* Add "infinite" scores for external addresses.
Extend address scores with an infinite cardinal, permitting
addresses to be retained "forever" or until explicitly removed.
Expose (external) address scores on the API.
* Update swarm/src/registry.rs
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Fix compilation.
* Update CHANGELOG
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* feat: upgrade to multihash 0.13
`multihash` changes a lot internally, it is using stack allocation instead
of heap allocation. This leads to a few limitations in regards on how
`Multihash` can be used.
Therefore `PeerId` is now using a `Bytes` internally so that only minimal
changes are needed.
* Update versions and changelogs.
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
Co-authored-by: Roman S. Borschel <roman@parity.io>
* Streamline mplex and yamux configurations.
* For all configuration options that exist for both multiplexers
and have the same semantics, use the same names for the
configuration.
* Rename `Config` to `YamuxConfig` for consistentcy with
the majority of other protocols, e.g. `MplexConfig`, `PingConfig`,
`KademliaConfig`, etc.
* Completely hide `yamux` APIs within `libp2p-yamux`. This allows
to fully control the libp2p API and streamline it with other
muxer APIs, consciously choosing e.g. which configuration options
to make configurable in libp2p and which to fix to certain values.
It does also not necessarily prescribe new incompatible version bumps of
yamux for `libp2p-yamux`, as no `yamux` types are exposed. The cost
is some more duplication of configuration options in the API, as well
as the need to update `libp2p-yamux` if `yamux` introduces new
configuration options that `libp2p-yamux` wants to expose as well.
* Update CHANGELOGs.
In all cases, we pass the PeerId directly as the connection info.
The flexbility of doing something different here was originally
envisioned but turned out to be never needed.
For reference see: https://github.com/libp2p/rust-libp2p/issues/1798#issuecomment-714526056
Co-authored-by: Max Inden <mail@max-inden.de>
* [multistream-select] Fix panic with V1Lazy and add integration tests.
Fixes a panic when using the `V1Lazy` negotiation protocol,
a regression introduced in https://github.com/libp2p/rust-libp2p/pull/1484.
Thereby adds integration tests for a transport upgrade with both
`V1` and `V1Lazy` to the `multistream-select` crate to prevent
future regressions.
* Cleanup.
* Update changelog.
* Emit events for active connection close and fix `disconnect()`.
The `Network` does currently not emit events for actively
closed connections, e.g. via `EstablishedConnection::close`
or `ConnectedPeer::disconnect()`. As a result, when actively
closing connections, there will be `ConnectionEstablished`
events emitted without eventually a matching `ConnectionClosed`
event. This seems undesirable and has the consequence that
the `Swarm::ban_peer_id` feature in `libp2p-swarm` does not
result in appropriate calls to `NetworkBehaviour::inject_connection_closed`
and `NetworkBehaviour::inject_disconnected`. Furthermore,
the `disconnect()` functionality in `libp2p-core` is currently
broken as it leaves the `Pool` in an inconsistent state.
This commit does the following:
1. When connection background tasks are dropped
(i.e. removed from the `Manager`), they
always terminate immediately, without attempting
an orderly close of the connection.
2. An orderly close is sent to the background task
of a connection as a regular command. The
background task emits a `Closed` event
before terminating.
3. `Pool::disconnect()` removes all connection
tasks for the affected peer from the `Manager`,
i.e. without an orderly close, thereby also
fixing the discovered state inconsistency
due to not removing the corresponding entries
in the `Pool` itself after removing them from
the `Manager`.
4. A new test is added to `libp2p-swarm` that
exercises the ban/unban functionality and
places assertions on the number and order
of calls to the `NetworkBehaviour`. In that
context some new testing utilities have
been added to `libp2p-swarm`.
This addresses https://github.com/libp2p/rust-libp2p/issues/1584.
* Update swarm/src/lib.rs
Co-authored-by: Toralf Wittner <tw@dtex.org>
* Incorporate some review feedback.
* Adapt to changes in master.
* More verbose panic messages.
* Simplify
There is no need for a `StartClose` future.
* Fix doc links.
* Further small cleanup.
* Update CHANGELOGs and versions.
Co-authored-by: Toralf Wittner <tw@dtex.org>
This adds optional message signing and verification to the gossipsub protocol as
per the libp2p specifications.
In addition this commit:
- Removes the LruCache received cache and simply uses the memcache in it's
place.
- Send subscriptions to all peers
- Prevent invalid messages from being gossiped
- Send grafts when subscriptions are added to the mesh
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Rüdiger Klaehn <rklaehn@protonmail.com>
Co-authored-by: Rüdiger Klaehn <rklaehn@gmail.com>
* Add debug instances for MessageCache and GossipSub behaviour
* Manual impl of Debug for GossipsubMessage
* Add pretty printing of protocol_id in debug
* Use hex_fmt instead of hex
* Inline StringOrBytes helper struct
Since it is used only once here
* Limit data of gossipsub msg to 20 bytes
Otherwise they might become very large and useless for debugging
- Update `libp2p-kad` CHANGELOG and increment version to 0.20.1.
- Update `libp2p` version to 0.20.1.
- Fix some linter warning in `libp2p-gossipsub` and increment
version to 0.19.3 and update CHANGELOG.
If a user sends a message that is over the maximum transmission size gossipsub
will disconnect from the peer being sent the message.
This PR updates the logic to simply emit an error, not send the over-sized
message but maintain the long-lived streams for future messages.
