],
+  connectionEncryption: [new Noise()],
   keychain: {
     pass: 'notsafepassword123456789',
-    datastore: new LevelStore('path/to/store')
+    datastore: dsInstant,
   }
 })
 
-await libp2p.loadKeychain()
+await node.loadKeychain()
 ```
 
 #### Configuring Dialing
@@ -463,27 +505,36 @@ Dialing in libp2p can be configured to limit the rate of dialing, and how long d
 | Name | Type | Description |
 |------|------|-------------|
 | maxParallelDials | `number` | How many multiaddrs we can dial in parallel. |
+| maxAddrsToDial | `number` | How many multiaddrs is the dial allowed to dial for a single peer. |
 | maxDialsPerPeer | `number` | How many multiaddrs we can dial per peer, in parallel. |
 | dialTimeout | `number` | Second dial timeout per peer in ms. |
+| resolvers | `object` | Dial [Resolvers](https://github.com/multiformats/js-multiaddr/blob/master/src/resolvers/index.js) for resolving multiaddrs |
+| addressSorter | `(Array<Address>) => Array<Address>` | Sort the known addresses of a peer before trying to dial. |
 
 The below configuration example shows how the dialer should be configured, with the current defaults:
 
 ```js
-const Libp2p = require('libp2p')
-const TCP = require('libp2p-tcp')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
 
-const node = await Libp2p.create({
-  modules: {
-    transport: [TCP],
-    streamMuxer: [MPLEX],
-    connEncryption: [NOISE]
-  },
+import { dnsaddrResolver } from '@multiformats/multiaddr/resolvers'
+import { publicAddressesFirst } from '@libp2p-utils/address-sort'
+
+const node = await createLibp2p({
+  transports: [new TCP()],
+  streamMuxers: [new Mplex()],
+  connectionEncryption: [new Noise()],
   dialer: {
     maxParallelDials: 100,
+    maxAddrsToDial: 25,
     maxDialsPerPeer: 4,
-    dialTimeout: 30e3
+    dialTimeout: 30e3,
+    resolvers: {
+      dnsaddr: dnsaddrResolver
+    },
+    addressSorter: publicAddressesFirst
   }
 ```
 
@@ -492,17 +543,15 @@ const node = await Libp2p.create({
 The Connection Manager prunes Connections in libp2p whenever certain limits are exceeded. If Metrics are enabled, you can also configure the Connection Manager to monitor the bandwidth of libp2p and prune connections as needed. You can read more about what Connection Manager does at [./CONNECTION_MANAGER.md](./CONNECTION_MANAGER.md). The configuration values below show the defaults for Connection Manager. See [./CONNECTION_MANAGER.md](./CONNECTION_MANAGER.md#options) for a full description of the parameters.
 
 ```js
-const Libp2p = require('libp2p')
-const TCP = require('libp2p-tcp')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
 
-const node = await Libp2p.create({
-  modules: {
-    transport: [TCP],
-    streamMuxer: [MPLEX],
-    connEncryption: [NOISE]
-  },
+const node = await createLibp2p({
+  transports: [new TCP()],
+  streamMuxers: [new Mplex()],
+  connectionEncryption: [new Noise()],
   connectionManager: {
     maxConnections: Infinity,
     minConnections: 0,
@@ -518,24 +567,142 @@ const node = await Libp2p.create({
 })
 ```
 
-#### Configuring Transport Manager
+#### Configuring Connection Gater
 
-The Transport Manager is responsible for managing the libp2p transports life cycle. This includes starting listeners for the provided listen addresses, closing these listeners and dialing using the provided transports. By default, if a libp2p node has a list of multiaddrs for listenning on and there are no valid transports for those multiaddrs, libp2p will throw an error on startup and shutdown. However, for some applications it is perfectly acceptable for libp2p nodes to start in dial only mode if all the listen multiaddrs failed. This error tolerance can be enabled as follows:
+The Connection Gater allows us to prevent making incoming and outgoing connections to peers and storing
+multiaddrs in the address book.
+
+The order in which methods are called is as follows:
+
+##### Outgoing connections
+
+1. `connectionGater.denyDialPeer(...)`
+2. `connectionGater.denyDialMultiaddr(...)`
+3. `connectionGater.denyOutboundConnection(...)`
+4. `connectionGater.denyOutboundEncryptedConnection(...)`
+5. `connectionGater.denyOutboundUpgradedConnection(...)`
+
+##### Incoming connections
+
+1. `connectionGater.denyInboundConnection(...)`
+2. `connectionGater.denyInboundEncryptedConnection(...)`
+3. `connectionGater.denyInboundUpgradedConnection(...)`
 
 ```js
-const Libp2p = require('libp2p')
-const TCP = require('libp2p-tcp')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
+const node = await createLibp2p({
+  // .. other config
+  connectionGater: {
+    /**
+     * denyDialMultiaddr tests whether we're permitted to Dial the
+     * specified peer.
+     *
+     * This is called by the dialer.connectToPeer implementation before
+     * dialling a peer.
+     *
+     * Return true to prevent dialing the passed peer.
+     */
+    denyDialPeer: (peerId: PeerId) => Promise<boolean>
 
-const { FaultTolerance } = require('libp2p/src/transport-manager')}
+    /**
+     * denyDialMultiaddr tests whether we're permitted to dial the specified
+     * multiaddr for the given peer.
+     *
+     * This is called by the dialer.connectToPeer implementation after it has
+     * resolved the peer's addrs, and prior to dialling each.
+     *
+     * Return true to prevent dialing the passed peer on the passed multiaddr.
+     */
+    denyDialMultiaddr: (peerId: PeerId, multiaddr: Multiaddr) => Promise<boolean>
 
-const node = await Libp2p.create({
-  modules: {
-    transport: [TCP],
-    streamMuxer: [MPLEX],
-    connEncryption: [NOISE]
-  },
+    /**
+     * denyInboundConnection tests whether an incipient inbound connection is allowed.
+     *
+     * This is called by the upgrader, or by the transport directly (e.g. QUIC,
+     * Bluetooth), straight after it has accepted a connection from its socket.
+     *
+     * Return true to deny the incoming passed connection.
+     */
+    denyInboundConnection: (maConn: MultiaddrConnection) => Promise<boolean>
+
+    /**
+     * denyOutboundConnection tests whether an incipient outbound connection is allowed.
+     *
+     * This is called by the upgrader, or by the transport directly (e.g. QUIC,
+     * Bluetooth), straight after it has created a connection with its socket.
+     *
+     * Return true to deny the incoming passed connection.
+     */
+    denyOutboundConnection: (peerId: PeerId, maConn: MultiaddrConnection) => Promise<boolean>
+
+    /**
+     * denyInboundEncryptedConnection tests whether a given connection, now encrypted,
+     * is allowed.
+     *
+     * This is called by the upgrader, after it has performed the security
+     * handshake, and before it negotiates the muxer, or by the directly by the
+     * transport, at the exact same checkpoint.
+     *
+     * Return true to deny the passed secured connection.
+     */
+    denyInboundEncryptedConnection: (peerId: PeerId, maConn: MultiaddrConnection) => Promise<boolean>
+
+    /**
+     * denyOutboundEncryptedConnection tests whether a given connection, now encrypted,
+     * is allowed.
+     *
+     * This is called by the upgrader, after it has performed the security
+     * handshake, and before it negotiates the muxer, or by the directly by the
+     * transport, at the exact same checkpoint.
+     *
+     * Return true to deny the passed secured connection.
+     */
+    denyOutboundEncryptedConnection: (peerId: PeerId, maConn: MultiaddrConnection) => Promise<boolean>
+
+    /**
+     * denyInboundUpgradedConnection tests whether a fully capable connection is allowed.
+     *
+     * This is called after encryption has been negotiated and the connection has been
+     * multiplexed, if a multiplexer is configured.
+     *
+     * Return true to deny the passed upgraded connection.
+     */
+    denyInboundUpgradedConnection: (peerId: PeerId, maConn: MultiaddrConnection) => Promise<boolean>
+
+    /**
+     * denyOutboundUpgradedConnection tests whether a fully capable connection is allowed.
+     *
+     * This is called after encryption has been negotiated and the connection has been
+     * multiplexed, if a multiplexer is configured.
+     *
+     * Return true to deny the passed upgraded connection.
+     */
+    denyOutboundUpgradedConnection: (peerId: PeerId, maConn: MultiaddrConnection) => Promise<boolean>
+
+    /**
+     * Used by the address book to filter passed addresses.
+     *
+     * Return true to allow storing the passed multiaddr for the passed peer.
+     */
+    filterMultiaddrForPeer: (peer: PeerId, multiaddr: Multiaddr) => Promise<boolean>
+  }
+})
+```
+
+#### Configuring Transport Manager
+
+The Transport Manager is responsible for managing the libp2p transports life cycle. This includes starting listeners for the provided listen addresses, closing these listeners and dialing using the provided transports. By default, if a libp2p node has a list of multiaddrs for listening on and there are no valid transports for those multiaddrs, libp2p will throw an error on startup and shutdown. However, for some applications it is perfectly acceptable for libp2p nodes to start in dial only mode if all the listen multiaddrs failed. This error tolerance can be enabled as follows:
+
+```js
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { FaultTolerance } from 'libp2p/transport-manager'
+
+const node = await createLibp2p({
+  transports: [new TCP()],
+  streamMuxers: [new Mplex()],
+  connectionEncryption: [new Noise()],
   transportManager: {
     faultTolerance: FaultTolerance.NO_FATAL
   }
@@ -557,17 +724,15 @@ Metrics are disabled in libp2p by default. You can enable and configure them as
 The below configuration example shows how the metrics should be configured. Aside from enabled being `false` by default, the following default configuration options are listed below:
 
 ```js
-const Libp2p = require('libp2p')
-const TCP = require('libp2p-tcp')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
 
-const node = await Libp2p.create({
-  modules: {
-    transport: [TCP],
-    streamMuxer: [MPLEX],
-    connEncryption: [NOISE]
-  },
+const node = await createLibp2p({
+  transports: [new TCP()],
+  streamMuxers: [new Mplex()],
+  connectionEncryption: [new Noise()]
   metrics: {
     enabled: true,
     computeThrottleMaxQueueSize: 1000,
@@ -596,20 +761,20 @@ The threshold number represents the maximum number of "dirty peers" allowed in t
 The below configuration example shows how the PeerStore should be configured. Aside from persistence being `false` by default, the following default configuration options are listed below:
 
 ```js
-const Libp2p = require('libp2p')
-const TCP = require('libp2p-tcp')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { LevelDatastore } from 'datastore-level'
 
-const LevelStore = require('datastore-level')
+const datastore = new LevelDatastore('path/to/store')
+await datastore.open() // level database must be ready before node boot
 
-const node = await Libp2p.create({
-  modules: {
-    transport: [TCP],
-    streamMuxer: [MPLEX],
-    connEncryption: [NOISE]
-  },
-  datastore: new LevelStore('path/to/store'),
+const node = await createLibp2p({
+  datastore, // pass the opened datastore
+  transports: [new TCP()],
+  streamMuxers: [new Mplex()],
+  connectionEncryption: [new Noise()],
   peerStore: {
     persistence: true,
     threshold: 5
@@ -622,19 +787,23 @@ const node = await Libp2p.create({
 Some Transports can be passed additional options when they are created. For example, `libp2p-webrtc-star` accepts an optional, custom `wrtc` implementation. In addition to libp2p passing itself and an `Upgrader` to handle connection upgrading, libp2p will also pass the options, if they are provided, from `config.transport`.
 
 ```js
-const Libp2p = require('libp2p')
-const WebRTCStar = require('libp2p-webrtc-star')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-const wrtc = require('wrtc')
+import { createLibp2p } from 'libp2p'
+import { WebRTCStar } from '@libp2p/webrtc-star'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import wrtc from 'wrtc'
 
 const transportKey = WebRTCStar.prototype[Symbol.toStringTag]
-const node = await Libp2p.create({
-  modules: {
-    transport: [WebRTCStar],
-    streamMuxer: [MPLEX],
-    connEncryption: [NOISE]
-  },
+const node = await createLibp2p({
+  transports: [
+    new WebRTCStar()
+  ],
+  streamMuxers: [
+    new Mplex()
+  ],
+  connectionEncryption: [
+    new Noise()
+  ],
   config: {
     transport: {
       [transportKey]: {
@@ -645,12 +814,94 @@ const node = await Libp2p.create({
 })
 ```
 
+During Libp2p startup, transport listeners will be created for the configured listen multiaddrs.  Some transports support custom listener options and you can set them using the `listenerOptions` in the transport configuration. For example, [libp2p-webrtc-star](https://github.com/libp2p/js-libp2p-webrtc-star) transport listener supports the configuration of its underlying [simple-peer](https://github.com/feross/simple-peer) ice server(STUN/TURN) config as follows:
+
+```js
+const transportKey = WebRTCStar.prototype[Symbol.toStringTag]
+const node = await createLibp2p({
+  transports: [
+    new WebRTCStar()
+  ],
+  streamMuxers: [
+    new Mplex()
+  ],
+  connectionEncryption: [
+    new Noise()
+  ],
+  addresses: {
+    listen: ['/dns4/your-wrtc-star.pub/tcp/443/wss/p2p-webrtc-star'] // your webrtc dns multiaddr
+  },
+  config: {
+    transport: {
+      [transportKey]: {
+        listenerOptions: {
+          config: {
+            iceServers: [
+              {"urls": ["turn:YOUR.TURN.SERVER:3478"], "username": "YOUR.USER", "credential": "YOUR.PASSWORD"},
+              {"urls": ["stun:YOUR.STUN.SERVER:3478"], "username": "", "credential": ""}]
+          }
+        }
+      }
+    }
+  }
+})
+```
+
+#### Configuring the NAT Manager
+
+Network Address Translation (NAT) is a function performed by your router to enable multiple devices on your local network to share a single IPv4 address. It's done transparently for outgoing connections, ensuring the correct response traffic is routed to your computer, but if you wish to accept incoming connections some configuration is necessary.
+
+The NAT manager can be configured as follows:
+
+```js
+const node = await createLibp2p({
+  config: {
+    nat: {
+      description: 'my-node', // set as the port mapping description on the router, defaults the current libp2p version and your peer id
+      enabled: true, // defaults to true
+      gateway: '192.168.1.1', // leave unset to auto-discover
+      externalIp: '80.1.1.1', // leave unset to auto-discover
+      localAddress: '129.168.1.123', // leave unset to auto-discover
+      ttl: 7200, // TTL for port mappings (min 20 minutes)
+      keepAlive: true, // Refresh port mapping after TTL expires
+    }
+  }
+})
+```
+
+##### Browser support
+
+Browsers cannot open TCP ports or send the UDP datagrams necessary to configure external port mapping - to accept incoming connections in the browser please use a WebRTC transport.
+
+##### UPnP and NAT-PMP
+
+By default under nodejs libp2p will attempt to use [UPnP](https://en.wikipedia.org/wiki/Universal_Plug_and_Play) to configure your router to allow incoming connections to any TCP transports that have been configured.
+
+[NAT-PMP](http://miniupnp.free.fr/nat-pmp.html) is a feature of some modern routers which performs a similar job to UPnP. NAT-PMP is disabled by default, if enabled libp2p will try to use NAT-PMP and will fall back to UPnP if it fails.
+
+#### Configuring protocol name
+
+Changing the protocol name prefix can isolate default public network (IPFS) for custom purposes.
+
+```js
+const node = await createLibp2p({
+  protocolPrefix: 'ipfs' // default
+})
+/*
+protocols: [
+  "/ipfs/id/1.0.0", // identify service protocol (if we have multiplexers)
+  "/ipfs/id/push/1.0.0", // identify service push protocol (if we have multiplexers)
+  "/ipfs/ping/1.0.0", // built-in ping protocol
+]
+*/
+```
+
 ## Configuration examples
 
 As libp2p is designed to be a modular networking library, its usage will vary based on individual project needs. We've included links to some existing project configurations for your reference, in case you wish to replicate their configuration:
 
-- [libp2p-ipfs-nodejs](https://github.com/ipfs/js-ipfs/blob/master/packages/ipfs/src/core/runtime/libp2p-nodejs.js) - libp2p configuration used by js-ipfs when running in Node.js
-- [libp2p-ipfs-browser](https://github.com/ipfs/js-ipfs/blob/master/packages/ipfs/src/core/runtime/libp2p-browser.js) - libp2p configuration used by js-ipfs when running in a Browser (that supports WebRTC)
+- [libp2p-ipfs-nodejs](https://github.com/ipfs/js-ipfs/blob/master/packages/ipfs-core-config/src/libp2p.js) - libp2p configuration used by js-ipfs when running in Node.js
+- [libp2p-ipfs-browser](https://github.com/ipfs/js-ipfs/blob/master/packages/ipfs-core-config/src/libp2p.browser.js) - libp2p configuration used by js-ipfs when running in a Browser (that supports WebRTC)
 
 If you have developed a project using `js-libp2p`, please consider submitting your configuration to this list so that it can be found easily by other users.
 

doc/GETTING_STARTED.md

@@ -12,7 +12,6 @@ Welcome to libp2p! This guide will walk you through setting up a fully functiona
       - [Running Libp2p](#running-libp2p)
     - [Custom setup](#custom-setup)
       - [Peer Discovery](#peer-discovery)
-      - [Pubsub](#pubsub)
   - [What is next](#what-is-next)
 
 ## Install
@@ -46,13 +45,11 @@ npm install libp2p-websockets
 Now that we have the module installed, let's configure libp2p to use the Transport. We'll use the [`Libp2p.create`](./API.md#create) method, which takes a single configuration object as its only parameter. We can add the Transport by passing it into the `modules.transport` array:
 
 ```js
-const Libp2p = require('libp2p')
-const WebSockets = require('libp2p-websockets')
+import { createLibp2p } from 'libp2p'
+import { WebSockets } from '@libp2p/websockets'
 
-const node = await Libp2p.create({
-  modules: {
-    transport: [WebSockets]
-  }
+const node = await createLibp2p({
+  transports: [new WebSockets()]
 })
 ```
 
@@ -78,15 +75,13 @@ npm install libp2p-noise
 With `libp2p-noise` installed, we can add it to our existing configuration by importing it and adding it to the `modules.connEncryption` array:
 
 ```js
-const Libp2p = require('libp2p')
-const WebSockets = require('libp2p-websockets')
-const { NOISE } = require('libp2p-noise')
+import { createLibp2p } from 'libp2p'
+import { WebSockets } from '@libp2p/websockets'
+import { Noise } from '@chainsafe/libp2p-noise'
 
-const node = await Libp2p.create({
-  modules: {
-    transport: [WebSockets],
-    connEncryption: [NOISE]
-  }
+const node = await createLibp2p({
+  transports: [new WebSockets()],
+  connectionEncryption: [new Noise()]
 })
 ```
 
@@ -110,17 +105,15 @@ npm install libp2p-mplex
 ```
 
 ```js
-const Libp2p = require('libp2p')
-const WebSockets = require('libp2p-websockets')
-const { NOISE } = require('libp2p-noise')
-const MPLEX = require('libp2p-mplex')
+import { createLibp2p } from 'libp2p'
+import { WebSockets } from '@libp2p/websockets'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { Mplex } from '@libp2p/mplex'
 
-const node = await Libp2p.create({
-  modules: {
-    transport: [WebSockets],
-    connEncryption: [NOISE],
-    streamMuxer: [MPLEX]
-  }
+const node = await createLibp2p({
+  transports: [new WebSockets()],
+  connectionEncryption: [new Noise()],
+  streamMuxers: [new Mplex()]
 })
 ```
 
@@ -137,20 +130,18 @@ If you want to know more about libp2p stream multiplexing, you should read the f
 Now that you have configured a [**Transport**][transport], [**Crypto**][crypto] and [**Stream Multiplexer**](streamMuxer) module, you can start your libp2p node. We can start and stop libp2p using the [`libp2p.start()`](./API.md#start) and [`libp2p.stop()`](./API.md#stop) methods.
 
 ```js
-const Libp2p = require('libp2p')
-const WebSockets = require('libp2p-websockets')
-const { NOISE } = require('libp2p-noise')
-const MPLEX = require('libp2p-mplex')
+import { createLibp2p } from 'libp2p'
+import { WebSockets } from '@libp2p/websockets'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { Mplex } from '@libp2p/mplex'
 
-const node = await Libp2p.create({
+const node = await createLibp2p({
   addresses: {
     listen: ['/ip4/127.0.0.1/tcp/8000/ws']
   },
-  modules: {
-    transport: [WebSockets],
-    connEncryption: [NOISE],
-    streamMuxer: [MPLEX]
-  }
+  transports: [new WebSockets()],
+  connectionEncryption: [new Noise()],
+  streamMuxers: [new Mplex()]
 })
 
 // start libp2p
@@ -195,36 +186,38 @@ npm install libp2p-bootstrap
 We can provide specific configurations for each protocol within a `config.peerDiscovery` property in the options as shown below.
 
 ```js
-const Libp2p = require('libp2p')
-const WebSockets = require('libp2p-websockets')
-const { NOISE } = require('libp2p-noise')
-const MPLEX = require('libp2p-mplex')
+import { createLibp2p } from 'libp2p'
+import { WebSockets } from '@libp2p/websockets'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { Mplex } from '@libp2p/mplex'
 
-const Bootstrap = require('libp2p-bootstrap')
+import { Bootstrap } from '@libp2p/bootstrap'
 
 // Known peers addresses
 const bootstrapMultiaddrs = [
-  '/dns4/ams-1.bootstrap.libp2p.io/tcp/443/wss/p2p/QmSoLer265NRgSp2LA3dPaeykiS1J6DifTC88f5uVQKNAd',
-  '/dns4/lon-1.bootstrap.libp2p.io/tcp/443/wss/p2p/QmSoLMeWqB7YGVLJN3pNLQpmmEk35v6wYtsMGLzSr5QBU3'
+  '/dnsaddr/bootstrap.libp2p.io/p2p/QmbLHAnMoJPWSCR5Zhtx6BHJX9KiKNN6tpvbUcqanj75Nb',
+  '/dnsaddr/bootstrap.libp2p.io/p2p/QmNnooDu7bfjPFoTZYxMNLWUQJyrVwtbZg5gBMjTezGAJN'
 ]
 
-const node = await Libp2p.create({
-  modules: {
-    transport: [WebSockets],
-    connEncryption: [NOISE],
-    streamMuxer: [MPLEX],
-    peerDiscovery: [Bootstrap]
-  },
-  config: {
-    peerDiscovery: {
-      autoDial: true, // Auto connect to discovered peers (limited by ConnectionManager minConnections)
-      // The `tag` property will be searched when creating the instance of your Peer Discovery service.
-      // The associated object, will be passed to the service when it is instantiated.
-      [Bootstrap.tag]: {
-        enabled: true,
-        list: bootstrapMultiaddrs // provide array of multiaddrs
-      }
-    }
+const node = await createLibp2p({
+  transports: [
+    new WebSockets()
+  ],
+  connectionEncryption: [
+    new Noise()
+  ],
+  streamMuxers: [
+    new Mplex()
+  ],
+  peerDiscovery: [
+    new Bootstrap({
+      list: bootstrapMultiaddrs // provide array of multiaddrs
+    })
+  ],
+  connectionManager: {
+    autoDial: true, // Auto connect to discovered peers (limited by ConnectionManager minConnections)
+    // The `tag` property will be searched when creating the instance of your Peer Discovery service.
+    // The associated object, will be passed to the service when it is instantiated.
   }
 })
 

doc/PEER_DISCOVERY.md

@@ -3,7 +3,7 @@
 **Synopsis**:
 * All peers discovered are emitted via `peer:discovery` so applications can take any desired action.
 * Libp2p defaults to automatically connecting to new peers, when under the [ConnectionManager](https://github.com/libp2p/js-libp2p-connection-manager) low watermark (minimum peers).
-  * Applications can disable this via the `peerDiscovery.autoDial` config property, and handle connections themselves.
+  * Applications can disable this via the `connectionManager.autoDial` config property, and handle connections themselves.
   * Applications who have not disabled this should **never** connect on peer discovery. Applications should use the `peer:connect` event if they wish to take a specific action on new peers.
 
 ## Scenarios

doc/STREAMING_ITERABLES.md

@@ -22,8 +22,8 @@
 Sometimes you may need to wrap an existing duplex stream in order to perform incoming and outgoing [transforms](#transform) on data. This type of wrapping is commonly used in stream encryption/decryption. Using [it-pair][it-pair] and [it-pipe][it-pipe], we can do this rather easily, given an existing [duplex iterable](#duplex).
 
