* Update soketto and enable deflate extension.
* libp2p-deflate and libp2p-websocket share flate2.
Due to the way feature resolution works in cargo today, the `deflate`
feature of `soketto` will include `flate2` with feature `zlib` which is
then also active for the `flate2` that `libp2p-deflate` depends on. This
leads to compilation failures for WASM targets. This PR therefore moves
libp2p-deflate to the crates which are not available on WASM.
* Begin reimplementing the websocket transport.
* Add TLS support.
* Add support for redirects during handshake.
* Cosmetics.
* Remove unused error cases in tls module.
Left-overs from a previous implementation.
* No libp2p-websocket for wasm targets.
* Change tls::Config to make the server optional.
* Update transports/websocket/src/lib.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Duplicate config methods.
As per PR review feedback.
* Integrate use of identity keys into libp2p-noise.
In order to make libp2p-noise usable with a `Swarm`, which requires a
`Transport::Output` that is a pair of a peer ID and an implementation
of `StreamMuxer`, it is necessary to bridge the gap between static
DH public keys and public identity keys from which peer IDs are derived.
Because the DH static keys and the identity keys need not be
related, it is thus generally necessary that the public identity keys are
exchanged as part of the Noise handshake, which the Noise protocol
accomodates for through the use of handshake message payloads.
The implementation of the existing (IK, IX, XX) handshake patterns is thus
changed to send the public identity keys in the handshake payloads.
Additionally, to facilitate the use of any identity keypair with Noise
handshakes, the static DH public keys are signed using the identity
keypairs and the signatures sent alongside the public identity key
in handshake payloads, unless the static DH public key is "linked"
to the public identity key by other means, e.g. when an Ed25519 identity
keypair is (re)used as an X25519 keypair.
* libp2p-noise doesn't build for wasm.
Thus the development transport needs to be still constructed with secio
for transport security when building for wasm.
* Documentation tweaks.
* For consistency, avoid wildcard enum imports.
* For consistency, avoid wildcard enum imports.
* Slightly simplify io:🤝:State::finish.
* Simplify creation of 2-byte arrays.
* Remove unnecessary cast and obey 100 char line limit.
* Update protocols/noise/src/protocol.rs
Co-Authored-By: romanb <romanb@users.noreply.github.com>
* Address more review comments.
* Cosmetics
* Cosmetics
* Give authentic DH keypairs a distinct type.
This has a couple of advantages:
* Signing the DH public key only needs to happen once, before
creating a `NoiseConfig` for an authenticated handshake.
* The identity keypair only needs to be borrowed and can be
dropped if it is not used further outside of the Noise
protocol, since it is no longer needed during Noise handshakes.
* It is explicit in the construction of a `NoiseConfig` for
a handshake pattern, whether it operates with a plain `Keypair`
or a keypair that is authentic w.r.t. a public identity key
and future handshake patterns may be built with either.
* The function signatures for constructing `NoiseConfig`s for
handshake patterns are simplified and a few unnecessary trait
bounds removed.
* Post-merge corrections.
* Add note on experimental status of libp2p-noise.
* muxing: adds an error type to streammuxer
* Update examples/chat.rs
Co-Authored-By: montekki <fedor.sakharov@gmail.com>
* make the trait error type bound to io error
The functionality is available through `Multiaddr::replace`.
What we currently call "nat_traversal" is merley a replacement of an IP
address prefix in a `Multiaddr`, hence it can be done directly on
`Multiaddr` values instead of having to go through a `Transport`.
In addition this PR consolidates changes made to `Multiaddr` in
previous commits which resulted in lots of deprecations. It adds some
more (see below for the complete list of API changes) and removes all
deprecated functionality, requiring a minor version bump.
Here are the changes to `multiaddr` compared to the currently published
version:
1. Removed `into_bytes` (use `to_vec` instead).
2. Renamed `to_bytes` to `to_vec`.
3. Removed `from_bytes` (use the `TryFrom` impl instead).
4. Added `with_capacity`.
5. Added `len`.
6. Removed `as_slice` (use `AsRef` impl instead).
7. Removed `encapsulate` (use `push` or `with` instead).
8. Removed `decapsulate` (use `pop` instead).
9. Renamed `append` to `push`.
10. Added `with`.
11. Added `replace`.
12. Removed `ToMultiaddr` trait (use `TryFrom` instead).
* libp2p-ping improvements.
* re #950: Removes use of the `OneShotHandler`, but still sending each
ping over a new substream, as seems to be intentional since #828.
