* manually swagging
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* three definitions with polymorphism
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* added blockchain and block
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* low quality generation, commit, block_response and validators
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* genesis and consensus states endpoints
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* fix indentation
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* consensus parameters
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* fix indentation
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* add height to consensus parameters endpoint
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* unconfirmed_txs and num_unconfirmed_txs
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* add missing query parameter
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* add ABCI queries
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* added index document for swagger documentation
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* add missing routes
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* contract tests added on CCI
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* contract tests job should be in the test suite
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* simplify requirements to test
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* typo
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* build is a prerequisite to start localnet
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* reduce nodejs size, move goodman to get_tools, add docs, fix comments
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* Update scripts/get_tools.sh
That's cleaner, thanks!
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* xz not supported by cci image, let's keep it simple
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* REMOVE-indirect debug of CCI paths
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* dirty experiment, volume is empty but binary has been produced
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* dirty experiment, volume is empty but binary has been produced
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* dirty experiment going on
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* locally works, CCI have difficulties with second layaer containers volumes
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* restore experiment, use machine instead of docker for contract tests
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* simplify a bit
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* rollback on machine golang
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* Document the changes
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* Changelog
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* comments
Signed-off-by: Karoly Albert Szabo <szabo.karoly.a@gmail.com>
* init of (2/2) common errors
* Remove instances of cmn.Error (2/2)
- Replace usage of cmnError and errorWrap
- ref #3862
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* comment wording
* simplify IsErrXXX functions
* log panic along with stopping the MConnection
This PR is related to #3107 and a continuation of #3351
It is important to emphasise that in the privval original design, client/server and listening/dialing roles are inverted and do not follow a conventional interaction.
Given two hosts A and B:
Host A is listener/client
Host B is dialer/server (contains the secret key)
When A requires a signature, it needs to wait for B to dial in before it can issue a request.
A only accepts a single connection and any failure leads to dropping the connection and waiting for B to reconnect.
The original rationale behind this design was based on security.
Host B only allows outbound connections to a list of whitelisted hosts.
It is not possible to reach B unless B dials in. There are no listening/open ports in B.
This PR results in the following changes:
Refactors ping/heartbeat to avoid previously existing race conditions.
Separates transport (dialer/listener) from signing (client/server) concerns to simplify workflow.
Unifies and abstracts away the differences between unix and tcp sockets.
A single signer endpoint implementation unifies connection handling code (read/write/close/connection obj)
The signer request handler (server side) is customizable to increase testability.
Updates and extends unit tests
A high level overview of the classes is as follows:
Transport (endpoints): The following classes take care of establishing a connection
SignerDialerEndpoint
SignerListeningEndpoint
SignerEndpoint groups common functionality (read/write/timeouts/etc.)
Signing (client/server): The following classes take care of exchanging request/responses
SignerClient
SignerServer
This PR also closes#3601
Commits:
* refactoring - work in progress
* reworking unit tests
* Encapsulating and fixing unit tests
* Improve tests
* Clean up
* Fix/improve unit tests
* clean up tests
* Improving service endpoint
* fixing unit test
* fix linter issues
* avoid invalid cache values (improve later?)
* complete implementation
* wip
* improved connection loop
* Improve reconnections + fixing unit tests
* addressing comments
* small formatting changes
* clean up
* Update node/node.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_client.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_client_test.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* check during initialization
* dropping connecting when writing fails
* removing break
* use t.log instead
* unifying and using cmn.GetFreePort()
* review fixes
* reordering and unifying drop connection
* closing instead of signalling
* refactored service loop
* removed superfluous brackets
* GetPubKey can return errors
* Revert "GetPubKey can return errors"
This reverts commit 68c06f19b4650389d7e5ab1659b318889028202c.