 ```js
-const duplexPair = require('it-pair/duplex')
-const pipe = require('it-pipe')
+import { duplexPair } from 'it-pair/duplex'
+import { pipe } from 'it-pipe'
 
 // Wrapper is what we will write and read from
 // This gives us two duplex iterables that are internally connected

doc/migrations/v0.26-v0.27.md

@@ -4,16 +4,18 @@ A migration guide for refactoring your application code from libp2p v0.26.x to v
 
 ## Table of Contents
 
-- [Migrating from callbacks](#migrating-from-callbacks)
-- [Pull Streams to Streaming Iterables](#pull-streams-to-streaming-iterables)
-- [Sample API Migrations](#sample-api-migrations)
-  - [Registering Protocol Handlers](#registering-protocol-handlers)
-  - [Dialing and Sending Data](#dialing-and-sending-data)
-  - [Checking if a peer is connected](#checking-if-a-peer-is-connected)
-  - [Pinging another peer](#pinging-another-peer)
-  - [Pubsub](#pubsub)
-    - [Getting subscribers](#getting-subscribers)
-    - [Getting subscribed topics](#getting-subscribed-topics)
+- [Migrating to the libp2p@0.27 API](#migrating-to-the-libp2p027-api)
+  - [Table of Contents](#table-of-contents)
+  - [Migrating from callbacks](#migrating-from-callbacks)
+  - [Pull Streams to Streaming Iterables](#pull-streams-to-streaming-iterables)
+  - [Sample API Migrations](#sample-api-migrations)
+    - [Registering Protocol Handlers](#registering-protocol-handlers)
+    - [Dialing and Sending Data](#dialing-and-sending-data)
+    - [Checking if a peer is connected](#checking-if-a-peer-is-connected)
+    - [Pinging another peer](#pinging-another-peer)
+    - [Pubsub](#pubsub)
+      - [Getting subscribers](#getting-subscribers)
+      - [Getting subscribed topics](#getting-subscribed-topics)
 
 ## Migrating from callbacks
 

doc/migrations/v0.27-v0.28.md

@@ -16,7 +16,7 @@ A migration guide for refactoring your application code from libp2p v0.27.x to v
 
 In `libp2p@0.27` we integrated the PeerStore (former [peer-book](https://github.com/libp2p/js-peer-book)) into the codebase. By that time, it was not documented in the [API DOC](../API.md) since it kept the same API as the `peer-book` and it was expected to be completelly rewritten in `libp2p@0.28`.
 
-Moving towards a separation of concerns regarding known peers' data, as well as enabling PeerStore persistence, the PeerStore is now divided into four main components: `AddressBook`, `ProtoBook`, `KeyBook` and `MetadataBook`. This resulted in API changes in the PeerStore, since each type of peer data should now be added in an atomic fashion. 
+Moving towards a separation of concerns regarding known peers' data, as well as enabling PeerStore persistence, the PeerStore is now divided into four main components: `AddressBook`, `ProtoBook`, `KeyBook` and `MetadataBook`. This resulted in API changes in the PeerStore, since each type of peer data should now be added in an atomic fashion.
 
 ### Adding a Peer
 
@@ -109,7 +109,7 @@ const peers = libp2p.peerStore.peers
 
 Since this PeerInfo instances were navigating through the entire codebases, some data inconsistencies could be observed in libp2p. Different libp2p subsystems were running with different visions of the known peers data. For instance, a libp2p subsystem receives a copy of this instance with the peer multiaddrs and protocols, but if new data of the peer is obtained from other subsystem, it would not be updated on the former. Moreover, considering that several subsystems were modifying the peer data, libp2p had no way to determine the accurate data.
 
-Considering the complete revamp of the libp2p PeerStore towards its second version, the PeerStore now acts as the single source of truth, we do not need to carry [`PeerInfo`][peer-info] instances around. This also solves all the problems stated above, since subsystems will report new observations to the PeerStore. 
+Considering the complete revamp of the libp2p PeerStore towards its second version, the PeerStore now acts as the single source of truth, we do not need to carry [`PeerInfo`][peer-info] instances around. This also solves all the problems stated above, since subsystems will report new observations to the PeerStore.
 
 ### Create
 
@@ -211,7 +211,7 @@ await libp2p.start()
 
 #### Peer Dialing, Hangup and Ping
 
-`libp2p.dial`, `libp2p.dialProtocol`, `libp2p.hangup` and `libp2p.ping` supported as the target parameter a [`PeerInfo`](peer-info), a [`PeerId`](peer-id), a [`Multiaddr`][multiaddr] and a string representation of the multiaddr. Considering that [`PeerInfo`](peer-info) is being removed from libp2p, all these methods will now support the other 3 possibilities. 
+`libp2p.dial`, `libp2p.dialProtocol`, `libp2p.hangup` and `libp2p.ping` supported as the target parameter a [`PeerInfo`](peer-info), a [`PeerId`](peer-id), a [`Multiaddr`][multiaddr] and a string representation of the multiaddr. Considering that [`PeerInfo`](peer-info) is being removed from libp2p, all these methods will now support the other 3 possibilities.
 
 There is one relevant aspect to consider with this change. When using a [`PeerId`](peer-id), the PeerStore **MUST** have known addresses for that peer in its AddressBook, so that it can perform the request. This was also true in the past, but it is important pointing it out because it might not be enough to switch from using [`PeerInfo`](peer-info) to [`PeerId`](peer-id). When using a [`PeerInfo`](peer-info), the PeerStore was not required to have the multiaddrs when they existed on the PeerInfo instance.
 

doc/migrations/v0.28-v0.29.md

@@ -46,18 +46,18 @@ Publish uses `Uint8Array` data instead of `Buffer`.
 const topic = 'topic'
 const data = Buffer.from('data')
 
-await libp2p.pubsub.publish(topic, data)	
+await libp2p.pubsub.publish(topic, data)
 ```
 
 **After**
 
 ```js
-const uint8ArrayFromString = require('uint8arrays/from-string')
+const uint8ArrayFromString from 'uint8arrays/from-string')
 
 const topic = 'topic'
 const data = uint8ArrayFromString('data')
 
-await libp2p.pubsub.publish(topic, data)	
+await libp2p.pubsub.publish(topic, data)
 ```
 
 #### Subscribe
@@ -79,7 +79,7 @@ libp2p.pubsub.subscribe(topic, handler)
 **After**
 
 ```js
-const uint8ArrayToString = require('uint8arrays/to-string')
+const uint8ArrayToString from 'uint8arrays/to-string')
 
 const topic = 'topic'
 const handler = (msg) => {
@@ -106,7 +106,7 @@ libp2p.pubsub.subscribe(topics, handler)
 **After**
 
 ```js
-const uint8ArrayToString = require('uint8arrays/to-string')
+const uint8ArrayToString from 'uint8arrays/to-string')
 
 const topics = ['a', 'b']
 const handler = (msg) => {
@@ -177,8 +177,8 @@ Aiming to improve libp2p browser support, we are moving away from node core modu
 We use the [uint8arrays](https://www.npmjs.com/package/uint8arrays) utilities module to deal with `Uint8Arrays` easily and we recommend its usage in the application layer. Thanks for the module [@achingbrain](https://github.com/achingbrain)! It includes utilities like `compare`, `concat`, `equals`, `fromString` and `toString`. In this migration examples, we will be using the following:
 
