This PR changes the logging of the Kademlia connection handler related to the remote Kademlia mode changes:
- Downgrade log level for the remote kademlia protocol report from `info` to `debug`.
- Introduce connection_id for the handler to improve logging.
Pull-Request: #4278.
The display of `ListenError` could be more helpful. The inner `cause` already implements `Error` which in turn requires `Display`. This is then just a matter of using said impl requirement to get an useful display
Pull-Request: #4232.
Using workspace inheritance breaks `cargo release` because it cannot resolve that the dev-dependencies should only use a `path` and not a version.
Pull-Request: #4097.
Co-Authored-By: Thomas Eizinger <thomas@eizinger.io>
We have two "interface" crates in our workspace: `libp2p-core` and `libp2p-swarm`. Most crates depend on both of these. To compile the tests for this crate, we often need a concrete implementation to some of these interfaces. When specifying a workspace-inherited dependency, we don't get to choose to omit the `version` field next to the path. If a dependency is `path`-only however, it will be tripped by `cargo` during the release process which is why all of this worked before our move to workspace inheritance.
With this patch, we change the minimum amount of dependencies necessary back to `path` dependencies to allowing releasing of our crates.
Related: #4053.
Pull-Request: #4091.
Co-Authored-By: Thomas Eizinger <thomas@eizinger.io>
Prior to this change it was only possible to downcast a `ConnectionDenied` error when you had ownership of it which isn't the case inside `NetworkBehaviour`s. This change allows downcasting by reference.
See https://github.com/libp2p/rust-libp2p/discussions/4018.
Pull-Request: #4020.
This extends `ToSwarm` to add `ToSwarm::ListenOn` and `ToSwarm::RemoveListener`, which allows creating and removing listeners from a `NetworkBehaviour`.
Resolves https://github.com/libp2p/rust-libp2p/issues/3291.
Pull-Request: #3292.
In the unlikely event that we generated a random number twice, the 2nd address would not get added. Ensure we loop until we have 20 addresses.
Pull-Request: #4030.
Currently, the kademlia behaviour can only learn that the remote node supports kademlia on a particular connection if we successfully negotiate a stream to them.
Using the newly introduced abstractions from #3651, we don't have to attempt to establish a stream to the remote to learn whether they support kademlia on a connection but we can directly learn it from the `ConnectionEvent::RemoteProtocolsChange` event. This happens directly once a connection is established which should overall benefit the DHT.
Clients do not advertise the kademlia protocol and thus we will immediately learn that a given connection is not suitable for kadmelia requests. We may receive inbound messages from it but this does not affect the routing table.
Resolves: #2032.
Pull-Request: #3877.
This modification removes deprecated dependency `wasm_timer` and enables wasm compatibility on the gossibsup protocol by simply substituting the `wasm_timer::Instant` with `instant::Instant`(which supports `fn checked_add`) and `wasm_timer::Interval` with `futures_ticker::Ticker`.
Pull-Request: #3973.
Previously, the `libp2p-ping` module came with a policy to close a connection after X failed pings. This is only one of many possible policies on how users would want to do connection management.
We remove this policy without a replacement. If users wish to restore this functionality, they can easily implement such policy themselves: The default value of `max_failures` was 1. To restore the previous functionality users can simply close the connection upon the first received ping error.
In this same patch, we also simplify the API of `ping::Event` by removing the layer of `ping::Success` and instead reporting the RTT to the peer directly.
Related: #3591.
Pull-Request: #3947.
Previously, a `NetworkBehaviour` could report an `AddressScore` for an external address. This score was a `u32` and addresses would be ranked amongst those.
In reality, an address is either confirmed to be publicly reachable (via a protocol such as AutoNAT) or merely represents a candidate that might be an external address. In a way, addresses are guilty (private) until proven innocent (publicly reachable).
When a `NetworkBehaviour` reports an address candidate, we perform address translation on it to potentially correct for ephemeral ports of TCP. These candidates are then injected back into the `NetworkBehaviour`. Protocols such as AutoNAT can use these addresses as a source for probing their NAT status. Once confirmed, they can emit a `ToSwarm::ExternalAddrConfirmed` event which again will be passed to all `NetworkBehaviour`s.
This simplified approach will allow us implement Kademlia's client-mode (https://github.com/libp2p/rust-libp2p/issues/2032) without additional configuration options: As soon as an address is reported as publicly reachable, we can activate server-mode for that connection.
Related: https://github.com/libp2p/rust-libp2p/pull/3877.
Related: https://github.com/libp2p/rust-libp2p/issues/3953.
Related: https://github.com/libp2p/rust-libp2p/issues/2032.
Related: https://github.com/libp2p/go-libp2p/issues/2229.
Co-authored-by: Max Inden <mail@max-inden.de>
Pull-Request: #3954.
Previously, we would not call the handler upon injecting `ConnectionEvent::LocalProtocolsChange`. This would prevent protocols from being able to react to this change and e.g. issue events or open streams.
Pull-Request: #3979.
This PR refactors the error reporting away from panicking to returning `syn::Result` and adds two unit tests for the parsing of attributes that users interact with.
Pull-Request: #3922.