* adding entry to changelog
* Update CHANGELOG_PENDING.md
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_client.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_dialer_endpoint.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_dialer_endpoint.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_dialer_endpoint.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_dialer_endpoint.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* Update privval/signer_listener_endpoint_test.go
Co-Authored-By: jleni <juan.leni@zondax.ch>
* updating node.go
* review fixes
* fixes linter
* fixing unit test
* small fixes in comments
* addressing review comments
* addressing review comments 2
* reverting suggestion
* Update privval/signer_client_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update privval/signer_client_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* Update privval/signer_listener_endpoint_test.go
Co-Authored-By: Anton Kaliaev <anton.kalyaev@gmail.com>
* do not expose brokenSignerDialerEndpoint
* clean up logging
* unifying methods
shorten test time
signer also drops
* reenabling pings
* improving testability + unit test
* fixing go fmt + unit test
* remove unused code
* Addressing review comments
* simplifying connection workflow
* fix linter/go import issue
* using base service quit
* updating comment
* Simplifying design + adjusting names
* fixing linter issues
* refactoring test harness + fixes
* Addressing review comments
* cleaning up
* adding additional error check
Add gocritic as a linter
The linting is not complete, but should i complete in this PR or in a following.
23 files have been touched so it may be better to do in a following PR
Commits:
* Add gocritic to linting
- Added gocritic to linting
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* gocritic
* pr comments
* remove switch in cmdBatch
* Renamed wire.go to codec.go
- Wire was the previous name of amino
- Codec describes the file better than `wire` & `amino`
Signed-off-by: Marko Baricevic <marbar3778@yahoo.com>
* ide error
* rename amino.go to codec.go
* go routines in blockchain reactor
* Added reference to the go routine diagram
* Initial commit
* cleanup
* Undo testing_logger change, committed by mistake
* Fix the test loggers
* pulled some fsm code into pool.go
* added pool tests
* changes to the design
added block requests under peer
moved the request trigger in the reactor poolRoutine, triggered now by a ticker
in general moved everything required for making block requests smarter in the poolRoutine
added a simple map of heights to keep track of what will need to be requested next
added a few more tests
* send errors to FSM in a different channel than blocks
send errors (RemovePeer) from switch on a different channel than the
one receiving blocks
renamed channels
added more pool tests
* more pool tests
* lint errors
* more tests
* more tests
* switch fast sync to new implementation
* fixed data race in tests
* cleanup
* finished fsm tests
* address golangci comments :)
* address golangci comments :)
* Added timeout on next block needed to advance
* updating docs and cleanup
* fix issue in test from previous cleanup
* cleanup
* Added termination scenarios, tests and more cleanup
* small fixes to adr, comments and cleanup
* Fix bug in sendRequest()
If we tried to send a request to a peer not present in the switch, a
missing continue statement caused the request to be blackholed in a peer
that was removed and never retried.
While this bug was manifesting, the reactor kept asking for other
blocks that would be stored and never consumed. Added the number of
unconsumed blocks in the math for requesting blocks ahead of current
processing height so eventually there will be no more blocks requested
until the already received ones are consumed.
* remove bpPeer's didTimeout field
* Use distinct err codes for peer timeout and FSM timeouts
* Don't allow peers to update with lower height
* review comments from Ethan and Zarko
* some cleanup, renaming, comments
* Move block execution in separate goroutine
* Remove pool's numPending
* review comments
* fix lint, remove old blockchain reactor and duplicates in fsm tests
* small reorg around peer after review comments
* add the reactor spec
* verify block only once
* review comments
* change to int for max number of pending requests
* cleanup and godoc
* Add configuration flag fast sync version
* golangci fixes
* fix config template
* move both reactor versions under blockchain
* cleanup, golint, renaming stuff
* updated documentation, fixed more golint warnings
* integrate with behavior package
* sync with master
* gofmt
* add changelog_pending entry
* move to improvments
* suggestion to changelog entry
* Allow testnet hostnames to be overridden
This allows one to specify the `--hostname` flag multiple times, each
time providing an additional custom hostname for a respective peer
(validator or non-validator). This overrides any of the
`--hostname-prefix` or `--starting-ip-address` flags.
The string array approach is taken instead of the string slice approach
(see the pflag docs:
https://godoc.org/github.com/spf13/pflag#StringArray) because the string
slice approach (a comma-separated string) doesn't allow for cleaner
multi-line BASH scripts - where this feature is intended to be used.