 ```js
-const uint8ArrayFromString = require('uint8arrays/from-string')
-const uint8ArrayToString = require('uint8arrays/to-string')
+const uint8ArrayFromString from 'uint8arrays/from-string')
+const uint8ArrayToString from 'uint8arrays/to-string')
 ```
 
 #### contentRouting.put

doc/migrations/v0.29-v0.30.md

@@ -0,0 +1,189 @@
+<!--Specify versions for migration below-->
+# Migrating to libp2p@30
+
+A migration guide for refactoring your application code from libp2p v0.29.x to v0.30.0.
+
+## Table of Contents
+
+- [Migrating to libp2p@30](#migrating-to-libp2p30)
+  - [Table of Contents](#table-of-contents)
+  - [API](#api)
+    - [Pubsub](#pubsub)
+    - [Addresses](#addresses)
+  - [Development and Testing](#development-and-testing)
+  - [Module Updates](#module-updates)
+
+## API
+
+### Pubsub
+
+`js-libp2p` nodes prior to this version were emitting to self on publish by default.
+This default value was changed on the pubsub router layer in the past, but we kept it overwritten in libp2p to avoid an upstream breaking change.
+Now `js-libp2p` does not overwrite the pubsub router options anymore. Upstream projects that want this feature should enable it on their libp2p configuration.
+
+**Before**
+
+```js
+const Gossipsub from 'libp2p-gossipsub')
+const Libp2p from 'libp2p')
+
+const libp2p = await Libp2p.create({
+  modules: {
+    // ... Add required modules according to the Configuration docs
+    pubsub: Gossipsub
+  }
+})
+```
+
+**After**
+
+```js
+const Gossipsub from 'libp2p-gossipsub')
+const Libp2p from 'libp2p')
+
+const libp2p = await Libp2p.create({
+  modules: {
+    // ... Add required modules according to the Configuration docs
+    pubsub: Gossipsub
+  },
+  config: {
+    pubsub: {
+      emitSelf: true
+    }
+  }
+})
+```
+
+The [Pubsub interface](https://github.com/libp2p/js-libp2p-interfaces/tree/master/src/pubsub) was updated on its message signing properties, taking into account the Gossipsub spec updates on [libp2p/specs#294](https://github.com/libp2p/specs/pull/294) and [libp2p/specs#299](https://github.com/libp2p/specs/pull/299)
+
+The signing property is now based on a `globalSignaturePolicy` option instead of the previous `signMessages` and `strictSigning` options. The default to strict signing pubsub messages was kept, but if you would like to disable it, the properties should be changed as follows:
+
+**Before**
+
+```js
+const Gossipsub from 'libp2p-gossipsub')
+const Libp2p from 'libp2p')
+
+const libp2p = await Libp2p.create({
+  modules: {
+    // ... Add required modules according to the Configuration docs
+    pubsub: Gossipsub
+  },
+  config: {
+    pubsub: {
+      signMessages: false,
+      strictSigning: false
+    }
+  }
+})
+```
+
+**After**
+
+```js
+const Gossipsub from 'libp2p-gossipsub')
+const { SignaturePolicy } from 'libp2p-interfaces/src/pubsub/signature-policy')
+const Libp2p from 'libp2p')
+
+const libp2p = await Libp2p.create({
+  modules: {
+    // ... Add required modules according to the Configuration docs
+    pubsub: Gossipsub
+  },
+  config: {
+    pubsub: {
+      globalSignaturePolicy: SignaturePolicy.StrictNoSign
+    }
+  }
+})
+```
+
+### Addresses
+
+Libp2p has supported `noAnnounce` addresses configuration for some time now. However, it did not provide the best developer experience. In this release, we dropped the `noAnnounce` configuration property in favor of an `announceFilter` property function.
+
+**Before**
+
+```js
+const Libp2p from 'libp2p')
+
+const libp2p = await Libp2p.create({
+  addresses: {
+    listen: ['/ip4/127.0.0.1/tcp/8000/ws'],
+    noAnnounce: ['/ip4/127.0.0.1/tcp/8000/ws'],
+  },
+  // ... additional configuration per the Configuration docs
+})
+```
+
+**After**
+
+```js
+const Libp2p from 'libp2p')
+
+// Libp2p utils has several multiaddr utils you can leverage
+const isPrivate from 'libp2p-utils/src/multiaddr/is-private')
+
+const libp2p = await Libp2p.create({
+  addresses: {
+    listen: ['/ip4/127.0.0.1/tcp/8000/ws'],
+    // Filter function: (ma: Array<multiaddr>) => Array<multiaddr>
+    announceFilter: (multiaddrs) => multiaddrs.filter(m => !isPrivate(m))
+  },
+  // ... additional configuration per the Configuration docs
+})
+```
+
+It is important pointing out another change regarding address advertising. This is not an API breaking change, but it might have influence on your libp2p setup.
+Previously, when using the addresses `announce` property, its multiaddrs were concatenated with the `listen` multiaddrs and then they were filtered out by the `noAnnounce` multiaddrs, in order to create the list of multiaddrs to advertise.
+In `libp2p@0.30` the logic now operates as follows:
+
+- If `announce` addresses are provided, only they will be announced (no filters are applied)
+- If `announce` is not provided, the transport addresses will be filtered (if a filter is provided)
+  - if the `announceFilter` is provide it will be passed the transport addresses
+
+## Development and Testing
+
+While this is not an API breaking change, there was a behavioral breaking change on the Websockets transport when in a browser environment. This change might create issues on local test setups.
+`libp2p-websockets` has allowed `TCP` and `DNS` addresses, both with `ws` or `wss` to be used for dial purposes. Taking into account security (and browser policies), we are now restricting addresses to `DNS` + `wss` in the browser
+With this new behavior, if you need to use non DNS addresses, you can configure your libp2p node as follows:
+
+```js
+const Websockets from 'libp2p-websockets')
+const filters from 'libp2p-websockets/src/filters')
+const Libp2p from 'libp2p')
+
+const transportKey = Websockets.prototype[Symbol.toStringTag]
+const libp2p = await Libp2p.create({
+  modules: {
+    transport: [Websockets]
+    // ... Add required modules according to the Configuration docs
+  },
+  config: {
+    transport: {
+      [transportKey]: {
+        filter: filters.all
+      }
+    }
+  }
+})
+```
+
+## Module Updates
+
+With this release you should update the following libp2p modules if you are relying on them:
+
+<!--Specify module versions in JSON for migration below.
+It's recommended to check package.json changes for this:
+`git diff <release> <prev> -- package.json`
+-->
+
+```json
+"libp2p-delegated-content-routing": "^0.8.0",
+"libp2p-delegated-peer-routing": "^0.8.0",
+"libp2p-floodsub": "^0.24.0",
+"libp2p-gossipsub": "^0.7.0",
+"libp2p-websockets": "^0.15.0",
+```
+
+Note that some of them do not need to be updated for this libp2p version to work as expected, but we suggest you to keep them updated as part of this release.

doc/migrations/v0.30-v0.31.md

@@ -0,0 +1,123 @@
+<!--Specify versions for migration below-->
+# Migrating to libp2p@31
+
+A migration guide for refactoring your application code from libp2p v0.30.x to v0.31.0.
+
+## Table of Contents
+
+- [Types](#types)
+- [API](#api)
+- [Module Updates](#module-updates)
+
+## Types
+
+Most of the type definitions in the libp2p configuration were `any` or were not included before this release. This might cause breaking changes on upstream projects relying on the previous provided types, as well as to libp2p modules implemented by the libp2p community.
+
+## API
+
+### Core API
+
+`libp2p.dialProtocol` does not accept empty or null protocols returning a connection anymore and `dial` must be used instead.
+
+```js
+const connection = await libp2p.dialProtocol(peerId)
+```
+
+**After**
+
+```js
+const connection = await libp2p.dial(peerId)
+```
+
+### Connection Manager Options
+
+We updated the connection manager options naming in `libp2p@0.29` but kept it backward compatible until now.
+
+**Before**
+
+```js
+const node = await Libp2p.create({
+  connectionManager: {
+    minPeers: 0
+  }
+})
+```
+
+**After**
+
+```js
+const node = await Libp2p.create({
+  connectionManager: {
+    minConnections: 0
+  }
+})
+```
+
+You can see full details on how to configure the connection manager [here](https://github.com/libp2p/js-libp2p/blob/master/doc/CONFIGURATION.md#configuring-connection-manager).
+
+### Dialer and Keychain components
+
+Internal property names to create a libp2p `Dialer` and `Keychain` were updated to reflect the properties naming in the libp2p configuration. These are internal modules of libp2p core and should not impact most of the users, but as it is possible to use them separately here follow the changes:
+
+***Before**
+
+```js
+const dialer = new Dialer({
+  transportManager,
+  peerStore,
+  concurrency,
+  perPeerLimit,
+  timeout,
+  resolvers,
+  addressSorter
+})
+
+const keychain = new Keychain(datastore, {
+  passPhrase
+})
+```
+
+**After**
+
+```js
+this.dialer = new Dialer({
+  transportManager,
+  peerStore,
+  maxParallelDials,
+  maxDialsPerPeer,
+  dialTimeout,
+  resolvers,
+  addressSorter
+})
+
+const keychain = new Keychain(datastore, {
+  pass
+})
+```
+
+## Module Updates
+
+With this release you should update the following libp2p modules if you are relying on them:
+
+<!--Specify module versions in JSON for migration below.
+It's recommended to check package.json changes for this:
+`git diff <release> <prev> -- package.json`
+-->
+
+```json
+"libp2p-bootstrap": "^0.12.3",
+"libp2p-crypto": "^0.19.4",
+"libp2p-interfaces": "^0.10.0",
+"libp2p-delegated-content-routing": "^0.10.0",
+"libp2p-delegated-peer-routing": "^0.9.0",
+"libp2p-floodsub": "^0.25.1",
+"libp2p-gossipsub": "^0.9.0",
+"libp2p-kad-dht": "^0.22.0",
+"libp2p-mdns": "^0.16.0",
+"libp2p-noise": "^3.0.0",
+"libp2p-tcp": "^0.15.4",
+"libp2p-webrtc-star": "^0.22.2",
+"libp2p-websockets": "^0.15.6"
+```
+
+One of the main changes in this new release is the update to `multiaddr@9.0.0`. This should also be updated in upstream projects to avoid several multiaddr versions in the bundle and to avoid potential problems when libp2p interacts with provided outdated multiaddr instances.

doc/migrations/v0.31-v0.32.md

@@ -0,0 +1,36 @@
+<!--Specify versions for migration below-->
+# Migrating to libp2p@32
+
+A migration guide for refactoring your application code from libp2p v0.31.x to v0.32.0.
+
+## Table of Contents
+
+- [Module Updates](#module-updates)
+
+## Module Updates
+
+With this release you should update the following libp2p modules if you are relying on them:
+
+<!--Specify module versions in JSON for migration below.
+It's recommended to check package.json changes for this: 
+`git diff <release> <prev> -- package.json`
+-->
+
+```json
+"libp2p-bootstrap": "^0.13.0",
+"libp2p-crypto": "^0.19.4",
+"libp2p-interfaces": "^1.0.0",
+"libp2p-delegated-content-routing": "^0.11.0",
+"libp2p-delegated-peer-routing": "^0.10.0",
+"libp2p-floodsub": "^0.27.0",
+"libp2p-gossipsub": "^0.11.0",
+"libp2p-kad-dht": "^0.23.0",
+"libp2p-mdns": "^0.17.0",
+"libp2p-noise": "^4.0.0",
+"libp2p-tcp": "^0.17.0",
+"libp2p-webrtc-direct": "^0.7.0",
+"libp2p-webrtc-star": "^0.23.0",
+"libp2p-websockets": "^0.16.0"
+```
+
+One of the main changes in this new release is the update to `multiaddr@10.0.0`. This should also be updated in upstream projects to avoid several multiaddr versions in the bundle and to avoid potential problems when libp2p interacts with provided outdated multiaddr instances.

doc/migrations/v0.32-v0.33.md

@@ -0,0 +1,14 @@
+<!--Specify versions for migration below-->
+# Migrating to libp2p@33
+
+A migration guide for refactoring your application code from libp2p v0.32.x to v0.33.0.
+
+## Table of Contents
+
+- [Module Updates](#module-updates)
+
+## Module Updates
+
+Libp2p uses a datastore implementation for Peerstore persistence and for the DHT state. While libp2p defaults to a datastore implementation, it can receive any implementation of a datastore compliant with the [interface-datastore](https://github.com/ipfs/js-ipfs-interfaces/tree/master/packages/interface-datastore) via its configuration.
+
+In this release, we updated to `interface-datastore@6.0.0`. As a result, libp2p users relying on a configured datastore should update it to a compliant implementation for updating libp2p.

doc/migrations/v0.36-v.037.md

@@ -0,0 +1,256 @@
+<!--Specify versions for migration below-->
+# Migrating to libp2p@37 <!-- omit in toc -->
+
+A migration guide for refactoring your application code from libp2p v0.36.x to v0.37.0.
+
+## Table of Contents <!-- omit in toc -->
+
+- [ESM](#esm)
+- [TypeScript](#typescript)
+- [Config](#config)
+- [Bundled modules](#bundled-modules)
+- [Events](#events)
+
+## ESM
+
+The biggest change to `libp2p@0.37.0` is that the module is now [ESM-only](https://gist.github.com/sindresorhus/a39789f98801d908bbc7ff3ecc99d99c).
+
+ESM is the module system for JavaScript, it allows us to structure our code in separate files without polluting a global namespace.
+
+Other systems have tried to fill this gap, notably CommonJS, AMD, RequireJS and others, but ESM is [the official standard format](https://tc39.es/ecma262/#sec-modules) to package JavaScript code for reuse.
+
+## TypeScript
+
+The core `libp2p` module and all supporting modules have now been ported to TypeScript in a complete ground-up rewrite. This will not have a huge impact on most application code, but those that are type-aware, either by being written in TypeScript themselves or using JSDoc comments will notice full type completion and better error message when coding against the libp2p API.
+
+To reflect the updated nature of these modules, all ecosystem modules have been moved to the `@libp2p` org on npm, so `libp2p-tcp` has become `@libp2p/tcp`, `libp2p-mplex` has become `@libp2p/mplex` and so on. `@chainsafe/libp2p-noise` and `libp2p-gossipsub` are unaffected.
+
+## Config
+
+Because libp2p is now fully typed it was necessary to refactor the configuration object passed to the libp2p constructor. The reason being, it previously accepted config objects to pass to the constructors of the various modules - to type those we'd need to know the types of all possible modules in advance which isn't possible.
+
+The following changes have been made to the configuration object:
+
+1. It now takes instances of modules rather than their classes
+2. Keys from the `config` and `modules` objects have been migrated to the root of the object
+3. Use of the `enabled` flag has been removed - if you don't want a particular feature enabled, don't pass a module implementing that feature
+4. Some keys have been renamed = `transport` -> `transports`, `streamMuxer` -> `streamMuxers`, `connEncryption` -> `connectionEncryption`, etc
+5. Keys from `config.dialer` have been moved to `config.connectionManager` as the connection manager is now responsible for managing connections
+
+**Before**
+
+```js
+import Libp2p from 'libp2p'
+import TCP from 'libp2p-tcp'
+import Mplex from 'libp2p-mplex'
+import { NOISE } from '@chainsafe/libp2p-noise'
+import Gossipsub from 'libp2p-gossipsub'
+import KadDHT from 'libp2p-kad-dht'
+import Bootstrap from 'libp2p-bootstrap'
+import MulticastDNS from 'libp2p-mdns'
+
+const node = await Libp2p.create({
+  addresses: {
+    listen: ['/ip4/127.0.0.1/tcp/8000']
+  },
+  modules: {
+    transport: [
+      TCP
+    ],
+    streamMuxer: [
+      Mplex
+    ],
+    connEncryption: [
+      NOISE
+    ],
+    dht: KadDHT,
+    pubsub: Gossipsub,
+    peerDiscovery: [
+      Bootstrap,
+      MulticastDNS
+    ]
+  },
+  config: {
+    peerDiscovery: {
+      autoDial: true,
+      [MulticastDNS.tag]: {
+        interval: 1000,
+        enabled: true
+      },
+      [Bootstrap.tag]: {
+        list: [
+          // .. multiaddrs here
+        ],
+        interval: 2000,
+        enabled: true
+      }
+    },
+    dialer: {
+      dialTimeout: 60000
+    }
+  }
+})
+```
+
+**After**
+
+```js
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import Gossipsub from '@chainsafe/libp2p-gossipsub'
+import { KadDHT } from '@libp2p/kad-dht'
+import { Bootstrap } from '@libp2p/bootstrap'
+import { MulticastDNS } from '@libp2p/mdns'
+
+const node = await createLibp2p({
+  addresses: {
+    listen: ['/ip4/127.0.0.1/tcp/8000']
+  },
+  addressManager: {
+    autoDial: true
+  },
+  connectionManager: {
+    dialTimeout: 60000
+  },
+  transports: [
+    new TCP()
+  ],
+  streamMuxers: [
+    new Mplex()
+  ],
+  connectionEncryption: [
+    new Noise()
+  ],
+  dht: new KadDHT(),
+  pubsub: new Gossipsub(),
+  peerDiscovery: [
+    new Bootstrap({
+      list: [
+        // .. multiaddrs here
+      ],
+      interval: 2000
+    }),
+    new MulticastDNS({
+      interval: 1000
+    })
+  ]
+})
+```
+
+## Bundled modules
+
+Previously you'd have to use deep import paths to get at bundled modules such as the private network module.
+
+Access to these modules is now controlled by the package.json export map so your import paths will need to be updated:
+
+**Before**
+
+```js
+import plaintext from 'libp2p/src/insecure/plaintext.js'
+import Protector from 'libp2p/src/pnet/index.js'
+import generateKey from 'libp2p/src/pnet/key-generator.js'
+import TransportManager from 'libp2p/src/transport-manager.js'
+```
+
+**After**
+
+```js
+import { Plaintext } from 'libp2p/insecure'
+import { PreSharedKeyConnectionProtector, generateKey } from 'libp2p/pnet'
+import { TransportManager } from 'libp2p/transport-manager'
+```
+
+## Events
+
+To reduce our dependency on Node.js internals, use of [EventEmitter](https://nodejs.org/api/events.html#class-eventemitter) has been replaced with the standard [EventTarget](https://developer.mozilla.org/en-US/docs/Web/API/EventTarget).
+
+The EventTarget API is very similar to [HTML DOM Events](https://developer.mozilla.org/en-US/docs/Web/API/Event) used by the browser.
+
+All events are instances of the [CustomEvent](https://developer.mozilla.org/en-US/docs/Web/API/CustomEvent) class. Event-specific information can be accessed via the `.detail` property of the passed event.
+
+They type of event emitted can be inferred from the types for each event emitter.
+
+**Before**
+
+```js
+const handler = (peerInfo) => {
+  //...
+}
+
+// listen for event
+libp2p.on('peer:discovery', handler)
+
+// stop listening for event
+libp2p.removeListener('peer:discovery', handler)
+libp2p.off('peer:discovery', handler)
+```
+
+**After**
+
+```js
+const handler = (event) => {
+  const peerInfo = event.detail
+  //...
+}
+
+// listen for event
+libp2p.addEventListener('peer:discovery', handler)
+
+// stop listening for event
+libp2p.removeEventListener('peer:discovery', handler)
+```
+
+## Pubsub
+
+Similar to the events refactor above, pubsub is now driven by the standard [EventTarget](https://developer.mozilla.org/en-US/docs/Web/API/EventTarget) API.
+
+You can still subscribe to events without a listener with `.subscribe` but all other uses now use the standard API.
+
+Similar to the other events emitted by libp2p the event type is [CustomEvent](https://developer.mozilla.org/en-US/docs/Web/API/CustomEvent). This is part of the js language but at the time of writing Node.js [does not support](https://github.com/nodejs/node/issues/40678) `CustomEvent`, so a polyfill is supplied as part of the `@libp2p/interfaces`
+
+**Before**
+
+```js
+const handler = (message: Message) => {
+  const topic = message.topic
+
+  //...
+}
+
+// listen for event
+libp2p.pubsub.subscribe('my-topic')
+libp2p.pubsub.on('my-topic', handler)
+
+// send event
+libp2p.pubsub.emit('my-topic', Uint8Array.from([0, 1, 2, 3]))
+
+// stop listening for event
+libp2p.unsubscribe('my-topic', handler)
+libp2p.pubsub.off('my-topic', handler)
+```
+
+**After**
+
+```js
+import type { Message } from '@libp2p/interfaces/pubsub'
+
+const handler = (event: CustomEvent<Message>) => {
+  const message = event.detail
+  const topic = message.topic
+
+  //...
+}
+
+// listen for event
+libp2p.pubsub.subscribe('my-topic')
+libp2p.pubsub.addEventListener('message', handler)
+
+// send event
+libp2p.pubsub.publish('my-topic', Uint8Array.from([0, 1, 2, 3]))
+
+// stop listening for event
+libp2p.pubsub.unsubscribe('my-topic')
+libp2p.pubsub.removeEventListener('message', handler)
+```

doc/production/DELEGATE_NODES.md

@@ -0,0 +1,3 @@
+# Delegate Nodes
+
+[TODO](https://github.com/libp2p/js-libp2p/pull/718)

doc/production/README.md

@@ -0,0 +1,65 @@
+# Production
+
+Nowadays, you can run JavaScript code in several different environments, some of them with their own particularities. Moreover, you can use `js-libp2p` for a wide range of use cases. Different environments and different use cases mean different configurations and challenges in the network.
+
+Libp2p nodes can vary from nodes behind an application, to infrastructure nodes that enable the network to operate and to be efficient. In this context, the Libp2p project provides public infrastructure to boost the network, enable nodes connectivity and improve constrained nodes performance. This public infrastructure should be leveraged for learning the concepts and experimenting. When an application on top of libp2p aims to move into production, its own infrastructure should be setup as the public nodes will be intensively used by others and its availability is not guaranteed.
+
+This guide aims to guide you from using the public infrastructure into setting up your own.
+
+## Table of Contents
+
+* [Joining the Network](#joining-the-network)
+* [Connecting to Nodes with connectivity limitations](#connecting-to-nodes-with-connectivity-limitations)
+  * [`webrtc-star` servers](#webrtc-star-servers)
+  * [Circuit Relay](#circuit-relay)
+* [Querying the network from the browser](#querying-the-network-from-the-browser)
+* [Others](#others)
+  * [SSL](#ssl)
+
+## Joining the Network
+
+Once a libp2p node stars, it will need to connect to a set of peers in order to establish its overlay network.
+
+Currently `js-libp2p` is not the best choice for being a bootstrap node. Its DHT needs to be improved, in order to become an effective server to enable other nodes to properly bootstrap their network.
+
+Setting up a fleet of [`go-libp2p`](https://github.com/libp2p/go-libp2p) nodes is the recommended way to proceed here. 
+
+## Connecting to Nodes with connectivity limitations
+
+While the libp2p core codebase aims to work in multiple environments, there are some limitations that are not possible to overcome at the time of writing. These limitations include browser nodes, nodes behind NAT, reverse proxies, firewalls, or lack of compatible transports.
+
+In the browser, libp2p supports two transports: `websockets` and `webrtc-star`. Nowadays, browsers do not support listening for connections, but only to dial known addresses. `webrtc-star` servers can be used to enable libp2p nodes to discover other nodes running on the browser and to help them establish a connection.
+
+For nodes that cannot be dialed (including browser), circuit relay nodes should be used.
+
+### `webrtc-star` servers
+
+Regarding `webRTC` connections, a set of star servers are needed to act as a rendezvous point, where peers can learn about other peers (`peer-discovery`), as well as exchange their SDP offers (signaling data).
+
+You can read on how to setup your own star servers in [libp2p/js-libp2p-webrtc-star/DEPLOYMENT.md](https://github.com/libp2p/js-libp2p-webrtc-star/blob/master/DEPLOYMENT.md).
+
+It is worth pointing out that with new discovery protocols on the way, as well as support for distributed signaling, the star servers should be deprecated on the long run.
+
+### Circuit Relay
+
+Libp2p nodes acting as circuit relay aim to establish connectivity between libp2p nodes (e.g. IPFS nodes) that wouldn't otherwise be able to establish a direct connection to each other.
+
+A relay is needed in situations where nodes are behind NAT, reverse proxies, firewalls and/or simply don't support the same transports (e.g. go-libp2p vs. browser-libp2p). The circuit relay protocol exists to overcome those scenarios. Nodes with the `auto-relay` feature enabled can automatically bind themselves on a relay to listen for connections on their behalf.
+
+You can use [libp2p/js-libp2p-relay-server](https://github.com/libp2p/js-libp2p-relay-server) to setup your own relay server. This also includes an easy to customize Docker setup for a HOP Relay.
+
+## Querying the network from the browser
+
+Libp2p nodes in scenarios such as browser environment and constrained devices will not be an efficient node in the libp2p DHT overlay, as a consequence of their known limitations regarding connectivity and performance.
+
+Aiming to support these type of nodes to find other peers and content in the network, delegate nodes can be setup. With a set of well known IPFS delegate nodes, nodes with limitations in the network can leverage them to perform peer and content routing queries.
+
+Currently, delegate nodes must be IPFS nodes as the IPFS HTTP API is leveraged by them to make routing queries.
+
+You can read on how to setup your own set of delegated nodes in [DELEGATE_NODES.md](./DELEGATE_NODES.md).
+
+## Others
+
+### SSL
+
+TODO

examples/README.md

@@ -8,7 +8,7 @@ Let us know if you find any issues, or if you want to contribute and add a new t
 
 - [Transports](./transports)
 - [Protocol and Stream Muxing](./protocol-and-stream-muxing)
-- [Encrypted Communications](./encrypted-communications)
+- [Connection Encryption](./connection-encryption)
 - [Discovery Mechanisms](./discovery-mechanisms)
 - [Peer and Content Routing](./peer-and-content-routing)
 - [PubSub](./pubsub)

examples/auto-relay/README.md