Previously, the associated types on `NetworkBehaviour` and `ConnectionHandler` carried generic names like `InEvent` and `OutEvent`. These names are _correct_ in that `OutEvent`s are passed out and `InEvent`s are passed in but they don't help users understand how these types are used.
In theory, a `ConnectionHandler` could be used separately from `NetworkBehaviour`s but that is highly unlikely. Thus, we rename these associated types to indicate, where the message is going to be sent to:
- `NetworkBehaviour::OutEvent` is renamed to `ToSwarm`: It describes the message(s) a `NetworkBehaviour` can emit to the `Swarm`. The user is going to receive those in `SwarmEvent::Behaviour`.
- `ConnectionHandler::InEvent` is renamed to `FromBehaviour`: It describes the message(s) a `ConnectionHandler` can receive from its behaviour via `ConnectionHandler::on_swarm_event`. The `NetworkBehaviour` can send it via the `ToSwarm::NotifyHandler` command.
- `ConnectionHandler::OutEvent` is renamed to `ToBehaviour`: It describes the message(s) a `ConnectionHandler` can send back to the behaviour via the now also renamed `ConnectionHandlerEvent::NotifyBehaviour` (previously `ConnectionHandlerEvent::Custom`)
Resolves: #2854.
Pull-Request: #3848.
`Transport::listen_on` is an asynchronous operation. It returns immediately but the actual process of establishing a listening socket happens as part of `Transport::poll` which will return one or more `TransportEvent`s related to a particular `listen_on` call.
Currently, `listen_on` returns a `ListenerId` which allows the user of the `Transport` interface to correlate the events with a particular `listen_on` call. This "user" is the `Swarm` runtime. Currently, a user of libp2p establishes a new listening socket by talking to the `Swarm::listen_on` interface and it is not possible to do the same thing via the `NetworkBehaviour` trait.
Within the `NetworkBehaviour` trait, we emit _commands_ to the `Swarm` like `ToSwarm::Dial`. These commands don't have a "return value" like a synchronous function does and thus, if we were to add a `ToSwarm::ListenOn` command, it could not receive the `ListenerId` from the `Transport`.
To fix this and to be consistent with our [coding guidelines](https://github.com/libp2p/rust-libp2p/blob/master/docs/coding-guidelines.md#allow-correlating-asynchronous-responses-to-their-requests) we change the interface of `Transport::listen_on` to require the user to pass in a `ListenerId`. This will allow us to construct a command in a `NetworkBehaviour` that remembers this ID which enables precise tracking of which events containing a `ListenerId` correlate which a particular `listen_on` command.
This is especially important in the context of listening on wildcard addresses like `0.0.0.0` because we end up binding to multiple network interfaces and thus emit multiple events for a single `listen_on` call.
Pull-Request: #3567.
This patch tackles two things at once that are fairly intertwined:
1. There is no such thing as a "substream" in libp2p, the spec and other implementations only talk about "streams". We fix this by deprecating `NegotiatedSubstream`.
2. Previously, `NegotiatedSubstream` was a type alias that pointed to a type from `multistream-select`, effectively leaking the version of `multistream-select` to all dependencies of `libp2p-swarm`. We fix this by introducing a `Stream` newtype.
Resolves: #3759.
Related: #3748.
Pull-Request: #3912.
With this patch, implementations of `ConnectionHandler` (which are typically composed in a tree) can exchange information about the supported protocols of a remote with each other via `ConnectionHandlerEvent::ReportRemoteProtocols`. The provided `ProtocolSupport` enum can describe either additions or removals of the remote peer's protocols.
This information is aggregated in the connection and passed down to the `ConnectionHandler` via `ConnectionEvent::RemoteProtocolsChange`.
Similarly, if the listen protocols of a connection change, all `ConnectionHandler`s on the connection will be notified via `ConnectionEvent::LocalProtocolsChange`. This will allow us to eventually remove `PollParameters` from `NetworkBehaviour`.
This pattern allows protocols on a connection to communicate with each other. For example, protocols like identify can share the list of (supposedly) supported protocols by the remote with all other handlers. A protocol like kademlia can accurately add and remove a remote from its routing table as a result.
Resolves: #2680.
Related: #3124.
Pull-Request: #3651.
Users are encouraged to use `libp2p::connection_limit::Behaviour` which is a one-to-one replacement for this functionality but built as a `NetworkBehaviour`.
Related: #3647.
Pull-Request: #3885.
The currently provided `ConnectionHandlerUpgrErr` is very hard to use. Not only does it have a long name, it also features 3 levels of nesting which results in a lot of boilerplate. Last but not least, it exposes `multistream-select` as a dependency to all protocols.
We fix all of the above by renaming the type to `StreamUpgradeError` and flattening out its interface. Unrecoverable errors during protocol selection are hidden within the `Io` variant.
Related: #3759.
Pull-Request: #3882.
This removes the deprecated `IntoConnectionHandler` trait and all its implementations. Consequently, `NetworkBehaviour::new_handler` and `NetworkBehaviour::addresses_of_peer` are now gone and the two `handle_` functions are now required to implement.
Related: #3647.
Pull-Request: #3884.