* Reorder conditional for clarity with simpler earlier return
* Allow for specifying peer hostname suffix
* Quote values in help strings for greater clarity
* Fix command switch
* Add CHANGELOG_PENDING entry for PR
* Allow for unique monikers
The current approach to generating monikers for testnet nodes assigns
the local hostname of the machine on which the testnet config was
generated to all nodes. This results in the same moniker for each and
every node.
This commit makes use of the supplied `--hostname-prefix` and
`--hostname-suffix`, or `--hostname` parameters to generate unique
monikers for each node. Alternatively, another parameter
(`--random-monikers`) allows one to forcibly override all of the other
options with random hexadecimal strings.
* Update CHANGELOG_PENDING entry for new command line switch
1."abci_query": rpcserver.NewRPCFunc(c.ABCIQuery, "path,data,prove")
"validators": rpcserver.NewRPCFunc(c.Validators, "height"),
the parameters and function do not match, cause index out of range error.
2. the prove of query is forced to be true, while default option is false.
3. fix the wrong key of merkle
This issue is related to #3107
This is a first renaming/refactoring step before reworking and removing heartbeats.
As discussed with @Liamsi , we preferred to go for a couple of independent and separate PRs to simplify review work.
The changes:
Help to clarify the relation between the validator and remote signer endpoints
Differentiate between timeouts and deadlines
Prepare to encapsulate networking related code behind RemoteSigner in the next PR
My intention is to separate and encapsulate the "network related" code from the actual signer.
SignerRemote ---(uses/contains)--> SignerValidatorEndpoint <--(connects to)--> SignerServiceEndpoint ---> SignerService (future.. not here yet but would like to decouple too)
All reconnection/heartbeat/whatever code goes in the endpoints. Signer[Remote/Service] do not need to know about that.
I agree Endpoint may not be the perfect name. I tried to find something "Go-ish" enough. It is a common name in go-kit, kubernetes, etc.
Right now:
SignerValidatorEndpoint:
handles the listener
contains SignerRemote
Implements the PrivValidator interface
connects and sets a connection object in a contained SignerRemote
delegates PrivValidator some calls to SignerRemote which in turn uses the conn object that was set externally
SignerRemote:
Implements the PrivValidator interface
read/writes from a connection object directly
handles heartbeats
SignerServiceEndpoint:
Does most things in a single place
delegates to a PrivValidator IIRC.
* cleanup
* Refactoring step 1
* Refactoring step 2
* move messages to another file
* mark for future work / next steps
* mark deprecated classes in docs
* Fix linter problems
* additional linter fixes
* libs/common: TrapSignal accepts logger as a first parameter
and does not block anymore
* previously it was dumping "captured ..." msg to os.Stdout
* TrapSignal should not be responsible for blocking thread of execution
Refs #3238
* exit with zero (0) code upon receiving SIGTERM/SIGINT
Refs #3238
* fix formatting in docs/app-dev/abci-cli.md
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* fix formatting in docs/app-dev/abci-cli.md
Co-Authored-By: melekes <anton.kalyaev@gmail.com>
* changelog: use issue number instead of PR number
* follow up to #3291
- rpc/test/helpers.go add StopTendermint(node) func
- remove ensureDir(filepath.Dir(walFile), 0700)
- mempool/mempool_test.go add type cleanupFunc func()
* cmd/show_validator: wrap err to make it more clear
* types.NewCommit
* use types.NewCommit everywhere
* fix log in unsafe_reset
* memoize height and round in constructor
* notes about deprecating toVote
* bring back memoizeHeightRound
* Close and recreate a RemoteSigner on err
* Update changelog
* Address Anton's comments / suggestions:
- update changelog
- restart TCPVal
- shut down on `ErrUnexpectedResponse`
* re-init remote signer client with fresh connection if Ping fails
- add/update TODOs in secret connection
- rename tcp.go -> tcp_client.go, same with ipc to clarify their purpose
* account for `conn returned by waitConnection can be `nil`