@@ -0,0 +1,179 @@
+# Auto relay
+
+Auto Relay enables libp2p nodes to dynamically find and bind to relays on the network. Once binding (listening) is done, the node can and should advertise its addresses on the network, allowing any other node to dial it over its bound relay(s).
+While direct connections to nodes are preferable, it's not always possible to do so due to NATs or browser limitations.
+
+## 0. Setup the example
+
+Before moving into the examples, you should run `npm install` on the top level `js-libp2p` folder, in order to install all the dependencies needed for this example. Once the install finishes, you should move into the example folder with `cd examples/auto-relay`.
+
+This example comes with 3 main files. A `relay.js` file to be used in the first step, a `listener.js` file to be used in the second step and a `dialer.js` file to be used on the third step. All of these scripts will run their own libp2p node, which will interact with the previous ones. All nodes must be running in order for you to proceed.
+
+## 1. Set up a relay node
+
+In the first step of this example, we need to configure and run a relay node in order for our target node to bind to for accepting inbound connections.
+
+The relay node will need to have its relay subsystem enabled, as well as its HOP capability. It can be configured as follows:
+
+```js
+import { createLibp2p } from 'libp2p'
+import { WebSockets } from '@libp2p/websockets'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { Mplex } from '@libp2p/mplex'
+
+const node = await createLibp2p({
+  transports: [new WebSockets()],
+  connectionEncryption: [new Noise()],
+  streamMuxers: [new Mplex()]
+  addresses: {
+    listen: ['/ip4/0.0.0.0/tcp/0/ws']
+    // TODO check "What is next?" section
+    // announce: ['/dns4/auto-relay.libp2p.io/tcp/443/wss/p2p/QmWDn2LY8nannvSWJzruUYoLZ4vV83vfCBwd8DipvdgQc3']
+  },
+  relay: {
+    enabled: true,
+    hop: {
+      enabled: true
+    },
+    advertise: {
+      enabled: true,
+    }
+  }
+})
+
+await node.start()
+
+console.log(`Node started with id ${node.peerId.toB58String()}`)
+console.log('Listening on:')
+node.multiaddrs.forEach((ma) => console.log(`${ma.toString()}/p2p/${node.peerId.toB58String()}`))
+```
+
+The Relay HOP advertise functionality is **NOT** required to be enabled. However, if you are interested in advertising on the network that this node is available to be used as a HOP Relay you can enable it. A content router module or Rendezvous needs to be configured to leverage this option.
+
+You should now run the following to start the relay node:
+
+```sh
+node relay.js
+```
+
+This should print out something similar to the following:
+
+```sh
+Node started with id QmWDn2LY8nannvSWJzruUYoLZ4vV83vfCBwd8DipvdgQc3
+Listening on:
+/ip4/127.0.0.1/tcp/61592/ws/p2p/QmWDn2LY8nannvSWJzruUYoLZ4vV83vfCBwd8DipvdgQc3
+/ip4/192.168.1.120/tcp/61592/ws/p2p/QmWDn2LY8nannvSWJzruUYoLZ4vV83vfCBwd8DipvdgQc3
+```
+
+## 2. Set up a listener node with Auto Relay Enabled
+
+One of the typical use cases for Auto Relay is nodes behind a NAT or browser nodes due to their inability to expose a public address. For running a libp2p node that automatically binds itself to connected HOP relays, you can see the following:
+
+```js
+import { createLibp2p } from 'libp2p'
+import { WebSockets } from '@libp2p/websockets'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { Mplex } from '@libp2p/mplex'
+
+const relayAddr = process.argv[2]
+if (!relayAddr) {
+  throw new Error('the relay address needs to be specified as a parameter')
+}
+
+const node = await createLibp2p({
+  transports: [new WebSockets()],
+  connectionEncryption: [new Noise()],
+  streamMuxers: [new Mplex()],
+  relay: {
+    enabled: true,
+    autoRelay: {
+      enabled: true,
+      maxListeners: 2
+    }
+  }
+})
+
+await node.start()
+console.log(`Node started with id ${node.peerId.toB58String()}`)
+
+const conn = await node.dial(relayAddr)
+
+console.log(`Connected to the HOP relay ${conn.remotePeer.toString()}`)
+
+// Wait for connection and relay to be bind for the example purpose
+node.peerStore.on('change:multiaddrs', ({ peerId }) => {
+  // Updated self multiaddrs?
+  if (peerId.equals(node.peerId)) {
+    console.log(`Advertising with a relay address of ${node.multiaddrs[0].toString()}/p2p/${node.peerId.toB58String()}`)
+  }
+})
+```
+
+As you can see in the code, we need to provide the relay address, `relayAddr`, as a process argument. This node will dial the provided relay address and automatically bind to it.
+
+You should now run the following to start the node running Auto Relay:
+
+```sh
+node listener.js /ip4/192.168.1.120/tcp/61592/ws/p2p/QmWDn2LY8nannvSWJzruUYoLZ4vV83vfCBwd8DipvdgQc3
+```
+
+This should print out something similar to the following:
+
+```sh
+Node started with id QmerrWofKF358JE6gv3z74cEAyL7z1KqhuUoVfGEynqjRm
+Connected to the HOP relay QmWDn2LY8nannvSWJzruUYoLZ4vV83vfCBwd8DipvdgQc3
+Advertising with a relay address of /ip4/192.168.1.120/tcp/61592/ws/p2p/QmWDn2LY8nannvSWJzruUYoLZ4vV83vfCBwd8DipvdgQc3/p2p-circuit/p2p/QmerrWofKF358JE6gv3z74cEAyL7z1KqhuUoVfGEynqjRm
+```
+
+Per the address, it is possible to verify that the auto relay node is listening on the circuit relay node address.
+
+Instead of dialing this relay manually, you could set up this node with the Bootstrap module and provide it in the bootstrap list. Moreover, you can use other `peer-discovery` modules to discover peers in the network and the node will automatically bind to the relays that support HOP until reaching the maximum number of listeners.
+
+## 3. Set up a dialer node for testing connectivity
+
+Now that you have a relay node and a node bound to that relay, you can test connecting to the auto relay node via the relay.
+
+```js
+import { createLibp2p } from 'libp2p'
+import { WebSockets } from '@libp2p/websockets'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { Mplex } from '@libp2p/mplex'
+
+const autoRelayNodeAddr = process.argv[2]
+if (!autoRelayNodeAddr) {
+  throw new Error('the auto relay node address needs to be specified')
+}
+
+const node = await createLibp2p({
+  transports: [new WebSockets()],
+  connectionEncryption: [new Noise()],
+  streamMuxers: [new Mplex()]
+})
+
+await node.start()
+console.log(`Node started with id ${node.peerId.toB58String()}`)
+
+const conn = await node.dial(autoRelayNodeAddr)
+console.log(`Connected to the auto relay node via ${conn.remoteAddr.toString()}`)
+```
+
+You should now run the following to start the relay node using the listen address from step 2:
+
+```sh
+node dialer.js /ip4/192.168.1.120/tcp/61592/ws/p2p/QmWDn2LY8nannvSWJzruUYoLZ4vV83vfCBwd8DipvdgQc3
+```
+
+Once you start your test node, it should print out something similar to the following:
+
+```sh
+Node started: Qme7iEzDxFoFhhkrsrkHkMnM11aPYjysaehP4NZeUfVMKG
+Connected to the auto relay node via /ip4/192.168.1.120/tcp/61592/ws/p2p/QmWDn2LY8nannvSWJzruUYoLZ4vV83vfCBwd8DipvdgQc3/p2p-circuit/p2p/QmerrWofKF358JE6gv3z74cEAyL7z1KqhuUoVfGEynqjRm
+```
+
+As you can see from the output, the remote address of the established connection uses the relayed connection.
+
+## 4. What is next?
+
+Before moving into production, there are a few things that you should take into account.
+
+A relay node should not advertise its private address in a real world scenario, as the node would not be reachable by others. You should provide an array of public addresses in the libp2p `addresses.announce` option. If you are using websockets, bear in mind that due to browser’s security policies you cannot establish unencrypted connection from secure context. The simplest solution is to setup SSL with nginx and proxy to the node and setup a domain name for the certificate.

examples/auto-relay/dialer.js

@@ -0,0 +1,31 @@
+import { createLibp2p } from 'libp2p'
+import { WebSockets } from '@libp2p/websockets'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { Mplex } from '@libp2p/mplex'
+
+async function main () {
+  const autoRelayNodeAddr = process.argv[2]
+  if (!autoRelayNodeAddr) {
+    throw new Error('the auto relay node address needs to be specified')
+  }
+
+  const node = await createLibp2p({
+    transports: [
+      new WebSockets()
+    ],
+    connectionEncryption: [
+      new Noise()
+    ],
+    streamMuxers: [
+      new Mplex()
+    ]
+  })
+
+  await node.start()
+  console.log(`Node started with id ${node.peerId.toString()}`)
+
+  const conn = await node.dial(autoRelayNodeAddr)
+  console.log(`Connected to the auto relay node via ${conn.remoteAddr.toString()}`)
+}
+
+main()

examples/auto-relay/listener.js

@@ -0,0 +1,49 @@
+import { createLibp2p } from 'libp2p'
+import { WebSockets } from '@libp2p/websockets'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { Mplex } from '@libp2p/mplex'
+
+async function main () {
+  const relayAddr = process.argv[2]
+  if (!relayAddr) {
+    throw new Error('the relay address needs to be specified as a parameter')
+  }
+
+  const node = await createLibp2p({
+    transports: [
+      new WebSockets()
+    ],
+    connectionEncryption: [
+      new Noise()
+    ],
+    streamMuxers: [
+      new Mplex()
+    ],
+    relay: {
+      enabled: true,
+      autoRelay: {
+        enabled: true,
+        maxListeners: 2
+      }
+    }
+  })
+
+  await node.start()
+  console.log(`Node started with id ${node.peerId.toString()}`)
+
+  const conn = await node.dial(relayAddr)
+
+  console.log(`Connected to the HOP relay ${conn.remotePeer.toString()}`)
+
+  // Wait for connection and relay to be bind for the example purpose
+  node.peerStore.addEventListener('change:multiaddrs', (evt) => {
+    const { peerId } = evt.detail
+
+    // Updated self multiaddrs?
+    if (peerId.equals(node.peerId)) {
+      console.log(`Advertising with a relay address of ${node.getMultiaddrs()[0].toString()}`)
+    }
+  })
+}
+
+main()

examples/auto-relay/relay.js

@@ -0,0 +1,40 @@
+import { createLibp2p } from 'libp2p'
+import { WebSockets } from '@libp2p/websockets'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { Mplex } from '@libp2p/mplex'
+
+async function main () {
+  const node = await createLibp2p({
+    addresses: {
+      listen: ['/ip4/0.0.0.0/tcp/0/ws']
+      // TODO check "What is next?" section
+      // announce: ['/dns4/auto-relay.libp2p.io/tcp/443/wss/p2p/QmWDn2LY8nannvSWJzruUYoLZ4vV83vfCBwd8DipvdgQc3']
+    },
+    transports: [
+      new WebSockets()
+    ],
+    connectionEncryption: [
+      new Noise()
+    ],
+    streamMuxers: [
+      new Mplex()
+    ],
+    relay: {
+      enabled: true,
+      hop: {
+        enabled: true
+      },
+      advertise: {
+        enabled: true,
+      }
+    }
+  })
+
+  await node.start()
+
+  console.log(`Node started with id ${node.peerId.toString()}`)
+  console.log('Listening on:')
+  node.getMultiaddrs().forEach((ma) => console.log(ma.toString()))
+}
+
+main()

examples/auto-relay/test.js

@@ -0,0 +1,93 @@
+import path from 'path'
+import execa from 'execa'
+import pDefer from 'p-defer'
+import { toString as uint8ArrayToString } from 'uint8arrays/to-string'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+function startProcess (name, args = []) {
+  return execa('node', [path.join(__dirname, name), ...args], {
+    cwd: path.resolve(__dirname),
+    all: true
+  })
+}
+
+export async function test () {
+  let output1 = ''
+  let output2 = ''
+  let output3 = ''
+  let relayAddr
+  let autoRelayAddr
+
+  const proc1Ready = pDefer()
+  const proc2Ready = pDefer()
+
+  // Step 1 process
+  process.stdout.write('relay.js\n')
+
+  const proc1 = startProcess('relay.js')
+  proc1.all.on('data', async (data) => {
+    process.stdout.write(data)
+
+    output1 += uint8ArrayToString(data)
+
+    if (output1.includes('Listening on:') && output1.includes('/p2p/')) {
+      relayAddr = output1.trim().split('Listening on:\n')[1].split('\n')[0]
+      proc1Ready.resolve()
+    }
+  })
+
+  await proc1Ready.promise
+  process.stdout.write('==================================================================\n')
+
+  // Step 2 process
+  process.stdout.write('listener.js\n')
+
+  const proc2 = startProcess('listener.js', [relayAddr])
+  proc2.all.on('data', async (data) => {
+    process.stdout.write(data)
+
+    output2 += uint8ArrayToString(data)
+
+    if (output2.includes('Advertising with a relay address of') && output2.includes('/p2p/')) {
+      autoRelayAddr = output2.trim().split('Advertising with a relay address of ')[1].trim()
+      proc2Ready.resolve()
+    }
+  })
+
+  await proc2Ready.promise
+  process.stdout.write('==================================================================\n')
+
+  // Step 3 process
+  process.stdout.write('dialer.js\n')
+
+  const proc3 = startProcess('dialer.js', [autoRelayAddr])
+  proc3.all.on('data', async (data) => {
+    process.stdout.write(data)
+
+    output3 += uint8ArrayToString(data)
+
+    if (output3.includes('Connected to the auto relay node via')) {
+      const remoteAddr = output3.trim().split('Connected to the auto relay node via ')[1]
+
+      if (remoteAddr === autoRelayAddr) {
+        proc3.kill()
+        proc2.kill()
+        proc1.kill()
+      } else {
+        throw new Error('dialer did not dial through the relay')
+      }
+    }
+  })
+
+  await Promise.all([
+    proc1,
+    proc2,
+    proc3
+  ]).catch((err) => {
+    if (err.signal !== 'SIGTERM') {
+      throw err
+    }
+  })
+}

examples/chat/src/dialer.js

@@ -1,19 +1,20 @@
-'use strict'
 /* eslint-disable no-console */
 
-const PeerId = require('peer-id')
-const multiaddr = require('multiaddr')
-const Node = require('./libp2p-bundle')
-const { stdinToStream, streamToConsole } = require('./stream')
+import { Multiaddr } from '@multiformats/multiaddr'
+import { createLibp2p } from './libp2p.js'
+import { stdinToStream, streamToConsole } from './stream.js'
+import { createFromJSON } from '@libp2p/peer-id-factory'
+import peerIdDialerJson from './peer-id-dialer.js'
+import peerIdListenerJson from './peer-id-listener.js'
 
-async function run() {
+async function run () {
   const [idDialer, idListener] = await Promise.all([
-    PeerId.createFromJSON(require('./peer-id-dialer')),
-    PeerId.createFromJSON(require('./peer-id-listener'))
+    createFromJSON(peerIdDialerJson),
+    createFromJSON(peerIdListenerJson)
   ])
 
   // Create a new libp2p node on localhost with a randomly chosen port
-  const nodeDialer = new Node({
+  const nodeDialer = await createLibp2p({
     peerId: idDialer,
     addresses: {
       listen: ['/ip4/0.0.0.0/tcp/0']
@@ -25,12 +26,12 @@ async function run() {
 
   // Output this node's address
   console.log('Dialer ready, listening on:')
-  nodeDialer.multiaddrs.forEach((ma) => {
-    console.log(ma.toString() + '/p2p/' + idDialer.toB58String())
+  nodeDialer.getMultiaddrs().forEach((ma) => {
+    console.log(ma.toString())
   })
 
   // Dial to the remote peer (the "listener")
-  const listenerMa = multiaddr(`/ip4/127.0.0.1/tcp/10333/p2p/${idListener.toB58String()}`)
+  const listenerMa = new Multiaddr(`/ip4/127.0.0.1/tcp/10333/p2p/${idListener.toString()}`)
   const { stream } = await nodeDialer.dialProtocol(listenerMa, '/chat/1.0.0')
 
   console.log('Dialer dialed to listener on protocol: /chat/1.0.0')

examples/chat/src/libp2p-bundle.js

@@ -1,27 +0,0 @@
-'use strict'
-
-const TCP = require('libp2p-tcp')
-const WS = require('libp2p-websockets')
-const mplex = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-const defaultsDeep = require('@nodeutils/defaults-deep')
-const libp2p = require('../../..')
-
-class Node extends libp2p {
-  constructor (_options) {
-    const defaults = {
-      modules: {
-        transport: [
-          TCP,
-          WS
-        ],
-        streamMuxer: [ mplex ],
-        connEncryption: [ NOISE ]
-      }
-    }
-
-    super(defaultsDeep(_options, defaults))
-  }
-}
-
-module.exports = Node

examples/chat/src/libp2p.js

@@ -0,0 +1,23 @@
+import { TCP } from '@libp2p/tcp'
+import { WebSockets } from '@libp2p/websockets'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import defaultsDeep from '@nodeutils/defaults-deep'
+import { createLibp2p as create } from 'libp2p'
+
+export async function createLibp2p(_options) {
+  const defaults = {
+    transports: [
+      new TCP(),
+      new WebSockets()
+    ],
+    streamMuxers: [
+      new Mplex()
+    ],
+    connectionEncryption: [
+      new Noise()
+    ]
+  }
+
+  return create(defaultsDeep(_options, defaults))
+}

examples/chat/src/listener.js

@@ -1,14 +1,14 @@
-'use strict'
 /* eslint-disable no-console */
 
-const PeerId = require('peer-id')
-const Node = require('./libp2p-bundle.js')
-const { stdinToStream, streamToConsole } = require('./stream')
+import { createLibp2p } from './libp2p.js'
+import { stdinToStream, streamToConsole } from './stream.js'
+import { createFromJSON } from '@libp2p/peer-id-factory'
+import peerIdListenerJson from './peer-id-listener.js'
 
-async function run() {
+async function run () {
   // Create a new libp2p node with the given multi-address
-  const idListener = await PeerId.createFromJSON(require('./peer-id-listener'))
-  const nodeListener = new Node({
+  const idListener = await createFromJSON(peerIdListenerJson)
+  const nodeListener = await createLibp2p({
     peerId: idListener,
     addresses: {
       listen: ['/ip4/0.0.0.0/tcp/10333']
@@ -16,8 +16,9 @@ async function run() {
   })
 
   // Log a message when a remote peer connects to us
-  nodeListener.connectionManager.on('peer:connect', (connection) => {
-    console.log('connected to: ', connection.remotePeer.toB58String())
+  nodeListener.connectionManager.addEventListener('peer:connect', (evt) => {
+    const connection = evt.detail
+    console.log('connected to: ', connection.remotePeer.toString())
   })
 
   // Handle messages for the protocol
@@ -33,8 +34,8 @@ async function run() {
 
   // Output listen addresses to the console
   console.log('Listener ready, listening on:')
-  nodeListener.multiaddrs.forEach((ma) => {
-    console.log(ma.toString() + '/p2p/' + idListener.toB58String())
+  nodeListener.getMultiaddrs().forEach((ma) => {
+    console.log(ma.toString())
   })
 }
 

examples/chat/src/peer-id-dialer.js

@@ -1,4 +1,4 @@
-{
+export default {
   "id": "Qma3GsJmB47xYuyahPZPSadh1avvxfyYQwk8R3UnFrQ6aP",
   "privKey": "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",
   "pubKey": "CAASpgIwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCaNSDOjPz6T8HZsf7LDpxiQRiN2OjeyIHUS05p8QWOr3EFUCFsC31R4moihE5HN+FxNalUyyFZU//yjf1pdnlMJqrVByJSMa+y2y4x2FucpoCAO97Tx+iWzwlZ2UXEUXM1Y81mhPbeWXy+wP2xElTgIER0Tsn/thoA0SD2u9wJuVvM7dB7cBcHYmqV6JH+KWCedRTum6O1BssqP/4Lbm2+rkrbZ4+oVRoU2DRLoFhKqwqLtylrbuj4XOI3XykMXV5+uQXz1JzubNOB9lsc6K+eRC+w8hhhDuFMgzkZ4qomCnx3uhO67KaICd8yqqBa6PJ/+fBM5Xk4hjyR40bwcf41AgMBAAE="

examples/chat/src/peer-id-listener.js

@@ -1,4 +1,4 @@
-{
+export default {
   "id": "QmcrQZ6RJdpYuGvZqD5QEHAv6qX4BrQLJLQPQUrTrzdcgm",
   "privKey": "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",
   "pubKey": "CAASpgIwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDLZZcGcbe4urMBVlcHgN0fpBymY+xcr14ewvamG70QZODJ1h9sljlExZ7byLiqRB3SjGbfpZ1FweznwNxWtWpjHkQjTVXeoM4EEgDSNO/Cg7KNlU0EJvgPJXeEPycAZX9qASbVJ6EECQ40VR/7+SuSqsdL1hrmG1phpIju+D64gLyWpw9WEALfzMpH5I/KvdYDW3N4g6zOD2mZNp5y1gHeXINHWzMF596O72/6cxwyiXV1eJ000k1NVnUyrPjXtqWdVLRk5IU1LFpoQoXZU5X1hKj1a2qt/lZfH5eOrF/ramHcwhrYYw1txf8JHXWO/bbNnyemTHAvutZpTNrsWATfAgMBAAE="

examples/chat/src/stream.js

@@ -1,15 +1,19 @@
-'use strict'
 /* eslint-disable no-console */
 
-const pipe = require('it-pipe')
-const lp = require('it-length-prefixed')
+import { pipe } from 'it-pipe'
+import * as lp from 'it-length-prefixed'
+import map from 'it-map'
+import { fromString as uint8ArrayFromString } from 'uint8arrays/from-string'
+import { toString as uint8ArrayToString } from 'uint8arrays/to-string'
 
-function stdinToStream(stream) {
+export function stdinToStream(stream) {
   // Read utf-8 from stdin
   process.stdin.setEncoding('utf8')
   pipe(
     // Read from stdin (the source)
     process.stdin,
+    // Turn strings into buffers
+    (source) => map(source, (string) => uint8ArrayFromString(string)),
     // Encode with length prefix (so receiving side knows how much data is coming)
     lp.encode(),
     // Write to the stream (the sink)
@@ -17,12 +21,14 @@ function stdinToStream(stream) {
   )
 }
 
-function streamToConsole(stream) {
+export function streamToConsole(stream) {
   pipe(
     // Read from the stream (the source)
     stream.source,
     // Decode length-prefixed data
     lp.decode(),
+    // Turn buffers into strings
+    (source) => map(source, (buf) => uint8ArrayToString(buf)),
     // Sink function
     async function (source) {
       // For each chunk of data
@@ -33,8 +39,3 @@ function streamToConsole(stream) {
     }
   )
 }
-
-module.exports = {
-  stdinToStream,
-  streamToConsole
-}

examples/chat/test.js

@@ -0,0 +1,76 @@
+import path from 'path'
+import execa from 'execa'
+import pDefer from 'p-defer'
+import { toString as uint8ArrayToString } from 'uint8arrays/to-string'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+function startProcess(name) {
+  return execa('node', [path.join(__dirname, name)], {
+    cwd: path.resolve(__dirname),
+    all: true
+  })
+}
+
+export async function test () {
+  const message = 'test message'
+  let listenerOutput = ''
+  let dialerOutput = ''
+
+  let isListening = false
+  let messageSent = false
+  const listenerReady = pDefer()
+  const dialerReady = pDefer()
+  const messageReceived = pDefer()
+
+  // Step 1 process
+  process.stdout.write('node listener.js\n')
+  const listenerProc = startProcess('src/listener.js')
+  listenerProc.all.on('data', async (data) => {
+    process.stdout.write(data)
+
+    listenerOutput += uint8ArrayToString(data)
+
+    if (!isListening && listenerOutput.includes('Listener ready, listening on')) {
+      listenerReady.resolve()
+      isListening = true
+    } else if (isListening && listenerOutput.includes(message)) {
+      messageReceived.resolve()
+    }
+  })
+
+  await listenerReady.promise
+  process.stdout.write('==================================================================\n')
+
+  // Step 2 process
+  process.stdout.write('node dialer.js\n')
+  const dialerProc = startProcess('src/dialer.js')
+  dialerProc.all.on('data', async (data) => {
+    process.stdout.write(data)
+    dialerOutput += uint8ArrayToString(data)
+
+    if (!messageSent && dialerOutput.includes('Type a message and see what happens')) {
+      dialerReady.resolve()
+      dialerProc.stdin.write(message)
+      dialerProc.stdin.write('\n')
+      messageSent = true
+    }
+  })
+
+  await dialerReady.promise
+  process.stdout.write('==================================================================\n')
+  await messageReceived.promise
+  process.stdout.write('chat message received\n')
+
+  listenerProc.kill()
+  dialerProc.kill()
+  await Promise.all([
+    listenerProc,
+    dialerProc
+  ]).catch((err) => {
+    if (err.signal !== 'SIGTERM') {
+      throw err
+    }
+  })
+}

examples/connection-encryption/1.js

@@ -0,0 +1,49 @@
+import { createLibp2p } from '../../dist/src/index.js'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { pipe } from 'it-pipe'
+import { toString as uint8ArrayToString } from 'uint8arrays/to-string'
+import { fromString as uint8ArrayFromString } from 'uint8arrays/from-string'
+
+const createNode = async () => {
+  const node = await createLibp2p({
+    addresses: {
+      listen: ['/ip4/0.0.0.0/tcp/0']
+    },
+    transports: [new TCP()],
+    streamMuxers: [new Mplex()],
+    connectionEncryption: [new Noise()]
+  })
+
+  await node.start()
+
+  return node
+}
+
+;(async () => {
+  const [node1, node2] = await Promise.all([
+    createNode(),
+    createNode()
+  ])
+
+  await node1.peerStore.addressBook.set(node2.peerId, node2.getMultiaddrs())
+
+  node2.handle('/a-protocol', ({ stream }) => {
+    pipe(
+      stream,
+      async function (source) {
+        for await (const msg of source) {
+          console.log(uint8ArrayToString(msg))
+        }
+      }
+    )
+  })
+
+  const { stream } = await node1.dialProtocol(node2.peerId, '/a-protocol')
+
+  await pipe(
+    [uint8ArrayFromString('This information is sent out encrypted to the other peer')],
+    stream
+  )
+})();

examples/connection-encryption/README.md

@@ -1,4 +1,4 @@
-# Encrypted Communications
+# Connection Encryption
 
 libp2p can leverage the encrypted communications from the transports it uses (i.e WebRTC). To ensure that every connection is encrypted, independently of how it was set up, libp2p also supports a set of modules that encrypt every communication established.
 
@@ -8,22 +8,22 @@ A byproduct of having these encrypted communications modules is that we can auth
 
 # 1. Set up encrypted communications
 
-We will build this example on top of example for [Protocol and Stream Multiplexing](../protocol-and-stream-multiplexing). You will need the `libp2p-noise` module to complete it, go ahead and `npm install libp2p-noise`.
+We will build this example on top of example for [Protocol and Stream Multiplexing](../protocol-and-stream-multiplexing). You will need the `@chainsafe/libp2p-noise` module to complete it, go ahead and `npm install @chainsafe/libp2p-noise`.
 
 To add them to your libp2p configuration, all you have to do is:
 