Co-authored-by: Age Manning <Age@AgeManning.com>
* [libp2p-swarm] Make the multiple connections per peer first-class.
This commit makes the notion of multiple connections per peer
first-class in the API of libp2p-swarm, introducing the new
callbacks `inject_connection_established` and
`inject_connection_closed`. The `endpoint` parameter from
`inject_connected` and `inject_disconnected` is removed,
since the first connection to open may not be the last
connection to close, i.e. it cannot be guaranteed,
as was previously the case, that the endpoints passed
to these callbacks match up.
* Have identify track all addresses.
So that identify requests can be answered with the correct
observed address of the connection on which the request
arrives.
* Cleanup
* Cleanup
* Improve the `Peer` state API.
* Remove connection ID from `SwarmEvent::Dialing`.
* Mark `DialPeerCondition` non-exhaustive.
* Re-encapsulate `NetworkConfig`.
To retain the possibility of not re-exposing all
network configuration choices, thereby providing
a more convenient API on the \`SwarmBuilder\`.
* Rework Swarm::dial API.
* Update CHANGELOG.
* Doc formatting tweaks.
* Allow multiple connections per peer in libp2p-core.
Instead of trying to enforce a single connection per peer,
which involves quite a bit of additional complexity e.g.
to prioritise simultaneously opened connections and can
have other undesirable consequences [1], we now
make multiple connections per peer a feature.
The gist of these changes is as follows:
The concept of a "node" with an implicit 1-1 correspondence
to a connection has been replaced with the "first-class"
concept of a "connection". The code from `src/nodes` has moved
(with varying degrees of modification) to `src/connection`.
A `HandledNode` has become a `Connection`, a `NodeHandler` a
`ConnectionHandler`, the `CollectionStream` was the basis for
the new `connection::Pool`, and so forth.
Conceptually, a `Network` contains a `connection::Pool` which
in turn internally employs the `connection::Manager` for
handling the background `connection::manager::Task`s, one
per connection, as before. These are all considered implementation
details. On the public API, `Peer`s are managed as before through
the `Network`, except now the API has changed with the shift of focus
to (potentially multiple) connections per peer. The `NetworkEvent`s have
accordingly also undergone changes.
The Swarm APIs remain largely unchanged, except for the fact that
`inject_replaced` is no longer called. It may now practically happen
that multiple `ProtocolsHandler`s are associated with a single
`NetworkBehaviour`, one per connection. If implementations of
`NetworkBehaviour` rely somehow on communicating with exactly
one `ProtocolsHandler`, this may cause issues, but it is unlikely.
[1]: https://github.com/paritytech/substrate/issues/4272
* Fix intra-rustdoc links.
* Update core/src/connection/pool.rs
Co-Authored-By: Max Inden <mail@max-inden.de>
* Address some review feedback and fix doc links.
* Allow responses to be sent on the same connection.
* Remove unnecessary remainders of inject_replaced.
* Update swarm/src/behaviour.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update swarm/src/lib.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update core/src/connection/manager.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update core/src/connection/manager.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update core/src/connection/pool.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Incorporate more review feedback.
* Move module declaration below imports.
* Update core/src/connection/manager.rs
Co-Authored-By: Toralf Wittner <tw@dtex.org>
* Update core/src/connection/manager.rs
Co-Authored-By: Toralf Wittner <tw@dtex.org>
* Simplify as per review.
* Fix rustoc link.
* Add try_notify_handler and simplify.
* Relocate DialingConnection and DialingAttempt.
For better visibility constraints.
* Small cleanup.
* Small cleanup. More robust EstablishedConnectionIter.
* Clarify semantics of `DialingPeer::connect`.
* Don't call inject_disconnected on InvalidPeerId.
To preserve the previous behavior and ensure calls to
`inject_disconnected` are always paired with calls to
`inject_connected`.
* Provide public ConnectionId constructor.
Mainly needed for testing purposes, e.g. in substrate.
* Move the established connection limit check to the right place.
* Clean up connection error handling.
Separate connection errors into those occuring during
connection setup or upon rejecting a newly established
connection (the `PendingConnectionError`) and those
errors occurring on previously established connections,
i.e. for which a `ConnectionEstablished` event has
been emitted by the connection pool earlier.
* Revert change in log level and clarify an invariant.
* Remove inject_replaced entirely.
* Allow notifying all connection handlers.
Thereby simplify by introducing a new enum `NotifyHandler`,
used with a single constructor `NetworkBehaviourAction::NotifyHandler`.
* Finishing touches.
Small API simplifications and code deduplication.
Some more useful debug logging.
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
Co-authored-by: Toralf Wittner <tw@dtex.org>
* Fix broken links in rustdoc
This fixes all of the rustdoc warnings on nightly.
* Check documentation intra-link
* Fix config
* Fix bad indent
* Make nightly explicit
* More links fixes
* Fix link broken after master merge
Co-authored-by: Demi Obenour <48690212+DemiMarie-parity@users.noreply.github.com>
* Simplify trait bounds requirements
* More work
* Moar
* Finish
* Fix final tests
* More simplification
* Use separate traits for Inbound/Outbound
* Update gossipsub and remove warnings
* Add documentation to swarm
* Remove BoxSubstream
* Fix tests not compiling
* Fix stack overflow
* Address concerns
* For some reason my IDE ignored libp2p-kad