- also add TODO about RemoteSigner conn field
* Tests for retrying: IPC / TCP
- shorter info log on success
- set conn and use it in tests to close conn
* Tests for retrying: IPC / TCP
- shorter info log on success
- set conn and use it in tests to close conn
- add rwmutex for conn field in IPC
* comments and doc.go
* fix ipc tests. fixes#2677
* use constants for tests
* cleanup some error statements
* fixes#2784, race in tests
* remove print statement
* minor fixes from review
* update comment on sts spec
* cosmetics
* p2p/conn: add failing tests
* p2p/conn: make SecretConnection thread safe
* changelog
* IPCVal signer refactor
- use a .reset() method
- don't use embedded RemoteSignerClient
- guard RemoteSignerClient with mutex
- drop the .conn
- expose Close() on RemoteSignerClient
* apply IPCVal refactor to TCPVal
* remove mtx from RemoteSignerClient
* consolidate IPCVal and TCPVal, fixes#3104
- done in tcp_client.go
- now called SocketVal
- takes a listener in the constructor
- make tcpListener and unixListener contain all the differences
* delete ipc files
* introduce unix and tcp dialer for RemoteSigner
* rename files
- drop tcp_ prefix
- rename priv_validator.go to file.go
* bring back listener options
* fix node
* fix priv_val_server
* fix node test
* minor cleanup and comments
* split immutable and mutable parts of priv_validator.json
* fix bugs
* minor changes
* retrig test
* delete scripts/wire2amino.go
* fix test
* fixes from review
* privval: remove mtx
* rearrange priv_validator.go
* upgrade path
* write tests for the upgrade
* fix for unsafe_reset_all
* add test
* add reset test
* config: cors options are arrays of strings, not strings
Fixes#2980
* docs: update tendermint-core/configuration.html page
* set allow_duplicate_ip to false
* in `tendermint testnet`, set allow_duplicate_ip to true
Refs #2712
* fixes after Ismail's review
* require block.Time of the fist block to be genesis time
Refs #2587:
```
We only start validating block.Time when Height > 1, because there is no
commit to compute the median timestamp from for the first block. This
means a faulty proposer could make the first block with whatever time
they want.
Instead, we should require the timestamp of block 1 to match the genesis
time.
I discovered this while refactoring the ValidateBlock tests to be
table-driven while working on tests for #2560.
```
* do not accept blocks with negative height
* update changelog and spec
* nanos precision for test genesis time
* Fix failing test (#2607)
* Implement issues 2386: add synchronization in lite verify and change all Certify to Verify
* Replace make(chan struct{}, 0) with make(chan struct{})
* Parameterize memroy cache size and add concurrent test
* Refactor import order
* add missing options to config.toml template and docs
Refs #2232
* config#ValidateBasic
Refs #2232
* [config] timeouts as time.Duration, not ints
Why:
- native type provides better guarantees than ", in ms" comment (harder
to shoot yourself in the leg)
- flexibility: you can change units
* stop node upon receiving SIGTERM or CTRL-Ceven during genesis sleep by setting up interrupt before starting a node
Closes#2434
* call Start, not OnStart when starting a component to avoid:
```
E[09-24|10:13:15.805] Not stopping PubSub -- have not been started yet module=pubsub impl=PubSub
```
being printed on exit
Currently the top level directory contains basically all of the code
for the crypto package. This PR moves the crypto code into submodules
in a similar manner to what `golang/x/crypto` does. This improves code
organization.
Ref discussion: https://github.com/tendermint/tendermint/pull/1966Closes#1956
* config: rename skip_upnp to upnp
Change default option to enable upnp.
Closes#1806
* doc updates
- fix comment and set UPNP to false in TestP2PConfig
- add UPNP to config template
- update changelog
* Switch ports 466xx to be 266xx
This is done so the default ports aren't in the linux kernel's default ephemeral port range.
* Update ABCI import
* Bump cache on circleci
* Get more verbose output for debugging
* Bump abci dependency
* Fix accidental change of a block header's hash
* pin abci release