 ```JavaScript
-const Libp2p = require('libp2p')
-const { NOISE } = require('libp2p-noise')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
 
-const createNode = () => {
-  return Libp2p.create({
-    modules: {
-      transport: [ TCP ],
-      streamMuxer: [ Mplex ],
-      // Attach noise as the crypto channel to use
-      connEncryption: [ NOISE ]
-    }
+const createNode = async () => {
+  return await createLibp2p({
+    transports: [ new TCP() ],
+    streamMuxers: [ new Mplex() ],
+    // Attach noise as the crypto channel to use
+    conectionEncrypters: [ new Noise() ]
   })
 }
 ```

examples/connection-encryption/test.js

@@ -0,0 +1,14 @@
+
+import path from 'path'
+import { waitForOutput } from '../utils.js'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+export async function test () {
+  process.stdout.write('1.js\n')
+
+  await waitForOutput('This information is sent out encrypted to the other peer', 'node', [path.join(__dirname, '1.js')], {
+    cwd: __dirname
+  })
+}

examples/delegated-routing/package.json

@@ -3,19 +3,18 @@
   "version": "0.1.0",
   "private": true,
   "dependencies": {
-    "ipfs": "~0.34.4",
-    "libp2p": "github:libp2p/js-libp2p#master",
-    "libp2p-delegated-content-routing": "~0.2.2",
-    "libp2p-delegated-peer-routing": "~0.2.2",
-    "libp2p-kad-dht": "~0.14.12",
-    "libp2p-mplex": "~0.8.5",
-    "libp2p-secio": "~0.11.1",
-    "libp2p-webrtc-star": "~0.15.8",
-    "libp2p-websocket-star": "~0.10.2",
-    "libp2p-websockets": "~0.12.2",
-    "react": "^16.8.6",
-    "react-dom": "^16.8.6",
-    "react-scripts": "2.1.8"
+    "@chainsafe/libp2p-noise": "^6.1.1",
+    "ipfs-core": "^0.14.1",
+    "libp2p": "../../",
+    "@libp2p/delegated-content-routing": "^1.0.1",
+    "@libp2p/delegated-peer-routing": "^1.0.1",
+    "@libp2p/kad-dht": "^1.0.9",
+    "@libp2p/mplex": "^1.0.4",
+    "@libp2p/webrtc-star": "^1.0.8",
+    "@libp2p/websockets": "^1.0.7",
+    "react": "^17.0.2",
+    "react-dom": "^17.0.2",
+    "react-scripts": "5.0.0"
   },
   "scripts": {
     "start": "react-scripts start"

examples/delegated-routing/src/App.js

@@ -2,7 +2,7 @@
 'use strict'
 
 import React from 'react'
-import Ipfs from 'ipfs'
+import Ipfs from 'ipfs-core'
 import libp2pBundle from './libp2p-bundle'
 const Component = React.Component
 
@@ -70,7 +70,7 @@ class App extends Component {
   }
 
   componentDidMount () {
-    window.ipfs = this.ipfs = new Ipfs({
+    window.ipfs = this.ipfs = Ipfs.create({
       config: {
         Addresses: {
           Swarm: []

examples/delegated-routing/src/libp2p-bundle.js

@@ -1,26 +1,23 @@
 // eslint-disable-next-line
 'use strict'
 
-const Libp2p = require('libp2p')
-const Websockets = require('libp2p-websockets')
-const WebSocketStar = require('libp2p-websocket-star')
-const WebRTCStar = require('libp2p-webrtc-star')
-const MPLEX = require('libp2p-mplex')
-const SECIO = require('libp2p-secio')
-const KadDHT = require('libp2p-kad-dht')
-const DelegatedPeerRouter = require('libp2p-delegated-peer-routing')
-const DelegatedContentRouter = require('libp2p-delegated-content-routing')
+import { createLibp2p } from 'libp2p'
+import { WebSockets } from '@libp2p/websockets'
+import { WebRTCStar } from '@libp2p/webrtc-star'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { DelegatedPeerRouting } from '@libp2p/delegated-peer-routing'
+import { DelegatedContentRouting } from '@libp2p/delegated-content-routing'
 
 export default function Libp2pBundle ({peerInfo, peerBook}) {
-  const wrtcstar = new WebRTCStar({id: peerInfo.id})
-  const wsstar = new WebSocketStar({id: peerInfo.id})
+  const wrtcstar = new WebRTCStar()
   const delegatedApiOptions = {
     host: '0.0.0.0',
     protocol: 'http',
     port: '8080'
   }
 
-  return new Libp2p({
+  return createLibp2p({
     peerInfo,
     peerBook,
     // Lets limit the connection managers peers and have it check peer health less frequently
@@ -28,48 +25,29 @@ export default function Libp2pBundle ({peerInfo, peerBook}) {
       maxPeers: 10,
       pollInterval: 5000
     },
-    modules: {
-      contentRouting: [
-        new DelegatedContentRouter(peerInfo.id, delegatedApiOptions)
-      ],
-      peerRouting: [
-        new DelegatedPeerRouter(delegatedApiOptions)
-      ],
-      peerDiscovery: [
-        wrtcstar.discovery,
-        wsstar.discovery
-      ],
-      transport: [
-        wrtcstar,
-        wsstar,
-        Websockets
-      ],
-      streamMuxer: [
-        MPLEX
-      ],
-      connEncryption: [
-        SECIO
-      ],
-      dht: KadDHT
+    contentRouting: [
+      new DelegatedPeerRouting(peerInfo.id, delegatedApiOptions)
+    ],
+    peerRouting: [
+      new DelegatedContentRouting(delegatedApiOptions)
+    ],
+    transports: [
+      wrtcstar,
+      new WebSockets()
+    ],
+    streamMuxers: [
+      new Mplex()
+    ],
+    connectionEncryption: [
+      new Noise()
+    ],
+    connectionManager: {
+      autoDial: false
     },
-    config: {
-      peerDiscovery: {
-        autoDial: false,
-        webrtcStar: {
-          enabled: false
-        },
-        websocketStar: {
-          enabled: false
-        }
-      },
-      dht: {
+    relay: {
+      enabled: true,
+      hop: {
         enabled: false
-      },
-      relay: {
-        enabled: true,
-        hop: {
-          enabled: false
-        }
       }
     }
   })

examples/discovery-mechanisms/1.js

@@ -1,54 +1,37 @@
 /* eslint-disable no-console */
-'use strict'
 
-const Libp2p = require('../../')
-const TCP = require('libp2p-tcp')
-const Mplex = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-const Bootstrap = require('libp2p-bootstrap')
-
-// Find this list at: https://github.com/ipfs/js-ipfs/blob/master/src/core/runtime/config-nodejs.json
-const bootstrapers = [
-  '/ip4/104.131.131.82/tcp/4001/p2p/QmaCpDMGvV2BGHeYERUEnRQAwe3N8SzbUtfsmvsqQLuvuJ',
-  '/ip4/104.236.176.52/tcp/4001/p2p/QmSoLnSGccFuZQJzRadHn95W2CrSFmZuTdDWP8HXaHca9z',
-  '/ip4/104.236.179.241/tcp/4001/p2p/QmSoLPppuBtQSGwKDZT2M73ULpjvfd3aZ6ha4oFGL1KrGM',
-  '/ip4/162.243.248.213/tcp/4001/p2p/QmSoLueR4xBeUbY9WZ9xGUUxunbKWcrNFTDAadQJmocnWm',
-  '/ip4/128.199.219.111/tcp/4001/p2p/QmSoLSafTMBsPKadTEgaXctDQVcqN88CNLHXMkTNwMKPnu',
-  '/ip4/104.236.76.40/tcp/4001/p2p/QmSoLV4Bbm51jM9C4gDYZQ9Cy3U6aXMJDAbzgu2fzaDs64',
-  '/ip4/178.62.158.247/tcp/4001/p2p/QmSoLer265NRgSp2LA3dPaeykiS1J6DifTC88f5uVQKNAd',
-  '/ip4/178.62.61.185/tcp/4001/p2p/QmSoLMeWqB7YGVLJN3pNLQpmmEk35v6wYtsMGLzSr5QBU3',
-  '/ip4/104.236.151.122/tcp/4001/p2p/QmSoLju6m7xTh3DuokvT3886QRYqxAzb1kShaanJgW36yx'
-]
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { Bootstrap } from '@libp2p/bootstrap'
+import bootstrapers from './bootstrappers.js'
 
 ;(async () => {
-  const node = await Libp2p.create({
+  const node = await createLibp2p({
     addresses: {
       listen: ['/ip4/0.0.0.0/tcp/0']
     },
-    modules: {
-      transport: [TCP],
-      streamMuxer: [Mplex],
-      connEncryption: [NOISE],
-      peerDiscovery: [Bootstrap]
-    },
-    config: {
-      peerDiscovery: {
-        bootstrap: {
-          interval: 60e3,
-          enabled: true,
-          list: bootstrapers
-        }
-      }
-    }
+    transports: [new TCP()],
+    streamMuxers: [new Mplex()],
+    connectionEncryption: [new Noise()],
+    peerDiscovery: [
+      new Bootstrap({
+        interval: 60e3,
+        list: bootstrapers
+      })
+    ]
   })
 
-  node.connectionManager.on('peer:connect', (connection) => {
-    console.log('Connection established to:', connection.remotePeer.toB58String())	// Emitted when a peer has been found
+  node.connectionManager.addEventListener('peer:connect', (evt) => {
+    const connection = evt.detail
+    console.log('Connection established to:', connection.remotePeer.toString())	// Emitted when a peer has been found
   })
 
-  node.on('peer:discovery', (peerId) => {
+  node.addEventListener('peer:discovery', (evt) => {
+    const peer = evt.detail
     // No need to dial, autoDial is on
-    console.log('Discovered:', peerId.toB58String())
+    console.log('Discovered:', peer.id.toString())
   })
 
   await node.start()

examples/discovery-mechanisms/2.js

@@ -1,31 +1,30 @@
 /* eslint-disable no-console */
-'use strict'
 
-const Libp2p = require('../../')
-const TCP = require('libp2p-tcp')
-const Mplex = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-const MulticastDNS = require('libp2p-mdns')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { MulticastDNS } from '@libp2p/mdns'
 
 const createNode = async () => {
-  const node = await Libp2p.create({
+  const node = await createLibp2p({
     addresses: {
       listen: ['/ip4/0.0.0.0/tcp/0']
     },
-    modules: {
-      transport: [TCP],
-      streamMuxer: [Mplex],
-      connEncryption: [NOISE],
-      peerDiscovery: [MulticastDNS]
-    },
-    config: {
-      peerDiscovery: {
-        [MulticastDNS.tag]: {
-          interval: 20e3,
-          enabled: true
-        }
-      }
-    }
+    transports: [
+      new TCP()
+    ],
+    streamMuxers: [
+      new Mplex()
+    ],
+    connectionEncryption: [
+      new Noise()
+    ],
+    peerDiscovery: [
+      new MulticastDNS({
+        interval: 20e3
+      })
+    ]
   })
 
   return node
@@ -37,8 +36,8 @@ const createNode = async () => {
     createNode()
   ])
 
-  node1.on('peer:discovery', (peerId) => console.log('Discovered:', peerId.toB58String()))
-  node2.on('peer:discovery', (peerId) => console.log('Discovered:', peerId.toB58String()))
+  node1.addEventListener('peer:discovery', (evt) => console.log('Discovered:', evt.detail.id.toString()))
+  node2.addEventListener('peer:discovery', (evt) => console.log('Discovered:', evt.detail.id.toString()))
 
   await Promise.all([
     node1.start(),

examples/discovery-mechanisms/3.js

@@ -0,0 +1,80 @@
+/* eslint-disable no-console */
+
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { FloodSub } from '@libp2p/floodsub'
+import { Bootstrap } from '@libp2p/bootstrap'
+import { PubSubPeerDiscovery } from '@libp2p/pubsub-peer-discovery'
+
+const createNode = async (bootstrappers) => {
+  const node = await createLibp2p({
+    addresses: {
+      listen: ['/ip4/0.0.0.0/tcp/0']
+    },
+    transports: [new TCP()],
+    streamMuxers: [new Mplex()],
+    connectionEncryption: [new Noise()],
+    pubsub: new FloodSub(),
+    peerDiscovery: [
+      new Bootstrap({
+        list: bootstrappers
+      }),
+      new PubSubPeerDiscovery({
+        interval: 1000
+      })
+    ]
+  })
+
+  return node
+}
+
+;(async () => {
+  const relay = await createLibp2p({
+    addresses: {
+      listen: [
+        '/ip4/0.0.0.0/tcp/0'
+      ]
+    },
+    transports: [new TCP()],
+    streamMuxers: [new Mplex()],
+    connectionEncryption: [new Noise()],
+    pubsub: new FloodSub(),
+    peerDiscovery: [
+      new PubSubPeerDiscovery({
+        interval: 1000
+      })
+    ],
+    relay: {
+      enabled: true, // Allows you to dial and accept relayed connections. Does not make you a relay.
+      hop: {
+        enabled: true // Allows you to be a relay for other peers
+      }
+    }
+  })
+  console.log(`libp2p relay starting with id: ${relay.peerId.toString()}`)
+  await relay.start()
+
+  const relayMultiaddrs = relay.getMultiaddrs().map((m) => m.toString())
+
+  const [node1, node2] = await Promise.all([
+    createNode(relayMultiaddrs),
+    createNode(relayMultiaddrs)
+  ])
+
+  node1.addEventListener('peer:discovery', (evt) => {
+    const peer = evt.detail
+    console.log(`Peer ${node1.peerId.toString()} discovered: ${peer.id.toString()}`)
+  })
+  node2.addEventListener('peer:discovery',(evt) => {
+    const peer = evt.detail
+    console.log(`Peer ${node2.peerId.toString()} discovered: ${peer.id.toString()}`)
+  })
+
+  ;[node1, node2].forEach((node, index) => console.log(`Node ${index} starting with id: ${node.peerId.toString()}`))
+  await Promise.all([
+    node1.start(),
+    node2.start()
+  ])
+})();

examples/discovery-mechanisms/README.md

@@ -2,36 +2,36 @@
 
 A Peer Discovery module enables libp2p to find peers to connect to. Think of these mechanisms as ways to join the rest of the network, as railing points.
 
-With these system, a libp2p node can both have a set of nodes to always connect on boot (bootstraper nodes), discover nodes through locality (e.g connected in the same LAN) or through serendipity (random walks on a DHT).
+With this system, a libp2p node can both have a set of nodes to always connect on boot (bootstraper nodes), discover nodes through locality (e.g connected in the same LAN) or through serendipity (random walks on a DHT).
 
 These mechanisms save configuration and enable a node to operate without any explicit dials, it will just work. Once new peers are discovered, their known data is stored in the peer's PeerStore.
 
 ## 1. Bootstrap list of Peers when booting a node
 
-For this demo, we will connect to IPFS default bootstrapper nodes and so, we will need to support the same set of features those nodes have, that are: TCP, mplex and NOISE. You can see the complete example at [1.js](./1.js).
+For this demo, we will connect to IPFS default bootstrapper nodes and so, we will need to support the same set of features those nodes have, that are: TCP, mplex, and NOISE. You can see the complete example at [1.js](./1.js).
 
 First, we create our libp2p node.
 
 ```JavaScript
-const Libp2p = require('libp2p')
-const Bootstrap = require('libp2p-bootstrap')
+import { createLibp2p } from 'libp2p'
+import { Bootstrap } from '@libp2p/bootstrap'
 
-const node = Libp2p.create({
-  modules: {
-    transport: [ TCP ],
-    streamMuxer: [ Mplex ],
-    connEncryption: [ NOISE ],
-    peerDiscovery: [ Bootstrap ]
-  },
-  config: {
-    peerDiscovery: {
-      bootstrap: {
-        interval: 60e3,
-        enabled: true,
-        list: bootstrapers
-      }
-    }
-  }
+const node = await createLibp2p({
+  transports: [
+    new TCP()
+  ],
+  streamMuxers: [
+    new Mplex()
+  ],
+  connectionEncryption: [
+    new Noise()
+  ],
+  peerDiscovery: [
+    new Bootstrap({
+      interval: 60e3,
+      list: bootstrapers
+    })
+  ]
 })
 ```
 
@@ -40,40 +40,37 @@ In this configuration, we use a `bootstrappers` array listing peers to connect _
 ```JavaScript
 const bootstrapers = [
   '/ip4/104.131.131.82/tcp/4001/p2p/QmaCpDMGvV2BGHeYERUEnRQAwe3N8SzbUtfsmvsqQLuvuJ',
-  '/ip4/104.236.176.52/tcp/4001/p2p/QmSoLnSGccFuZQJzRadHn95W2CrSFmZuTdDWP8HXaHca9z',
-  '/ip4/104.236.179.241/tcp/4001/p2p/QmSoLPppuBtQSGwKDZT2M73ULpjvfd3aZ6ha4oFGL1KrGM',
-  '/ip4/162.243.248.213/tcp/4001/p2p/QmSoLueR4xBeUbY9WZ9xGUUxunbKWcrNFTDAadQJmocnWm',
-  '/ip4/128.199.219.111/tcp/4001/p2p/QmSoLSafTMBsPKadTEgaXctDQVcqN88CNLHXMkTNwMKPnu',
-  '/ip4/104.236.76.40/tcp/4001/p2p/QmSoLV4Bbm51jM9C4gDYZQ9Cy3U6aXMJDAbzgu2fzaDs64',
-  '/ip4/178.62.158.247/tcp/4001/p2p/QmSoLer265NRgSp2LA3dPaeykiS1J6DifTC88f5uVQKNAd',
-  '/ip4/178.62.61.185/tcp/4001/p2p/QmSoLMeWqB7YGVLJN3pNLQpmmEk35v6wYtsMGLzSr5QBU3',
-  '/ip4/104.236.151.122/tcp/4001/p2p/QmSoLju6m7xTh3DuokvT3886QRYqxAzb1kShaanJgW36yx'
+  '/dnsaddr/bootstrap.libp2p.io/p2p/QmNnooDu7bfjPFoTZYxMNLWUQJyrVwtbZg5gBMjTezGAJN',
+  '/dnsaddr/bootstrap.libp2p.io/p2p/QmbLHAnMoJPWSCR5Zhtx6BHJX9KiKNN6tpvbUcqanj75Nb',
+  '/dnsaddr/bootstrap.libp2p.io/p2p/QmZa1sAxajnQjVM8WjWXoMbmPd7NsWhfKsPkErzpm9wGkp',
+  '/dnsaddr/bootstrap.libp2p.io/p2p/QmQCU2EcMqAqQPR2i9bChDtGNJchTbq5TbXJJ16u19uLTa',
+  '/dnsaddr/bootstrap.libp2p.io/p2p/QmcZf59bWwK5XFi76CZX8cbJ4BhTzzA3gU1ZjYZcYW3dwt'
 ]
 ```
 
 Now, once we create and start the node, we can listen for events such as `peer:discovery` and `peer:connect`, these events tell us when we found a peer, independently of the discovery mechanism used and when we actually dialed to that peer.
 
 ```JavaScript
-const node = await Libp2p.create({
+const node = await createLibp2p({
   peerId,
   addresses: {
     listen: ['/ip4/0.0.0.0/tcp/0']
-  }
-  modules: {
-    transport: [ TCP ],
-    streamMuxer: [ Mplex ],
-    connEncryption: [ NOISE ],
-    peerDiscovery: [ Bootstrap ]
   },
-  config: {
-    peerDiscovery: {
-      bootstrap: {
-        interval: 60e3,
-        enabled: true,
-        list: bootstrapers
-      }
-    }
-  }
+  transports: [
+    new TCP()
+  ],
+  streamMuxers: [
+    new Mplex()
+  ],
+  connectionEncryption: [
+    new Noise()
+  ],
+  peerDiscovery: [
+    new Bootstrap({
+      interval: 60e3,
+      list: bootstrapers
+    })
+  ]
 })
 
 node.connectionManager.on('peer:connect', (connection) => {
@@ -93,23 +90,17 @@ From running [1.js](./1.js), you should see the following:
 ```bash
 > node 1.js
 Discovered: QmaCpDMGvV2BGHeYERUEnRQAwe3N8SzbUtfsmvsqQLuvuJ
-Discovered: QmSoLnSGccFuZQJzRadHn95W2CrSFmZuTdDWP8HXaHca9z
-Discovered: QmSoLPppuBtQSGwKDZT2M73ULpjvfd3aZ6ha4oFGL1KrGM
-Discovered: QmSoLueR4xBeUbY9WZ9xGUUxunbKWcrNFTDAadQJmocnWm
-Discovered: QmSoLSafTMBsPKadTEgaXctDQVcqN88CNLHXMkTNwMKPnu
-Discovered: QmSoLV4Bbm51jM9C4gDYZQ9Cy3U6aXMJDAbzgu2fzaDs64
-Discovered: QmSoLer265NRgSp2LA3dPaeykiS1J6DifTC88f5uVQKNAd
-Discovered: QmSoLMeWqB7YGVLJN3pNLQpmmEk35v6wYtsMGLzSr5QBU3
-Discovered: QmSoLju6m7xTh3DuokvT3886QRYqxAzb1kShaanJgW36yx
+Discovered: QmNnooDu7bfjPFoTZYxMNLWUQJyrVwtbZg5gBMjTezGAJN
+Discovered: QmbLHAnMoJPWSCR5Zhtx6BHJX9KiKNN6tpvbUcqanj75Nb
+Discovered: QmZa1sAxajnQjVM8WjWXoMbmPd7NsWhfKsPkErzpm9wGkp
+Discovered: QmQCU2EcMqAqQPR2i9bChDtGNJchTbq5TbXJJ16u19uLTa
+Discovered: QmcZf59bWwK5XFi76CZX8cbJ4BhTzzA3gU1ZjYZcYW3dwt
 Connection established to: QmaCpDMGvV2BGHeYERUEnRQAwe3N8SzbUtfsmvsqQLuvuJ
-Connection established to: QmSoLnSGccFuZQJzRadHn95W2CrSFmZuTdDWP8HXaHca9z
-Connection established to: QmSoLPppuBtQSGwKDZT2M73ULpjvfd3aZ6ha4oFGL1KrGM
-Connection established to: QmSoLueR4xBeUbY9WZ9xGUUxunbKWcrNFTDAadQJmocnWm
-Connection established to: QmSoLSafTMBsPKadTEgaXctDQVcqN88CNLHXMkTNwMKPnu
-Connection established to: QmSoLV4Bbm51jM9C4gDYZQ9Cy3U6aXMJDAbzgu2fzaDs64
-Connection established to: QmSoLer265NRgSp2LA3dPaeykiS1J6DifTC88f5uVQKNAd
-Connection established to: QmSoLMeWqB7YGVLJN3pNLQpmmEk35v6wYtsMGLzSr5QBU3
-Connection established to: QmSoLju6m7xTh3DuokvT3886QRYqxAzb1kShaanJgW36yx
+Connection established to: QmNnooDu7bfjPFoTZYxMNLWUQJyrVwtbZg5gBMjTezGAJN
+Connection established to: QmZa1sAxajnQjVM8WjWXoMbmPd7NsWhfKsPkErzpm9wGkp
+Connection established to: QmQCU2EcMqAqQPR2i9bChDtGNJchTbq5TbXJJ16u19uLTa
+Connection established to: QmcZf59bWwK5XFi76CZX8cbJ4BhTzzA3gU1ZjYZcYW3dwt
+Connection established to: QmbLHAnMoJPWSCR5Zhtx6BHJX9KiKNN6tpvbUcqanj75Nb
 ```
 
 ## 2. MulticastDNS to find other peers in the network
@@ -119,28 +110,28 @@ For this example, we need `libp2p-mdns`, go ahead and `npm install` it. You can
 Update your libp2p configuration to include MulticastDNS.
 
 ```JavaScript
-const Libp2p = require('libp2p')
-const MulticastDNS = require('libp2p-mdns')
+import { createLibp2p } from 'libp2p'
+import { MulticastDNS } from '@libp2p/mdns'
 
 const createNode = () => {
   return Libp2p.create({
     addresses: {
       listen: ['/ip4/0.0.0.0/tcp/0']
-    }
-    modules: {
-      transport: [ TCP ],
-      streamMuxer: [ Mplex ],
-      connEncryption: [ NOISE ],
-      peerDiscovery: [ MulticastDNS ]
     },
-    config: {
-      peerDiscovery: {
-        mdns: {
-          interval: 20e3,
-          enabled: true
-        }
-      }
-    }
+    transports: [
+      new TCP()
+    ],
+    streamMuxers: [
+      new Mplex()
+    ],
+    connectionEncryption: [
+      new Noise()
+    ],
+    peerDiscovery: [
+      new MulticastDNS({
+        interval: 20e3
+      })
+    ]
   })
 }
 ```
@@ -153,8 +144,13 @@ const [node1, node2] = await Promise.all([
   createNode()
 ])
 
-node1.on('peer:discovery', (peer) => console.log('Discovered:', peer.id.toB58String()))
-node2.on('peer:discovery', (peer) => console.log('Discovered:', peer.id.toB58String()))
+node1.on('peer:discovery', (peer) => console.log('Discovered:', peerId.toB58String()))
+node2.on('peer:discovery', (peer) => console.log('Discovered:', peerId.toB58String()))
+
+await Promise.all([
+  node1.start(),
+  node2.start()
+])
 ```
 
 If you run this example, you will see the other peers being discovered.
@@ -165,10 +161,103 @@ Discovered: QmSSbQpuKrxkoXHm1v4Pi35hPN5hUHMZoBoawEs2Nhvi8m
 Discovered: QmRcXXhtG8vTqwVBRonKWtV4ovDoC1Fe56WYtcrw694eiJ
 ```
 
-## 3. Where to find other Peer Discovery Mechanisms
+## 3. Pubsub based Peer Discovery
+
+For this example, we need [`libp2p-pubsub-peer-discovery`](https://github.com/libp2p/js-libp2p-pubsub-peer-discovery/), go ahead and `npm install` it. You also need to spin up a set of [`libp2p-relay-servers`](https://github.com/libp2p/js-libp2p-relay-server). These servers act as relay servers and a peer discovery source.
+
+In the context of this example, we will create and run the `libp2p-relay-server` in the same code snippet. You can find the complete solution at [3.js](./3.js).
+
+You can create your libp2p nodes as follows:
+
+```js
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { Gossipsub } from 'libp2p-gossipsub'
+import { Bootstrap } from '@libp2p/bootstrap'
+const PubsubPeerDiscovery from 'libp2p-pubsub-peer-discovery')
+
+const createNode = async (bootstrapers) => {
+  const node = await createLibp2p({
+    addresses: {
+      listen: ['/ip4/0.0.0.0/tcp/0']
+    },
+    transports: [
+    new TCP()
+  ],
+  streamMuxers: [
+    new Mplex()
+  ],
+  connectionEncryption: [
+    new Noise()
+  ],
+  peerDiscovery: [
+    new Bootstrap({
+      interval: 60e3,
+      list: bootstrapers
+    }),
+    new PubsubPeerDiscovery({
+      interval: 1000
+    })
+  ])
+
+  return node
+}
+```
+
+We will use the `libp2p-relay-server` as bootstrap nodes for the libp2p nodes, so that they establish a connection with the relay after starting. As a result, after they establish a connection with the relay, the pubsub discovery will kick in and the relay will advertise them.
+
+```js
+const relay = await createRelayServer({
+  addresses: {
+    listen: ['/ip4/0.0.0.0/tcp/0']
+  }
+})
+console.log(`libp2p relay starting with id: ${relay.peerId.toB58String()}`)
+await relay.start()
+const relayMultiaddrs = relay.multiaddrs.map((m) => `${m.toString()}/p2p/${relay.peerId.toB58String()}`)
+
+const [node1, node2] = await Promise.all([
+  createNode(relayMultiaddrs),
+  createNode(relayMultiaddrs)
+])
+
+node1.on('peer:discovery', (peerId) => {
+  console.log(`Peer ${node1.peerId.toB58String()} discovered: ${peerId.toB58String()}`)
+})
+node2.on('peer:discovery', (peerId) => {
+  console.log(`Peer ${node2.peerId.toB58String()} discovered: ${peerId.toB58String()}`)
+})
+
+;[node1, node2].forEach((node, index) => console.log(`Node ${index} starting with id: ${node.peerId.toB58String()}`))
+await Promise.all([
+  node1.start(),
+  node2.start()
+])
+```
+
+If you run this example, you will see the other peers being discovered.
+
+```bash
+> node 3.js
+libp2p relay starting with id: QmW6FqVV6RsyoGC5zaeFGW9gSWA3LcBRVZrjkKMruh38Bo
+Node 0 starting with id: QmezqDTmEjZ5BfMgVqjSpLY19mVVLTQ9bE9mRpZwtGxL8N
+Node 1 starting with id: QmYWeom2odTkm79DzB68NHULqVHDaNDqHhoyqLdcV1fqdv
+Peer QmezqDTmEjZ5BfMgVqjSpLY19mVVLTQ9bE9mRpZwtGxL8N discovered: QmW6FqVV6RsyoGC5zaeFGW9gSWA3LcBRVZrjkKMruh38Bo
+Peer QmYWeom2odTkm79DzB68NHULqVHDaNDqHhoyqLdcV1fqdv discovered: QmW6FqVV6RsyoGC5zaeFGW9gSWA3LcBRVZrjkKMruh38Bo
+Peer QmYWeom2odTkm79DzB68NHULqVHDaNDqHhoyqLdcV1fqdv discovered: QmezqDTmEjZ5BfMgVqjSpLY19mVVLTQ9bE9mRpZwtGxL8N
+Peer QmezqDTmEjZ5BfMgVqjSpLY19mVVLTQ9bE9mRpZwtGxL8N discovered: QmYWeom2odTkm79DzB68NHULqVHDaNDqHhoyqLdcV1fqdv
+```
+
+Taking into account the output, after the relay and both libp2p nodes start, both libp2p nodes will discover the bootstrap node (relay) and connect with it. After establishing a connection with the relay, they will discover each other.
+
+This is really useful when running libp2p in constrained environments like a browser. You can run a set of `libp2p-relay-server` nodes that will be responsible for both relaying websocket connections between browser nodes and for discovering other browser peers.
+
+## 4. Where to find other Peer Discovery Mechanisms
 