* re #842: Adds an integration test that exercises the ping behaviour through
a Swarm, requiring the RTT to be below a threshold. This requires disabling
Nagle's algorithm as it can interact badly with delayed ACKs (and has been
observed to do so in the context of the new ping example and integration test).
* re #864: Control of the inbound and outbound (sub)stream protocol upgrade
timeouts has been moved from the `NodeHandlerWrapperBuilder` to the
`ProtocolsHandler`. That may also alleviate the need for a custom timeout
on an `OutboundSubstreamRequest` as a `ProtocolsHandler` is now free to
adjust these timeouts over time.
Other changes:
* A new ping example.
* Documentation improvements.
* More documentation improvements.
* Add PingPolicy and ensure no event is dropped.
* Remove inbound_timeout/outbound_timeout.
As per review comment, the inbound timeout is now configured
as part of the `listen_protocol` and the outbound timeout as
part of the `OutboundSubstreamRequest`.
* Simplify and generalise.
Generalise `ListenProtocol` to `SubstreamProtocol`, reusing it in
the context of `ProtocolsHandlerEvent::OutboundSubstreamRequest`.
* Doc comments for SubstreamProtocol.
* Adapt to changes in master.
* Relax upper bound for ping integration test rtt.
For "slow" CI build machines?
Replace the listener and address pair returned from `Transport::listen_on` with just a listener that produces `ListenerEvent` values which include upgrades as well as address changes.
* Documentation updates:
* libp2p: Update the top-level module documentation, already including
intra-rustdoc links, removing outdated documentation, updating examples and
polishing the text.
* libp2p-core: Update the transport documentation to clarify that a `Transport`
is really an abstraction only for connection-oriented transports.
* More links
* Fix typo.
* Address review comments.
* More doc tweaks.
* Mention the necessity of creating an identity keypair.
* Remove another mention of the removed Topology trait.
* Consolidate keypairs in core.
Introduce the concept of a node's identity keypair in libp2p-core,
instead of only the public key:
* New module: libp2p_core::identity with submodules for the currently
supported key types. An identity::Keypair and identity::PublicKey
support the creation and verification of signatures. The public key
supports encoding/decoding according to the libp2p specs.
* The secio protocol is simplified as a result of moving code to libp2p-core.
* The noise protocol is slightly simplified by consolidating ed25519
keypairs in libp2p-core and using x25519-dalek for DH. Furthermore,
Ed25519 to X25519 keypair conversion is now complete and tested.
Generalise over the DH keys in the noise protocol.
Generalise over the DH keys and thus DH parameter in handshake patterns
of the Noise protocol, such that it is easy to support other DH schemes
in the future, e.g. X448.
* Address new review comments.
* Add a BandwidthLogging transport wrapper
* Update src/bandwidth.rs
Co-Authored-By: tomaka <pierre.krieger1708@gmail.com>
* Limit by bytes.len
* Write test for bandwidth report
* Use the vector length instead of rolling_seconds
* Add an Error associated type to transports
* Improve raw swarm a bit
* Rename map_other to map
* Use source() instead of cause()
* RawSwarmIncErr -> IncomingError
* Add a floodsub example with the new Swarm
* WIP fixes for Floodsub chat-example code
* cleanup
* Address grumbles
* Update docs
* Update to newest master
* Add ProtocolsHandlerSelect
* Add a custom derive for NetworkBehaviour
* Remove 2018 edition
* More work
* Update the tests and work
* Allow ignored fields
* More fixes
* Give access to everything in the poll method
* Use the sha2 crate in the handshake
* Return a Digest in algo_support instead of a ring ref
* Switch to ed25519-dalek for keys
* Make ring more or less optional
* Switch to ed25519_dalek for the verification
* Extract the key exchange to its own module
* Remove the ring RNG from the handshake
* Some warning fixes and forgot file
* Move key exchange to own module
* Remove usage of ring::digest
* Remove ring from handshake entirely
* Implement ECDH for WebCrypto
* Remove the libp2p-secio feature
* Fix ring being included
* Address some concerns
* Provde some panics in WebCrypto
* Prove the Hmac panic
* Prove more panics
Refactor multiaddr crate.
- Remove `AddrComponent`. Instead `Protocol` directly contains its
associated data.
- Various smaller changes around conversions to Multiaddr from other
types, e.g. socket addresses.
- Expand tests to include property tests which test encoding/decoding
identity.
* Introduce NULL cipher and allow more configuration.
* Back to using the hash-code for handshake.
Using `Endpoint` would be incompatible with the existing protocol.
* Add comments.