 There are plenty more Peer Discovery Mechanisms out there, you can:
 
 - Find one in [libp2p-webrtc-star](https://github.com/libp2p/js-libp2p-webrtc-star). Yes, a transport with discovery capabilities! This happens because WebRTC requires a rendezvous point for peers to exchange [SDP](https://tools.ietf.org/html/rfc4317) offer, which means we have one or more points that can introduce peers to each other. Think of it as MulticastDNS for the Web, as in MulticastDNS only works in LAN.
-- Any DHT will offer you a discovery capability. You can simple _random-walk_ the routing tables to find other peers to connect to. For example [libp2p-kad-dht](https://github.com/libp2p/js-libp2p-kad-dht) can be used for peer discovery. An example how to configure it to enable random walks can be found [here](https://github.com/libp2p/js-libp2p/blob/v0.28.4/doc/CONFIGURATION.md#customizing-dht).
+- Any DHT will offer you a discovery capability. You can simple _random-walk_ the routing tables to find other peers to connect to. For example [libp2p-kad-dht](https://github.com/libp2p/js-libp2p-kad-dht) can be used for peer discovery. An example of how to configure it to enable random walks can be found [here](https://github.com/libp2p/js-libp2p/blob/v0.28.4/doc/CONFIGURATION.md#customizing-dht).
 - You can create your own Discovery service, a registry, a list, a radio beacon, you name it!

examples/discovery-mechanisms/bootstrappers.js

@@ -0,0 +1,9 @@
+// Find this list at: https://github.com/ipfs/js-ipfs/blob/master/packages/ipfs-core-config/src/config.js
+export default [
+  '/ip4/104.131.131.82/tcp/4001/p2p/QmaCpDMGvV2BGHeYERUEnRQAwe3N8SzbUtfsmvsqQLuvuJ',
+  '/dnsaddr/bootstrap.libp2p.io/p2p/QmNnooDu7bfjPFoTZYxMNLWUQJyrVwtbZg5gBMjTezGAJN',
+  '/dnsaddr/bootstrap.libp2p.io/p2p/QmbLHAnMoJPWSCR5Zhtx6BHJX9KiKNN6tpvbUcqanj75Nb',
+  '/dnsaddr/bootstrap.libp2p.io/p2p/QmZa1sAxajnQjVM8WjWXoMbmPd7NsWhfKsPkErzpm9wGkp',
+  '/dnsaddr/bootstrap.libp2p.io/p2p/QmQCU2EcMqAqQPR2i9bChDtGNJchTbq5TbXJJ16u19uLTa',
+  '/dnsaddr/bootstrap.libp2p.io/p2p/QmcZf59bWwK5XFi76CZX8cbJ4BhTzzA3gU1ZjYZcYW3dwt',
+]

examples/discovery-mechanisms/test-1.js

@@ -0,0 +1,13 @@
+import path from 'path'
+import { waitForOutput } from '../utils.js'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+export async function test () {
+  process.stdout.write('1.js\n')
+
+  await waitForOutput('Connection established to:', 'node', [path.join(__dirname, '1.js')], {
+    cwd: __dirname
+  })
+}

examples/discovery-mechanisms/test-2.js

@@ -0,0 +1,33 @@
+import path from 'path'
+import execa from 'execa'
+import pWaitFor from 'p-wait-for'
+import { toString as uint8ArrayToString } from 'uint8arrays/to-string'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+export async function test () {
+  let discoveredNodes = 0
+
+  process.stdout.write('2.js\n')
+
+  const proc = execa('node', [path.join(__dirname, '2.js')], {
+    cwd: path.resolve(__dirname),
+    all: true
+  })
+
+  proc.all.on('data', async (data) => {
+    process.stdout.write(data)
+    const str = uint8ArrayToString(data)
+
+    str.split('\n').forEach(line => {
+      if (line.includes('Discovered:')) {
+        discoveredNodes++
+      }
+    })
+  })
+
+  await pWaitFor(() => discoveredNodes > 1)
+
+  proc.kill()
+}

examples/discovery-mechanisms/test-3.js

@@ -0,0 +1,33 @@
+import path from 'path'
+import execa from 'execa'
+import pWaitFor from 'p-wait-for'
+import { toString as uint8ArrayToString } from 'uint8arrays/to-string'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+export async function test () {
+  let discoveredNodes = 0
+
+  process.stdout.write('3.js\n')
+
+  const proc = execa('node', [path.join(__dirname, '3.js')], {
+    cwd: path.resolve(__dirname),
+    all: true
+  })
+
+  proc.all.on('data', async (data) => {
+    process.stdout.write(data)
+    const str = uint8ArrayToString(data)
+
+    str.split('\n').forEach(line => {
+      if (line.includes('discovered:')) {
+        discoveredNodes++
+      }
+    })
+  })
+
+  await pWaitFor(() => discoveredNodes > 3)
+
+  proc.kill()
+}

examples/discovery-mechanisms/test.js

@@ -0,0 +1,9 @@
+import { test as test1 } from './test-1.js'
+import { test as test2 } from './test-2.js'
+import { test as test3 } from './test-3.js'
+
+export async function test () {
+  await test1()
+  await test2()
+  await test3()
+}

examples/echo/src/dialer.js

@@ -1,23 +1,25 @@
-'use strict'
 /* eslint-disable no-console */
 
 /*
  * Dialer Node
  */
 
-const multiaddr = require('multiaddr')
-const PeerId = require('peer-id')
-const Node = require('./libp2p-bundle')
-const pipe = require('it-pipe')
+import { createLibp2p } from './libp2p.js'
+import { pipe } from 'it-pipe'
+import idd from './id-d.js'
+import idl from './id-l.js'
+import { createFromJSON } from '@libp2p/peer-id-factory'
+import { toString as uint8ArrayToString } from 'uint8arrays/to-string'
+import { fromString as uint8ArrayFromString } from 'uint8arrays/from-string'
 
 async function run() {
   const [dialerId, listenerId] = await Promise.all([
-    PeerId.createFromJSON(require('./id-d')),
-    PeerId.createFromJSON(require('./id-l'))
+    createFromJSON(idd),
+    createFromJSON(idl)
   ])
 
   // Dialer
-  const dialerNode = new Node({
+  const dialerNode = await createLibp2p({
     addresses: {
       listen: ['/ip4/0.0.0.0/tcp/0']
     },
@@ -25,14 +27,13 @@ async function run() {
   })
 
   // Add peer to Dial (the listener) into the PeerStore
-  const listenerMultiaddr = '/ip4/127.0.0.1/tcp/10333/p2p/' + listenerId.toB58String()
+  const listenerMultiaddr = '/ip4/127.0.0.1/tcp/10333/p2p/' + listenerId.toString()
 
   // Start the dialer libp2p node
   await dialerNode.start()
 
   console.log('Dialer ready, listening on:')
-  dialerNode.multiaddrs.forEach((ma) => console.log(ma.toString() +
-        '/p2p/' + dialerId.toB58String()))
+  dialerNode.getMultiaddrs().forEach((ma) => console.log(ma.toString()))
 
   // Dial the listener node
   console.log('Dialing to peer:', listenerMultiaddr)
@@ -42,7 +43,7 @@ async function run() {
 
   pipe(
     // Source data
-    ['hey'],
+    [uint8ArrayFromString('hey')],
     // Write to the stream, and pass its output to the next function
     stream,
     // Sink function
@@ -50,7 +51,7 @@ async function run() {
       // For each chunk of data
       for await (const data of source) {
         // Output the data
-        console.log('received echo:', data.toString())
+        console.log('received echo:', uint8ArrayToString(data))
       }
     }
   )

examples/echo/src/id-d.js

@@ -1,4 +1,4 @@
-{
+export default {
   "id": "Qma3GsJmB47xYuyahPZPSadh1avvxfyYQwk8R3UnFrQ6aP",
   "privKey": "CAASpwkwggSjAgEAAoIBAQCaNSDOjPz6T8HZsf7LDpxiQRiN2OjeyIHUS05p8QWOr3EFUCFsC31R4moihE5HN+FxNalUyyFZU//yjf1pdnlMJqrVByJSMa+y2y4x2FucpoCAO97Tx+iWzwlZ2UXEUXM1Y81mhPbeWXy+wP2xElTgIER0Tsn/thoA0SD2u9wJuVvM7dB7cBcHYmqV6JH+KWCedRTum6O1BssqP/4Lbm2+rkrbZ4+oVRoU2DRLoFhKqwqLtylrbuj4XOI3XykMXV5+uQXz1JzubNOB9lsc6K+eRC+w8hhhDuFMgzkZ4qomCnx3uhO67KaICd8yqqBa6PJ/+fBM5Xk4hjyR40bwcf41AgMBAAECggEAZnrCJ6IYiLyyRdr9SbKXCNDb4YByGYPEi/HT1aHgIJfFE1PSMjxcdytxfyjP4JJpVtPjiT9JFVU2ddoYu5qJN6tGwjVwgJEWg1UXmPaAw1T/drjS94kVsAs82qICtFmwp52Apg3dBZ0Qwq/8qE1XbG7lLyohIbfCBiL0tiPYMfkcsN9gnFT/kFCX0LVs2pa9fHCRMY9rqCc4/rWJa1w8sMuQ23y4lDaxKF9OZVvOHFQkbBDrkquWHE4r55fchCz/rJklkPJUNENuncBRu0/2X+p4IKFD1DnttXNwb8j4LPiSlLro1T0hiUr5gO2QmdYwXFF63Q3mjQy0+5I4eNbjjQKBgQDZvZy3gUKS/nQNkYfq9za80uLbIj/cWbO+ZZjXCsj0fNIcQFJcKMBoA7DjJvu2S/lf86/41YHkPdmrLAEQAkJ+5BBNOycjYK9minTEjIMMmZDTXXugZ62wnU6F46uLkgEChTqEP57Y6xwwV+JaEDFEsW5N1eE9lEVX9nGIr4phMwKBgQC1TazLuEt1WBx/iUT83ita7obXqoKNzwsS/MWfY2innzYZKDOqeSYZzLtt9uTtp4X4uLyPbYs0qFYhXLsUYMoGHNN8+NdjoyxCjQRJRBkMtaNR0lc5lVDWl3bTuJovjFCgAr9uqJrmI5OHcCIk/cDpdWb3nWaMihVlePmiTcTy9wKBgQCU0u7c1jKkudqks4XM6a+2HAYGdUBk4cLjLhnrUWnNAcuyl5wzdX8dGPi8KZb+IKuQE8WBNJ2VXVj7kBYh1QmSJVunDflQSvNYCOaKuOeRoxzD+y9Wkca74qkbBmPn/6FFEb7PSZTO+tPHjyodGNgz9XpJJRjQuBk1aDJtlF3m1QKBgE5SAr5ym65SZOU3UGUIOKRsfDW4Q/OsqDUImvpywCgBICaX9lHDShFFHwau7FA52ScL7vDquoMB4UtCOtLfyQYA9995w9oYCCurrVlVIJkb8jSLcADBHw3EmqF1kq3NqJqm9TmBfoDCh52vdCCUufxgKh33kfBOSlXuf7B8dgMbAoGAZ3r0/mBQX6S+s5+xCETMTSNv7TQzxgtURIpVs+ZVr2cMhWhiv+n0Omab9X9Z50se8cWl5lkvx8vn3D/XHHIPrMF6qk7RAXtvReb+PeitNvm0odqjFv0J2qki6fDs0HKwq4kojAXI1Md8Th0eobNjsy21fEEJT7uKMJdovI/SErI=",
   "pubKey": "CAASpgIwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQCaNSDOjPz6T8HZsf7LDpxiQRiN2OjeyIHUS05p8QWOr3EFUCFsC31R4moihE5HN+FxNalUyyFZU//yjf1pdnlMJqrVByJSMa+y2y4x2FucpoCAO97Tx+iWzwlZ2UXEUXM1Y81mhPbeWXy+wP2xElTgIER0Tsn/thoA0SD2u9wJuVvM7dB7cBcHYmqV6JH+KWCedRTum6O1BssqP/4Lbm2+rkrbZ4+oVRoU2DRLoFhKqwqLtylrbuj4XOI3XykMXV5+uQXz1JzubNOB9lsc6K+eRC+w8hhhDuFMgzkZ4qomCnx3uhO67KaICd8yqqBa6PJ/+fBM5Xk4hjyR40bwcf41AgMBAAE="

examples/echo/src/id-l.js

@@ -1,4 +1,4 @@
-{
+export default {
   "id": "QmcrQZ6RJdpYuGvZqD5QEHAv6qX4BrQLJLQPQUrTrzdcgm",
   "privKey": "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",
   "pubKey": "CAASpgIwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDLZZcGcbe4urMBVlcHgN0fpBymY+xcr14ewvamG70QZODJ1h9sljlExZ7byLiqRB3SjGbfpZ1FweznwNxWtWpjHkQjTVXeoM4EEgDSNO/Cg7KNlU0EJvgPJXeEPycAZX9qASbVJ6EECQ40VR/7+SuSqsdL1hrmG1phpIju+D64gLyWpw9WEALfzMpH5I/KvdYDW3N4g6zOD2mZNp5y1gHeXINHWzMF596O72/6cxwyiXV1eJ000k1NVnUyrPjXtqWdVLRk5IU1LFpoQoXZU5X1hKj1a2qt/lZfH5eOrF/ramHcwhrYYw1txf8JHXWO/bbNnyemTHAvutZpTNrsWATfAgMBAAE="

examples/echo/src/libp2p-bundle.js

@@ -1,28 +0,0 @@
-'use strict'
-
-const TCP = require('libp2p-tcp')
-const WS = require('libp2p-websockets')
-const mplex = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-
-const defaultsDeep = require('@nodeutils/defaults-deep')
-const libp2p = require('../../..')
-
-class Node extends libp2p {
-  constructor (_options) {
-    const defaults = {
-      modules: {
-        transport: [
-          TCP,
-          WS
-        ],
-        streamMuxer: [ mplex ],
-        connEncryption: [ NOISE ]
-      }
-    }
-
-    super(defaultsDeep(_options, defaults))
-  }
-}
-
-module.exports = Node

examples/echo/src/libp2p.js

@@ -0,0 +1,23 @@
+import { TCP } from '@libp2p/tcp'
+import { WebSockets } from '@libp2p/websockets'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import defaultsDeep from '@nodeutils/defaults-deep'
+import { createLibp2p as createNode } from 'libp2p'
+
+export async function createLibp2p(_options) {
+  const defaults = {
+    transports: [
+      new TCP(),
+      new WebSockets()
+    ],
+    streamMuxers: [
+      new Mplex()
+    ],
+    connectionEncryption: [
+      new Noise()
+    ]
+  }
+
+  return createNode(defaultsDeep(_options, defaults))
+}

examples/echo/src/listener.js

@@ -1,19 +1,19 @@
-'use strict'
 /* eslint-disable no-console */
 
 /*
  * Listener Node
  */
 
-const PeerId = require('peer-id')
-const Node = require('./libp2p-bundle')
-const pipe = require('it-pipe')
+import { createLibp2p } from './libp2p.js'
+import { pipe } from 'it-pipe'
+import { createFromJSON } from '@libp2p/peer-id-factory'
+import idl from './id-l.js'
 
 async function run() {
-  const listenerId = await PeerId.createFromJSON(require('./id-l'))
+  const listenerId = await createFromJSON(idl)
 
   // Listener libp2p node
-  const listenerNode = new Node({
+  const listenerNode = await createLibp2p({
     addresses: {
       listen: ['/ip4/0.0.0.0/tcp/10333']
     },
@@ -21,8 +21,9 @@ async function run() {
   })
 
   // Log a message when we receive a connection
-  listenerNode.connectionManager.on('peer:connect', (connection) => {
-    console.log('received dial to me from:', connection.remotePeer.toB58String())
+  listenerNode.connectionManager.addEventListener('peer:connect', (evt) => {
+    const connection = evt.detail
+    console.log('received dial to me from:', connection.remotePeer.toString())
   })
 
   // Handle incoming connections for the protocol by piping from the stream
@@ -33,8 +34,8 @@ async function run() {
   await listenerNode.start()
 
   console.log('Listener ready, listening on:')
-  listenerNode.multiaddrs.forEach((ma) => {
-    console.log(ma.toString() + '/p2p/' + listenerId.toB58String())
+  listenerNode.getMultiaddrs().forEach((ma) => {
+    console.log(ma.toString())
   })
 }
 

examples/echo/test.js

@@ -0,0 +1,60 @@
+import path from 'path'
+import execa from 'execa'
+import pDefer from 'p-defer'
+import { toString as uint8ArrayToString } from 'uint8arrays/to-string'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+function startProcess(name) {
+  return execa('node', [path.join(__dirname, name)], {
+    cwd: path.resolve(__dirname),
+    all: true
+  })
+}
+
+export async function test () {
+  const listenerReady = pDefer()
+  const messageReceived = pDefer()
+
+  // Step 1 process
+  process.stdout.write('node listener.js\n')
+  const listenerProc = startProcess('src/listener.js')
+  listenerProc.all.on('data', async (data) => {
+    process.stdout.write(data)
+    const s = uint8ArrayToString(data)
+
+    if (s.includes('Listener ready, listening on:')) {
+      listenerReady.resolve()
+    }
+  })
+
+  await listenerReady.promise
+  process.stdout.write('==================================================================\n')
+
+  // Step 2 process
+  process.stdout.write('node dialer.js\n')
+  const dialerProc = startProcess('src/dialer.js')
+  dialerProc.all.on('data', async (data) => {
+    process.stdout.write(data)
+    const s = uint8ArrayToString(data)
+
+    if (s.includes('received echo:')) {
+      messageReceived.resolve()
+    }
+  })
+
+  await messageReceived.promise
+  process.stdout.write('echo message received\n')
+
+  listenerProc.kill()
+  dialerProc.kill()
+  await Promise.all([
+    listenerProc,
+    dialerProc
+  ]).catch((err) => {
+    if (err.signal !== 'SIGTERM') {
+      throw err
+    }
+  })
+}

examples/encrypted-communications/1.js

@@ -1,52 +0,0 @@
-'use strict'
-
-const Libp2p = require('../../')
-const TCP = require('libp2p-tcp')
-const Mplex = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-
-const pipe = require('it-pipe')
-
-const createNode = async () => {
-  const node = await Libp2p.create({
-    addresses: {
-      listen: ['/ip4/0.0.0.0/tcp/0']
-    },
-    modules: {
-      transport: [TCP],
-      streamMuxer: [Mplex],
-      connEncryption: [NOISE]
-    }
-  })
-
-  await node.start()
-
-  return node
-}
-
-;(async () => {
-  const [node1, node2] = await Promise.all([
-    createNode(),
-    createNode()
-  ])
-
-  node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
-
-  node2.handle('/a-protocol', ({ stream }) => {
-    pipe(
-      stream,
-      async function (source) {
-        for await (const msg of source) {
-          console.log(msg.toString())
-        }
-      }
-    )
-  })
-
-  const { stream } = await node1.dialProtocol(node2.peerId, '/a-protocol')
-
-  await pipe(
-    ['This information is sent out encrypted to the other peer'],
-    stream
-  )
-})();

examples/libp2p-in-the-browser/.babelrc

@@ -1,4 +0,0 @@
-{
-  "presets": ["@babel/preset-env"],
-  "plugins": ["syntax-async-functions","transform-regenerator"]
-}

examples/libp2p-in-the-browser/README.md

@@ -4,9 +4,13 @@ This example leverages the [Parcel.js bundler](https://parceljs.org/) to compile
 
 ## Setup
 
-In order to run the example, first install the dependencies from same directory as this README:
+In order to run the example:
+
+- Install dependencey at the root of the js-libp2p repository (if not already done), 
+- then, install the dependencies from same directory as this README:
 
 ```
+npm install
 cd ./examples/libp2p-in-the-browser
 npm install
 ```

examples/libp2p-in-the-browser/index.html

@@ -16,7 +16,7 @@
       <pre id="output"></pre>
     </main>
 
-    <script src="./index.js"></script>
+    <script type="module" src="./index.js"></script>
 
   </body>
 

examples/libp2p-in-the-browser/index.js

@@ -1,14 +1,15 @@
-import 'babel-polyfill'
-import Libp2p from 'libp2p'
-import Websockets from 'libp2p-websockets'
-import WebRTCStar from 'libp2p-webrtc-star'
-import { NOISE } from 'libp2p-noise'
-import Mplex from 'libp2p-mplex'
-import Bootstrap from 'libp2p-bootstrap'
+import { createLibp2p } from 'libp2p'
+import { WebSockets } from '@libp2p/websockets'
+import { WebRTCStar } from '@libp2p/webrtc-star'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { Mplex } from '@libp2p/mplex'
+import { Bootstrap } from '@libp2p/bootstrap'
 
 document.addEventListener('DOMContentLoaded', async () => {
+  const webRtcStar = new WebRTCStar()
+
   // Create our libp2p node
-  const libp2p = await Libp2p.create({
+  const libp2p = await createLibp2p({
     addresses: {
       // Add the signaling server address, along with our PeerId to our multiaddrs list
       // libp2p will automatically attempt to dial to the signaling server so that it can
@@ -18,29 +19,24 @@ document.addEventListener('DOMContentLoaded', async () => {
         '/dns4/wrtc-star2.sjc.dwebops.pub/tcp/443/wss/p2p-webrtc-star'
       ]
     },
-    modules: {
-      transport: [Websockets, WebRTCStar],
-      connEncryption: [NOISE],
-      streamMuxer: [Mplex],
-      peerDiscovery: [Bootstrap]
-    },
-    config: {
-      peerDiscovery: {
-        // The `tag` property will be searched when creating the instance of your Peer Discovery service.
-        // The associated object, will be passed to the service when it is instantiated.
-        [Bootstrap.tag]: {
-          enabled: true,
-          list: [
-            '/dns4/ams-1.bootstrap.libp2p.io/tcp/443/wss/p2p/QmSoLer265NRgSp2LA3dPaeykiS1J6DifTC88f5uVQKNAd',
-            '/dns4/lon-1.bootstrap.libp2p.io/tcp/443/wss/p2p/QmSoLMeWqB7YGVLJN3pNLQpmmEk35v6wYtsMGLzSr5QBU3',
-            '/dns4/sfo-3.bootstrap.libp2p.io/tcp/443/wss/p2p/QmSoLPppuBtQSGwKDZT2M73ULpjvfd3aZ6ha4oFGL1KrGM',
-            '/dns4/sgp-1.bootstrap.libp2p.io/tcp/443/wss/p2p/QmSoLSafTMBsPKadTEgaXctDQVcqN88CNLHXMkTNwMKPnu',
-            '/dns4/nyc-1.bootstrap.libp2p.io/tcp/443/wss/p2p/QmSoLueR4xBeUbY9WZ9xGUUxunbKWcrNFTDAadQJmocnWm',
-            '/dns4/nyc-2.bootstrap.libp2p.io/tcp/443/wss/p2p/QmSoLV4Bbm51jM9C4gDYZQ9Cy3U6aXMJDAbzgu2fzaDs64'
-          ]
-        }
-      }
-    }
+    transports: [
+      new WebSockets(),
+      webRtcStar
+    ],
+    connectionEncryption: [new Noise()],
+    streamMuxers: [new Mplex()],
+    peerDiscovery: [
+      webRtcStar.discovery,
+      new Bootstrap({
+        list: [
+          '/dnsaddr/bootstrap.libp2p.io/p2p/QmNnooDu7bfjPFoTZYxMNLWUQJyrVwtbZg5gBMjTezGAJN',
+          '/dnsaddr/bootstrap.libp2p.io/p2p/QmbLHAnMoJPWSCR5Zhtx6BHJX9KiKNN6tpvbUcqanj75Nb',
+          '/dnsaddr/bootstrap.libp2p.io/p2p/QmZa1sAxajnQjVM8WjWXoMbmPd7NsWhfKsPkErzpm9wGkp',
+          '/dnsaddr/bootstrap.libp2p.io/p2p/QmQCU2EcMqAqQPR2i9bChDtGNJchTbq5TbXJJ16u19uLTa',
+          '/dnsaddr/bootstrap.libp2p.io/p2p/QmcZf59bWwK5XFi76CZX8cbJ4BhTzzA3gU1ZjYZcYW3dwt'
+        ]
+      })
+    ]
   })
 
   // UI elements
@@ -55,23 +51,26 @@ document.addEventListener('DOMContentLoaded', async () => {
   }
 
   // Listen for new peers
-  libp2p.on('peer:discovery', (peerId) => {
-    log(`Found peer ${peerId.toB58String()}`)
+  libp2p.addEventListener('peer:discovery', (evt) => {
+    const peer = evt.detail
+    log(`Found peer ${peer.id.toString()}`)
   })
 
   // Listen for new connections to peers
-  libp2p.connectionManager.on('peer:connect', (connection) => {
-    log(`Connected to ${connection.remotePeer.toB58String()}`)
+  libp2p.connectionManager.addEventListener('peer:connect', (evt) => {
+    const connection = evt.detail
+    log(`Connected to ${connection.remotePeer.toString()}`)
   })
 
   // Listen for peers disconnecting
-  libp2p.connectionManager.on('peer:disconnect', (connection) => {
-    log(`Disconnected from ${connection.remotePeer.toB58String()}`)
+  libp2p.connectionManager.addEventListener('peer:disconnect', (evt) => {
+    const connection = evt.detail
+    log(`Disconnected from ${connection.remotePeer.toString()}`)
   })
 
   await libp2p.start()
   status.innerText = 'libp2p started!'
-  log(`libp2p id is ${libp2p.peerId.toB58String()}`)
+  log(`libp2p id is ${libp2p.peerId.toString()}`)
 
   // Export libp2p to the window so you can play with the API
   window.libp2p = libp2p

examples/libp2p-in-the-browser/package.json

@@ -2,32 +2,21 @@
   "name": "libp2p-in-browser",
   "version": "1.0.0",
   "description": "A libp2p node running in the browser",
-  "main": "index.js",
-  "browserslist": [
-    "last 2 Chrome versions"
-  ],
+  "type": "module",
   "scripts": {
     "test": "echo \"Error: no test specified\" && exit 1",
-    "start": "parcel index.html"
+    "start": "vite"
   },
-  "keywords": [],
-  "author": "",
   "license": "ISC",
   "dependencies": {
-    "@babel/preset-env": "^7.8.3",
-    "libp2p": "../../",
-    "libp2p-bootstrap": "^0.12.1",
-    "libp2p-mplex": "^0.10.0",
-    "libp2p-noise": "^2.0.0",
-    "libp2p-webrtc-star": "^0.20.0",
-    "libp2p-websockets": "^0.14.0"
+    "@chainsafe/libp2p-noise": "^6.1.1",
+    "@libp2p/bootstrap": "^1.0.4",
+    "@libp2p/mplex": "^1.0.4",
+    "@libp2p/webrtc-star": "^1.0.8",
+    "@libp2p/websockets": "^1.0.7",
+    "libp2p": "../../"
   },
   "devDependencies": {
-    "@babel/cli": "^7.8.3",
-    "@babel/core": "^7.8.3",
-    "babel-plugin-syntax-async-functions": "^6.13.0",
-    "babel-plugin-transform-regenerator": "^6.26.0",
-    "babel-polyfill": "^6.26.0",
-    "parcel-bundler": "^1.12.4"
+    "vite": "^2.8.6"
   }
 }

examples/libp2p-in-the-browser/test.js

@@ -0,0 +1,47 @@
+import execa from 'execa'
+import { chromium } from 'playwright'
+import path from 'path'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+export async function test () {
+  let url = 'http://localhost:3000'
+
+  const proc = execa('vite', [], {
+    preferLocal: true,
+    localDir: __dirname,
+    cwd: __dirname,
+    all: true
+  })
+
+  proc.all.on('data', async (chunk) => {
+    /**@type {string} */
+    const out = chunk.toString()
+
+    if (out.includes('ready in')) {
+      try {
+        const browser = await chromium.launch();
+        const page = await browser.newPage();
+        await page.goto(url);
+        await page.waitForFunction(selector => document.querySelector(selector).innerText === 'libp2p started!', '#status')
+        await page.waitForFunction(
+          selector => {
+            const text = document.querySelector(selector).innerText
+            return text.includes('libp2p id is') &&
+              text.includes('Found peer') &&
+              text.includes('Connected to')
+          },
+          '#output',
+          { timeout: 5000 }
+        )
+        await browser.close()
+      } catch (err) {
+        console.error(err)
+        process.exit(1)
+      } finally {
+        proc.cancel()
+      }
+    }
+  })
+}

examples/libp2p-in-the-browser/vite.config.js

@@ -0,0 +1,5 @@
+export default {
+  build: {
+    target: 'es2020'
+  }
+}

examples/package.json

@@ -0,0 +1,25 @@
+{
+  "name": "libp2p-examples",
+  "version": "1.0.0",
+  "description": "Examples of how to use libp2p",
+  "type": "module",
+  "scripts": {
+    "test": "node ./test.js",
+    "test:all": "node ./test-all.js"
+  },
+  "license": "MIT",
+  "dependencies": {
+    "@libp2p/pubsub-peer-discovery": "^5.0.2",
+    "@libp2p/floodsub": "^1.0.6",
+    "execa": "^2.1.0",
+    "fs-extra": "^8.1.0",
+    "libp2p": "../",
+    "p-defer": "^3.0.0",
+    "uint8arrays": "^3.0.0",
+    "which": "^2.0.1"
+  },
+  "devDependencies": {
+    "https": "^1.0.0",
+    "playwright": "^1.7.1"
+  }
+}

examples/peer-and-content-routing/1.js

@@ -1,30 +1,21 @@
 /* eslint-disable no-console */
-'use strict'
 
-const Libp2p = require('../../')
-const TCP = require('libp2p-tcp')
-const Mplex = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-const KadDHT = require('libp2p-kad-dht')
-
-const delay = require('delay')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { KadDHT } from '@libp2p/kad-dht'
+import delay from 'delay'
 
 const createNode = async () => {
-  const node = await Libp2p.create({
+  const node = await createLibp2p({
     addresses: {
       listen: ['/ip4/0.0.0.0/tcp/0']
     },
-    modules: {
-      transport: [TCP],
-      streamMuxer: [Mplex],
-      connEncryption: [NOISE],
-      dht: KadDHT
-    },
-    config: {
-      dht: {
-        enabled: true
-      }
-    }
+    transports: [new TCP()],
+    streamMuxers: [new Mplex()],
+    connectionEncryption: [new Noise()],
+    dht: new KadDHT()
   })
 
   await node.start()
@@ -38,8 +29,8 @@ const createNode = async () => {
     createNode()
   ])
 
-  node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
-  node2.peerStore.addressBook.set(node3.peerId, node3.multiaddrs)
+  await node1.peerStore.addressBook.set(node2.peerId, node2.getMultiaddrs())
+  await node2.peerStore.addressBook.set(node3.peerId, node3.getMultiaddrs())
 
   await Promise.all([
     node1.dial(node2.peerId),
@@ -52,5 +43,5 @@ const createNode = async () => {
   const peer = await node1.peerRouting.findPeer(node3.peerId)
 
   console.log('Found it, multiaddrs are:')
-  peer.multiaddrs.forEach((ma) => console.log(`${ma.toString()}/p2p/${peer.id.toB58String()}`))
+  peer.multiaddrs.forEach((ma) => console.log(ma.toString()))
 })();

examples/peer-and-content-routing/2.js

@@ -1,32 +1,23 @@
 /* eslint-disable no-console */
-'use strict'
 
-const Libp2p = require('../../')
-const TCP = require('libp2p-tcp')
-const Mplex = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-const CID = require('cids')
-const KadDHT = require('libp2p-kad-dht')
-
-const all = require('it-all')
-const delay = require('delay')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { CID } from 'multiformats/cid'
+import { KadDHT } from '@libp2p/kad-dht'
+import all from 'it-all'
+import delay from 'delay'
 
 const createNode = async () => {
-  const node = await Libp2p.create({
+  const node = await createLibp2p({
     addresses: {
       listen: ['/ip4/0.0.0.0/tcp/0']
     },
-    modules: {
-      transport: [TCP],
-      streamMuxer: [Mplex],
-      connEncryption: [NOISE],
-      dht: KadDHT
-    },
-    config: {
-      dht: {
-        enabled: true
-      }
-    }
+    transports: [new TCP()],
+    streamMuxers: [new Mplex()],
+    connectionEncryption: [new Noise()],
+    dht: new KadDHT()
   })
 
   await node.start()
@@ -40,8 +31,8 @@ const createNode = async () => {
     createNode()
   ])
 
-  node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
-  node2.peerStore.addressBook.set(node3.peerId, node3.multiaddrs)
+  await node1.peerStore.addressBook.set(node2.peerId, node2.getMultiaddrs())
+  await node2.peerStore.addressBook.set(node3.peerId, node3.getMultiaddrs())
 
   await Promise.all([
     node1.dial(node2.peerId),
@@ -51,15 +42,15 @@ const createNode = async () => {
   // Wait for onConnect handlers in the DHT
   await delay(100)
 
-  const cid = new CID('QmTp9VkYvnHyrqKQuFPiuZkiX9gPcqj6x5LJ1rmWuSySnL')
+  const cid = CID.parse('QmTp9VkYvnHyrqKQuFPiuZkiX9gPcqj6x5LJ1rmWuSySnL')
   await node1.contentRouting.provide(cid)
 
-  console.log('Node %s is providing %s', node1.peerId.toB58String(), cid.toBaseEncodedString())
+  console.log('Node %s is providing %s', node1.peerId.toString(), cid.toString())
 
   // wait for propagation
   await delay(300)
 
   const providers = await all(node3.contentRouting.findProviders(cid, { timeout: 3000 }))
 
-  console.log('Found provider:', providers[0].id.toB58String())
+  console.log('Found provider:', providers[0].id.toString())
 })();

examples/peer-and-content-routing/README.md

@@ -13,26 +13,24 @@ This example builds on top of the [Protocol and Stream Muxing](../protocol-and-s
 First, let's update our config to support Peer Routing and Content Routing.
 
 ```JavaScript
-const Libp2p = require('libp2p')
-const KadDHT = require('libp2p-kad-dht')
+import { createLibp2p } from 'libp2p'
+import { KadDHT } from '@libp2p/kad-dht'
 
-const node = await Libp2p.create({
+const node = await createLibp2p({
   addresses: {
     listen: ['/ip4/0.0.0.0/tcp/0']
   },
-  modules: {
-    transport: [ TCP ],
-    streamMuxer: [ Mplex ],
-    connEncryption: [ NOISE ],
-    // we add the DHT module that will enable Peer and Content Routing
-    dht: KadDHT
-  },
-  config: {
-    dht: {
-      // dht must be enabled
-      enabled: true
-    }
-  }
+  transports: [
+    new TCP()
+  ],
+  streamMuxers: [
+    new Mplex()
+  ],
+  connEncryption: [
+    new Noise()
+  ],
+  // we add the DHT module that will enable Peer and Content Routing
+  dht: KadDHT
 })
 ```
 
@@ -43,8 +41,8 @@ const node1 = nodes[0]
 const node2 = nodes[1]
 const node3 = nodes[2]
 
-node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
-node2.peerStore.addressBook.set(node3.peerId, node3.multiaddrs)
+await node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
+await node2.peerStore.addressBook.set(node3.peerId, node3.multiaddrs)
 
 await Promise.all([
   node1.dial(node2.peerId),
@@ -81,7 +79,7 @@ Instead of calling `peerRouting.findPeer`, we will use `contentRouting.provide`
 
 ```JavaScript
 await node1.contentRouting.provide(cid)
-console.log('Node %s is providing %s', node1.peerId.toB58String(), cid.toBaseEncodedString())
+console.log('Node %s is providing %s', node1.peerId.toB58String(), cid.toString())
 
 const provs = await all(node3.contentRouting.findProviders(cid, { timeout: 5000 }))
 

examples/peer-and-content-routing/test-1.js

@@ -0,0 +1,13 @@
+import path from 'path'
+import { waitForOutput } from '../utils.js'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+export async function test () {
+  process.stdout.write('1.js\n')
+
+  await waitForOutput('Found it, multiaddrs are:', 'node', [path.join(__dirname, '1.js')], {
+    cwd: __dirname
+  })
+}

examples/peer-and-content-routing/test-2.js

@@ -0,0 +1,13 @@
+import path from 'path'
+import { waitForOutput } from '../utils.js'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+export async function test () {
+  process.stdout.write('2.js\n')
+
+  await waitForOutput('Found provider:', 'node', [path.join(__dirname, '2.js')], {
+    cwd: __dirname
+  })
+}

examples/peer-and-content-routing/test.js

@@ -0,0 +1,7 @@
+import { test as test1 } from './test-1.js'
+import { test as test2 } from './test-2.js'
+
+export async function test() {
+  await test1()
+  await test2()
+}

examples/pnet/index.js

@@ -1,18 +1,18 @@
 /* eslint no-console: ["off"] */
-'use strict'
 
-const { generate } = require('libp2p/src/pnet')
-const privateLibp2pNode = require('./libp2p-node')
-
-const pipe = require('it-pipe')
+import { generateKey } from 'libp2p/pnet'
+import { privateLibp2pNode } from './libp2p-node.js'
+import { pipe } from 'it-pipe'
+import { fromString as uint8ArrayFromString } from 'uint8arrays/from-string'
+import { toString as uint8ArrayToString } from 'uint8arrays/to-string'
 
 // Create a Uint8Array and write the swarm key to it
 const swarmKey = new Uint8Array(95)
-generate(swarmKey)
+generateKey(swarmKey)
 
 // This key is for testing a different key not working
 const otherSwarmKey = new Uint8Array(95)
-generate(otherSwarmKey)
+generateKey(otherSwarmKey)
 
 ;(async () => {
   const node1 = await privateLibp2pNode(swarmKey)
@@ -29,7 +29,7 @@ generate(otherSwarmKey)
   console.log('nodes started...')
 
   // Add node 2 data to node1's PeerStore
-  node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
+  await node1.peerStore.addressBook.set(node2.peerId, node2.getMultiaddrs())
   await node1.dial(node2.peerId)
 
   node2.handle('/private', ({ stream }) => {
@@ -37,7 +37,7 @@ generate(otherSwarmKey)
       stream,
       async function (source) {
         for await (const msg of source) {
-          console.log(msg.toString())
+          console.log(uint8ArrayToString(msg))
         }
       }
     )
@@ -46,7 +46,7 @@ generate(otherSwarmKey)
   const { stream } = await node1.dialProtocol(node2.peerId, '/private')
 
   await pipe(
-    ['This message is sent on a private network'],
+    [uint8ArrayFromString('This message is sent on a private network')],
     stream
   )
 })()

examples/pnet/libp2p-node.js

@@ -1,38 +1,31 @@
-'use strict'
-
-const Libp2p = require('libp2p')
-const TCP = require('libp2p-tcp')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-const Protector = require('libp2p/src/pnet')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { PreSharedKeyConnectionProtector } from 'libp2p/pnet'
 
 /**
  * privateLibp2pNode returns a libp2p node function that will use the swarm
  * key with the given `swarmKey` to create the Protector
- *
- * @param {Uint8Array} swarmKey
- * @returns {Promise<libp2p>} Returns a libp2pNode function for use in IPFS creation
  */
-const privateLibp2pNode = async (swarmKey) => {
-  const node = await Libp2p.create({
+export async function privateLibp2pNode (swarmKey) {
+  const node = await createLibp2p({
     addresses: {
       listen: ['/ip4/0.0.0.0/tcp/0']
     },
-    modules: {
-      transport: [TCP], // We're only using the TCP transport for this example
-      streamMuxer: [MPLEX], // We're only using mplex muxing
-      // Let's make sure to use identifying crypto in our pnet since the protector doesn't
-      // care about node identity, and only the presence of private keys
-      connEncryption: [NOISE],
-      // Leave peer discovery empty, we don't want to find peers. We could omit the property, but it's
-      // being left in for explicit readability.
-      // We should explicitly dial pnet peers, or use a custom discovery service for finding nodes in our pnet
-      peerDiscovery: [],
-      connProtector: new Protector(swarmKey)
-    }
+    transports: [new TCP()], // We're only using the TCP transport for this example
+    streamMuxers: [new Mplex()], // We're only using mplex muxing
+    // Let's make sure to use identifying crypto in our pnet since the protector doesn't
+    // care about node identity, and only the presence of private keys
+    connectionEncryption: [new Noise()],
+    // Leave peer discovery empty, we don't want to find peers. We could omit the property, but it's
+    // being left in for explicit readability.
+    // We should explicitly dial pnet peers, or use a custom discovery service for finding nodes in our pnet
+    peerDiscovery: [],
+    connectionProtector: new PreSharedKeyConnectionProtector({
+      psk: swarmKey
+    })
   })
 
   return node
 }
-
-module.exports = privateLibp2pNode

examples/pnet/test.js

@@ -0,0 +1,12 @@
+import path from 'path'
+import { waitForOutput } from '../utils.js'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+export async function test () {
+  await waitForOutput('This message is sent on a private network', 'node', [path.join(__dirname, 'index.js')], {
+    cwd: __dirname
+  })
+}
+

examples/pnet/utils.js

@@ -1,6 +1,6 @@
 'use strict'
-const fs = require('fs')
-const path = require('path')
+const fs from 'fs')
+import path from 'path'
 
 /**
  * mkdirp recursively creates needed folders for the given dir path

examples/protocol-and-stream-muxing/1.js

@@ -1,22 +1,19 @@
-'use strict'
-
-const Libp2p = require('../../')
-const TCP = require('libp2p-tcp')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-
-const pipe = require('it-pipe')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { pipe } from 'it-pipe'
+import { fromString as uint8ArrayFromString } from 'uint8arrays/from-string'
+import { toString as uint8ArrayToString } from 'uint8arrays/to-string'
 
 const createNode = async () => {
-  const node = await Libp2p.create({
+  const node = await createLibp2p({
     addresses: {
       listen: ['/ip4/0.0.0.0/tcp/0']
     },
-    modules: {
-      transport: [TCP],
-      streamMuxer: [MPLEX],
-      connEncryption: [NOISE]
-    }
+    transports: [new TCP()],
+    streamMuxers: [new Mplex()],
+    connectionEncryption: [new Noise()]
   })
 
   await node.start()
@@ -31,7 +28,7 @@ const createNode = async () => {
   ])
 
   // Add node's 2 data to the PeerStore
-  node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
+  await node1.peerStore.addressBook.set(node2.peerId, node2.getMultiaddrs())
 
   // exact matching
   node2.handle('/your-protocol', ({ stream }) => {
@@ -39,7 +36,7 @@ const createNode = async () => {
       stream,
       async function (source) {
         for await (const msg of source) {
-          console.log(msg.toString())
+          console.log(uint8ArrayToString(msg))
         }
       }
     )
@@ -56,7 +53,7 @@ const createNode = async () => {
       stream,
       async function (source) {
         for await (const msg of source) {
-          console.log(msg.toString())
+          console.log(uint8ArrayToString(msg))
         }
       }
     )
@@ -65,7 +62,7 @@ const createNode = async () => {
 
   const { stream } = await node1.dialProtocol(node2.peerId, ['/your-protocol'])
   await pipe(
-    ['my own protocol, wow!'],
+    [uint8ArrayFromString('my own protocol, wow!')],
     stream
   )
 

examples/protocol-and-stream-muxing/2.js

@@ -1,22 +1,19 @@
-'use strict'
-
-const Libp2p = require('../../')
-const TCP = require('libp2p-tcp')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-
-const pipe = require('it-pipe')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { pipe } from 'it-pipe'
+import { fromString as uint8ArrayFromString } from 'uint8arrays/from-string'
+import { toString as uint8ArrayToString } from 'uint8arrays/to-string'
 
 const createNode = async () => {
-  const node = await Libp2p.create({
+  const node = await createLibp2p({
     addresses: {
       listen: ['/ip4/0.0.0.0/tcp/0']
     },
-    modules: {
-      transport: [TCP],
-      streamMuxer: [MPLEX],
-      connEncryption: [NOISE]
-    }
+    transports: [new TCP()],
+    streamMuxers: [new Mplex()],
+    connectionEncryption: [new Noise()]
   })
 
   await node.start()
@@ -31,14 +28,14 @@ const createNode = async () => {
   ])
 
   // Add node's 2 data to the PeerStore
-  node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
+  await node1.peerStore.addressBook.set(node2.peerId, node2.getMultiaddrs())
 
   node2.handle(['/a', '/b'], ({ protocol, stream }) => {
     pipe(
       stream,
       async function (source) {
         for await (const msg of source) {
-          console.log(`from: ${protocol}, msg: ${msg.toString()}`)
+          console.log(`from: ${protocol}, msg: ${uint8ArrayToString(msg)}`)
         }
       }
     )
@@ -46,19 +43,19 @@ const createNode = async () => {
 
   const { stream: stream1 } = await node1.dialProtocol(node2.peerId, ['/a'])
   await pipe(
-    ['protocol (a)'],
+    [uint8ArrayFromString('protocol (a)')],
     stream1
   )
 
   const { stream: stream2 } = await node1.dialProtocol(node2.peerId, ['/b'])
   await pipe(
-    ['protocol (b)'],
+    [uint8ArrayFromString('protocol (b)')],
     stream2
   )
 
   const { stream: stream3 } = await node1.dialProtocol(node2.peerId, ['/b'])
   await pipe(
-    ['another stream on protocol (b)'],
+    [uint8ArrayFromString('another stream on protocol (b)')],
     stream3
   )
 })();

examples/protocol-and-stream-muxing/3.js

@@ -1,23 +1,21 @@
 /* eslint-disable no-console */
-'use strict'
 
-const Libp2p = require('../../')
-const TCP = require('libp2p-tcp')
-const MPLEX = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-
-const pipe = require('it-pipe')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { pipe } from 'it-pipe'
+import { fromString as uint8ArrayFromString } from 'uint8arrays/from-string'
+import { toString as uint8ArrayToString } from 'uint8arrays/to-string'
 
 const createNode = async () => {
-  const node = await Libp2p.create({
+  const node = await createLibp2p({
     addresses: {
       listen: ['/ip4/0.0.0.0/tcp/0']
     },
-    modules: {
-      transport: [TCP],
-      streamMuxer: [MPLEX],
-      connEncryption: [NOISE]
-    }
+    transports: [new TCP()],
+    streamMuxers: [new Mplex()],
+    connectionEncryption: [new Noise()]
   })
 
   await node.start()
@@ -32,14 +30,14 @@ const createNode = async () => {
   ])
 
   // Add node's 2 data to the PeerStore
-  node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
-  
+  await node1.peerStore.addressBook.set(node2.peerId, node2.getMultiaddrs())
+
   node1.handle('/node-1', ({ stream }) => {
     pipe(
       stream,
       async function (source) {
         for await (const msg of source) {
-          console.log(msg.toString())
+          console.log(uint8ArrayToString(msg))
         }
       }
     )
@@ -50,7 +48,7 @@ const createNode = async () => {
       stream,
       async function (source) {
         for await (const msg of source) {
-          console.log(msg.toString())
+          console.log(uint8ArrayToString(msg))
         }
       }
     )
@@ -58,13 +56,13 @@ const createNode = async () => {
 
   const { stream: stream1 } = await node1.dialProtocol(node2.peerId, ['/node-2'])
   await pipe(
-    ['from 1 to 2'],
+    [uint8ArrayFromString('from 1 to 2')],
     stream1
   )
 
   const { stream: stream2 } = await node2.dialProtocol(node1.peerId, ['/node-1'])
   await pipe(
-    ['from 2 to 1'],
+    [uint8ArrayFromString('from 2 to 1')],
     stream2
   )
 })();

examples/protocol-and-stream-muxing/README.md

@@ -11,16 +11,16 @@ Let's see _protocol multiplexing_ in action! You will need the following modules
 After creating the nodes, we need to tell libp2p which protocols to handle.
 
 ```JavaScript
-const pipe = require('it-pipe')
-const { map } = require('streaming-iterables')
-const { toBuffer } = require('it-buffer')
+import { pipe } from 'it-pipe'
+const { map } from 'streaming-iterables')
+const { toBuffer } from 'it-buffer')
 
 // ...
 const node1 = nodes[0]
 const node2 = nodes[1]
 
 // Add node's 2 data to the PeerStore
-node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
+await node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
 
 // Here we are telling libp2p that if someone dials this node to talk with the `/your-protocol`
 // multicodec, the protocol identifier, please call this handler and give it the stream
@@ -102,17 +102,19 @@ Stream multiplexing is an old concept, in fact it happens in many of the layers
 Currently, we have [libp2p-mplex](https://github.com/libp2p/js-libp2p-mplex) and pluging it in is as easy as adding a transport. Let's revisit our libp2p configuration.
 
 ```JavaScript
-const Libp2p = require('libp2p')
-const TCP = require('libp2p-tcp')
-const MPLEX = require('libp2p-mplex')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
 //...
 
 const createNode = () => {
   return Libp2p.create({
-    modules: {
-      transport: [ TCP ],
-      streamMuxer: [ Mplex ]
-    }
+    transports: [
+      new TCP()
+    ],
+    streamMuxers: [
+      new Mplex()
+    ]
   })
 }
 ```

examples/protocol-and-stream-muxing/test-1.js

@@ -0,0 +1,13 @@
+import path from 'path'
+import { waitForOutput } from '../utils.js'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+export async function test () {
+  process.stdout.write('1.js\n')
+
+  await waitForOutput('my own protocol, wow!', 'node', [path.join(__dirname, '1.js')], {
+    cwd: __dirname
+  })
+}

examples/protocol-and-stream-muxing/test-2.js

@@ -0,0 +1,13 @@
+import path from 'path'
+import { waitForOutput } from '../utils.js'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+export async function test () {
+  process.stdout.write('2.js\n')
+
+  await waitForOutput('another stream on protocol (b)', 'node', [path.join(__dirname, '2.js')], {
+    cwd: __dirname
+  })
+}

examples/protocol-and-stream-muxing/test-3.js

@@ -0,0 +1,13 @@
+import path from 'path'
+import { waitForOutput } from '../utils.js'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+export async function test () {
+  process.stdout.write('3.js\n')
+
+  await waitForOutput('from 2 to 1', 'node', [path.join(__dirname, '3.js')], {
+    cwd: __dirname
+  })
+}

examples/protocol-and-stream-muxing/test.js

@@ -0,0 +1,9 @@
+import { test as test1 } from './test-1.js'
+import { test as test2 } from './test-2.js'
+import { test as test3 } from './test-3.js'
+
+export async function test() {
+  await test1()
+  await test2()
+  await test3()
+}

examples/pubsub/1.js

@@ -1,25 +1,22 @@
 /* eslint-disable no-console */
-'use strict'
 
-const Libp2p = require('../../')
-const TCP = require('libp2p-tcp')
-const Mplex = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-const Gossipsub = require('libp2p-gossipsub')
-const uint8ArrayFromString = require('uint8arrays/from-string')
-const uint8ArrayToString = require('uint8arrays/to-string')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { FloodSub } from '@libp2p/floodsub'
+import { fromString as uint8ArrayFromString } from 'uint8arrays/from-string'
+import { toString as uint8ArrayToString } from 'uint8arrays/to-string'
 
 const createNode = async () => {
-  const node = await Libp2p.create({
+  const node = await createLibp2p({
     addresses: {
       listen: ['/ip4/0.0.0.0/tcp/0']
     },
-    modules: {
-      transport: [TCP],
-      streamMuxer: [Mplex],
-      connEncryption: [NOISE],
-      pubsub: Gossipsub
-    }
+    transports: [new TCP()],
+    streamMuxers: [new Mplex()],
+    connectionEncryption: [new Noise()],
+    pubsub: new FloodSub()
   })
 
   await node.start()
@@ -35,21 +32,24 @@ const createNode = async () => {
   ])
 
   // Add node's 2 data to the PeerStore
-  node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
+  await node1.peerStore.addressBook.set(node2.peerId, node2.getMultiaddrs())
   await node1.dial(node2.peerId)
 
-  node1.pubsub.on(topic, (msg) => {
-    console.log(`node1 received: ${uint8ArrayToString(msg.data)}`)
+  node1.pubsub.subscribe(topic)
+  node1.pubsub.addEventListener('message', (evt) => {
+    console.log(`node1 received: ${uint8ArrayToString(evt.detail.data)} on topic ${evt.detail.topic}`)
   })
-  await node1.pubsub.subscribe(topic)
 
-  node2.pubsub.on(topic, (msg) => {
-    console.log(`node2 received: ${uint8ArrayToString(msg.data)}`)
+  // Will not receive own published messages by default
+  node2.pubsub.subscribe(topic)
+  node2.pubsub.addEventListener('message', (evt) => {
+    console.log(`node2 received: ${uint8ArrayToString(evt.detail.data)} on topic ${evt.detail.topic}`)
   })
-  await node2.pubsub.subscribe(topic)
 
   // node2 publishes "news" every second
   setInterval(() => {
-    node2.pubsub.publish(topic, uint8ArrayFromString('Bird bird bird, bird is the word!'))
+    node2.pubsub.publish(topic, uint8ArrayFromString('Bird bird bird, bird is the word!')).catch(err => {
+      console.error(err)
+    })
   }, 1000)
 })()

examples/pubsub/README.md

@@ -8,6 +8,10 @@ We've seen many interesting use cases appear with this, here are some highlights
 - [IPFS PubSub (using libp2p-floodsub) for IoT](https://www.youtube.com/watch?v=qLpM5pBDGiE).
 - [Real Time distributed Applications](https://www.youtube.com/watch?v=vQrbxyDPSXg)
 
+## 0. Set up the example
+
+Before moving into the examples, you should run `npm install` on the top level `js-libp2p` folder, in order to install all the dependencies needed for this example. In addition, you will need to install the example related dependencies by doing `cd examples && npm install`. Once the install finishes, you should move into the example folder with `cd pubsub`.
+
 ## 1. Setting up a simple PubSub network on top of libp2p
 
 For this example, we will use MulticastDNS for automatic Peer Discovery. This example is based the previous examples found in [Discovery Mechanisms](../discovery-mechanisms). You can find the complete version at [1.js](./1.js).
@@ -17,49 +21,57 @@ Using PubSub is super simple, you only need to provide the implementation of you
 First, let's update our libp2p configuration with a pubsub implementation.
 
 ```JavaScript
-const Libp2p = require('libp2p')
-const Gossipsub = require('libp2p-gossipsub')
+import { createLibp2p } from 'libp2p'
+import { Gossipsub } from 'libp2p-gossipsub'
 
-const node = await Libp2p.create({
+const node = await createLibp2p({
   addresses: {
     listen: ['/ip4/0.0.0.0/tcp/0']
   },
-  modules: {
-    transport: [ TCP ],
-    streamMuxer: [ Mplex ],
-    connEncryption: [ NOISE ],
-    // we add the Pubsub module we want
-    pubsub: Gossipsub
-  }
+  transports: [
+    new TCP()
+  ],
+  streamMuxers: [
+    new Mplex()
+  ],
+  connectionEncryption: [
+    new Noise()
+  ],
+  // we add the Pubsub module we want
+  pubsub: new Gossipsub()
 })
 ```
 
 Once that is done, we only need to create a few libp2p nodes, connect them and everything is ready to start using pubsub.
 
 ```JavaScript
+const { fromString } from 'uint8arrays/from-string')
+const { toString } from 'uint8arrays/to-string')
 const topic = 'news'
 
 const node1 = nodes[0]
 const node2 = nodes[1]
 
 // Add node's 2 data to the PeerStore
-node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
-
+await node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
 await node1.dial(node2.peerId)
 
 node1.pubsub.on(topic, (msg) => {
-  console.log(`node1 received: ${uint8ArrayToString(msg.data)}`)
+  console.log(`node1 received: ${toString(msg.data)}`)
 })
 await node1.pubsub.subscribe(topic)
 
+// Will not receive own published messages by default
 node2.pubsub.on(topic, (msg) => {
-  console.log(`node2 received: ${uint8ArrayToString(msg.data)}`)
+  console.log(`node2 received: ${toString(msg.data)}`)
 })
 await node2.pubsub.subscribe(topic)
 
 // node2 publishes "news" every second
 setInterval(() => {
-  node2.pubsub.publish(topic, uint8ArrayFromString('Bird bird bird, bird is the word!'))
+  node2.pubsub.publish(topic, fromString('Bird bird bird, bird is the word!')).catch(err => {
+    console.error(err)
+  })
 }, 1000)
 ```
 
@@ -68,25 +80,34 @@ The output of the program should look like:
 ```
 > node 1.js
 connected to QmWpvkKm6qHLhoxpWrTswY6UMNWDyn8hN265Qp9ZYvgS82
-node2 received: Bird bird bird, bird is the word!
 node1 received: Bird bird bird, bird is the word!
-node2 received: Bird bird bird, bird is the word!
 node1 received: Bird bird bird, bird is the word!
 ```
 
-You can change the pubsub `emitSelf` option if you don't want the publishing node to receive its own messages.
+You can change the pubsub `emitSelf` option if you want the publishing node to receive its own messages.
 
 ```JavaScript
 const defaults = {
   config: {
     pubsub: {
       enabled: true,
-      emitSelf: false
+      emitSelf: true
     }
   }
 }
 ```
 
+The output of the program should look like:
+
+```
+> node 1.js
+connected to QmWpvkKm6qHLhoxpWrTswY6UMNWDyn8hN265Qp9ZYvgS82
+node1 received: Bird bird bird, bird is the word!
+node2 received: Bird bird bird, bird is the word!
+node1 received: Bird bird bird, bird is the word!
+node2 received: Bird bird bird, bird is the word!
+```
+
 ## 2. Future work
 
 libp2p/IPFS PubSub is enabling a whole set of Distributed Real Time applications using CRDT (Conflict-Free Replicated Data Types). It is still going through heavy research (and hacking) and we invite you to join the conversation at [research-CRDT](https://github.com/ipfs/research-CRDT). Here is a list of some of the exciting examples:

examples/pubsub/message-filtering/1.js

@@ -1,25 +1,22 @@
 /* eslint-disable no-console */
-'use strict'
 
-const Libp2p = require('../../../')
-const TCP = require('libp2p-tcp')
-const Mplex = require('libp2p-mplex')
-const { NOISE } = require('libp2p-noise')
-const Gossipsub = require('libp2p-gossipsub')
-const uint8ArrayFromString = require('uint8arrays/from-string')
-const uint8ArrayToString = require('uint8arrays/to-string')
+import { createLibp2p } from 'libp2p'
+import { TCP } from '@libp2p/tcp'
+import { Mplex } from '@libp2p/mplex'
+import { Noise } from '@chainsafe/libp2p-noise'
+import { FloodSub } from '@libp2p/floodsub'
+import { fromString as uint8ArrayFromString } from 'uint8arrays/from-string'
+import { toString as uint8ArrayToString } from 'uint8arrays/to-string'
 
 const createNode = async () => {
-  const node = await Libp2p.create({
+  const node = await createLibp2p({
     addresses: {
       listen: ['/ip4/0.0.0.0/tcp/0']
     },
-    modules: {
-      transport: [TCP],
-      streamMuxer: [Mplex],
-      connEncryption: [NOISE],
-      pubsub: Gossipsub
-    }
+    transports: [new TCP()],
+    streamMuxers: [new Mplex()],
+    connectionEncryption: [new Noise()],
+    pubsub: new FloodSub()
   })
 
   await node.start()
@@ -36,27 +33,26 @@ const createNode = async () => {
   ])
 
   // node1 conect to node2 and node2 conect to node3
-  node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
+  await node1.peerStore.addressBook.set(node2.peerId, node2.getMultiaddrs())
   await node1.dial(node2.peerId)
 
-  node2.peerStore.addressBook.set(node3.peerId, node3.multiaddrs)
+  await node2.peerStore.addressBook.set(node3.peerId, node3.getMultiaddrs())
   await node2.dial(node3.peerId)
 
   //subscribe
-  node1.pubsub.on(topic, (msg) => {
-    console.log(`node1 received: ${uint8ArrayToString(msg.data)}`)
+  node1.pubsub.addEventListener(topic, (evt) => {
+    // Will not receive own published messages by default
+    console.log(`node1 received: ${uint8ArrayToString(evt.detail.data)}`)
   })
-  await node1.pubsub.subscribe(topic)
+  node1.pubsub.subscribe(topic)
 
-  node2.pubsub.on(topic, (msg) => {
-    console.log(`node2 received: ${uint8ArrayToString(msg.data)}`)
+  node2.pubsub.addEventListener(topic, (evt) => {
+    console.log(`node2 received: ${uint8ArrayToString(evt.detail.data)}`)
   })
-  await node2.pubsub.subscribe(topic)
 
-  node3.pubsub.on(topic, (msg) => {
-    console.log(`node3 received: ${uint8ArrayToString(msg.data)}`)
+  node3.pubsub.addEventListener(topic, (evt) => {
+    console.log(`node3 received: ${uint8ArrayToString(evt.detail.data)}`)
   })
-  await node3.pubsub.subscribe(topic)
 
   const validateFruit = (msgTopic, msg) => {
     const fruit = uint8ArrayToString(msg.data)
@@ -78,7 +74,9 @@ const createNode = async () => {
   // car is not a fruit !
   setInterval(() => {
     console.log('############## fruit ' + myFruits[count] + ' ##############')
-    node1.pubsub.publish(topic, uint8ArrayFromString(myFruits[count]))
+    node1.pubsub.publish(topic, uint8ArrayFromString(myFruits[count])).catch(err => {
+      console.info(err)
+    })
     count++
     if (count == myFruits.length) {
       count = 0

examples/pubsub/message-filtering/README.md

@@ -7,19 +7,23 @@ To prevent undesired data from being propagated on the network, we can apply a f
 First, let's update our libp2p configuration with a pubsub implementation.
 
 ```JavaScript
-const Libp2p = require('libp2p')
-const Gossipsub = require('libp2p-gossipsub')
+import { createLibp2p } from 'libp2p'
+import { Gossipsub } from 'libp2p-gossipsub'
 
-const node = await Libp2p.create({
+const node = await createLibp2p({
   addresses: {
     listen: ['/ip4/0.0.0.0/tcp/0']
   },
-  modules: {
-    transport: [ TCP ],
-    streamMuxer: [ Mplex ],
-    connEncryption: [ NOISE ],
-    pubsub: Gossipsub
-  }
+  transports: [
+    new TCP()
+  ],
+  streamMuxers: [
+    new Mplex()
+  ],
+  connectionEncryption: [
+    new Noise()
+  ],
+  pubsub: new Gossipsub()
 })
 ```
 
@@ -32,10 +36,10 @@ const [node1, node2, node3] = await Promise.all([
   createNode(),
 ])
 
-node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
+await node1.peerStore.addressBook.set(node2.peerId, node2.multiaddrs)
 await node1.dial(node2.peerId)
 
-node2.peerStore.addressBook.set(node3.peerId, node3.multiaddrs)
+await node2.peerStore.addressBook.set(node3.peerId, node3.multiaddrs)
 await node2.dial(node3.peerId)
 ```
 
@@ -84,7 +88,9 @@ const myFruits = ['banana', 'apple', 'car', 'orange'];
 
 setInterval(() => {
   console.log('############## fruit ' + myFruits[count] + ' ##############')
-  node1.pubsub.publish(topic, new TextEncoder().encode(myFruits[count]))
+  node1.pubsub.publish(topic, new TextEncoder().encode(myFruits[count])).catch(err => {
+    console.error(err)
+  })
   count++
   if (count == myFruits.length) {
     count = 0
@@ -97,15 +103,12 @@ Result
 ```
 > node 1.js
 ############## fruit banana ##############
-node1 received: banana
 node2 received: banana
 node3 received: banana
 ############## fruit apple ##############
-node1 received: apple
 node2 received: apple
 node3 received: apple
 ############## fruit car ##############
-node1 received: car
 ############## fruit orange ##############
 node1 received: orange
 node2 received: orange

examples/pubsub/message-filtering/test.js

@@ -0,0 +1,66 @@
+import path from 'path'
+import execa from 'execa'
+import pDefer from 'p-defer'
+import { toString as uint8ArrayToString } from 'uint8arrays/to-string'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+const stdout = [
+  {
+    topic: 'banana',
+    messageCount: 2
+  },
+  {
+    topic: 'apple',
+    messageCount: 2
+  },
+  {
+    topic: 'car',
+    messageCount: 0
+  },
+  {
+    topic: 'orange',
+    messageCount: 2
+  },
+]
+
+export async function test () {
+  const defer = pDefer()
+  let topicCount = 0
+  let topicMessageCount = 0
+
+  process.stdout.write('message-filtering/1.js\n')
+
+  const proc = execa('node', [path.join(__dirname, '1.js')], {
+    cwd: path.resolve(__dirname),
+    all: true
+  })
+
+  proc.all.on('data', async (data) => {
+    // End
+    if (topicCount === stdout.length) {
+      defer.resolve()
+      proc.all.removeAllListeners('data')
+    }
+
+    process.stdout.write(data)
+    const line = uint8ArrayToString(data)
+
+    if (stdout[topicCount] && line.includes(stdout[topicCount].topic)) {
+      // Validate previous number of messages
+      if (topicCount > 0 && topicMessageCount > stdout[topicCount - 1].messageCount) {
+        defer.reject()
+        throw new Error(`topic ${stdout[topicCount - 1].topic} had ${topicMessageCount} messages instead of ${stdout[topicCount - 1].messageCount}`)
+      }
+
+      topicCount++
+      topicMessageCount = 0
+    } else {
+      topicMessageCount++
+    }
+  })
+
+  await defer.promise
+  proc.kill()
+}

examples/pubsub/test-1.js

@@ -0,0 +1,29 @@
+import path from 'path'
+import execa from 'execa'
+import pDefer from 'p-defer'
+import { toString as uint8ArrayToString } from 'uint8arrays/to-string'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+export async function test () {
+  const defer = pDefer()
+  process.stdout.write('1.js\n')
+
+  const proc = execa('node', [path.join(__dirname, '1.js')], {
+    cwd: path.resolve(__dirname),
+    all: true
+  })
+
+  proc.all.on('data', async (data) => {
+    process.stdout.write(data)
+    const line = uint8ArrayToString(data)
+
+    if (line.includes('node1 received: Bird bird bird, bird is the word!')) {
+      defer.resolve()
+    }
+  })
+
+  await defer.promise
+  proc.kill()
+}

examples/pubsub/test.js

@@ -0,0 +1,7 @@
+import { test as test1 } from './test-1.js'
+import { test as testMessageFiltering } from './message-filtering/test.js'
+
+export async function test() {
+  await test1()
+  await testMessageFiltering()
+}

examples/test-all.js

@@ -0,0 +1,35 @@
+
+process.on('unhandedRejection', (err) => {
+  console.error(err)
+
+  process.exit(1)
+})
+
+import path from 'path'
+import fs from 'fs'
+import {
+  waitForOutput
+} from './utils.js'
+import { fileURLToPath } from 'url'
+
+const __dirname = path.dirname(fileURLToPath(import.meta.url))
+
+async function testAll () {
+  for (const dir of fs.readdirSync(__dirname)) {
+    if (dir === 'node_modules' || dir === 'tests_output') {
+      continue
+    }
+
+    const stats = fs.statSync(path.join(__dirname, dir))
+
+    if (!stats.isDirectory()) {
+      continue
+    }
+
+    await waitForOutput('npm info ok', 'npm', ['--loglevel', 'info', 'run', 'test', '--', dir], {
+      cwd: __dirname
+    })
+  }
+}
+
+testAll()