Unless restricted by orphan rules, implementing `From` is superior
because it implies `Into` but leaves the choice to the user, which
one to use. Especially for errors, `From` is convenient because that
is what `?` builds on.
Co-authored-by: Max Inden <mail@max-inden.de>
This will allow capturing variables in these closures so that we can
make these functions aware of the forkId (necessary for altair).
Co-authored-by: Max Inden <mail@max-inden.de>
Not all implementations of `NetworkBehaviour` need all callbacks.
We've have been adding new callbacks with default implementations
for a while now. There is no reason the initial ones cannot also
be defaulted, thus making it easier create new implementations.
Co-authored-by: Max Inden <mail@max-inden.de>
- Change `PublicKey::into_protobuf_encoding` to
`PublicKey::to_protobuf_encoding`.
- Change `PublicKey::into_peer_id` to `PublicKey::to_peer_id`.
- Change `PeerId::from_public_key(PublicKey)` to
`PeerId::from_public_key(&PublicKey)`.
- Add `From<&PublicKey> for PeerId`.
Co-authored-by: Max Inden <mail@max-inden.de>
Add `ExpandedSwarm::disconnect_peer_id` and
`NetworkBehaviourAction::CloseConnection` to close connections to a specific
peer via an `ExpandedSwarm` or `NetworkBehaviour`.
Co-authored-by: Max Inden <mail@max-inden.de>
Change `Stream` implementation of `ExpandedSwarm` to return all
`SwarmEvents` instead of only the `NetworkBehaviour`'s events.
Remove `ExpandedSwarm::next_event`. Users can use `<ExpandedSwarm as
StreamExt>::next` instead.
Remove `ExpandedSwarm::next`. Users can use `<ExpandedSwarm as
StreamExt>::filter_map` instead.
Remove `Deref` and `DerefMut` implementations previously dereferencing
to the `NetworkBehaviour` on `Swarm`. Instead one can access the
`NetworkBehaviour` via `Swarm::behaviour` and `Swarm::behaviour_mut`.
Methods on `Swarm` can now be accessed directly, e.g. via
`my_swarm.local_peer_id()`.
Reasoning: Accessing the `NetworkBehaviour` of a `Swarm` through `Deref`
and `DerefMut` instead of a method call is an unnecessary complication,
especially for newcomers. In addition, `Swarm` is not a smart-pointer
and should thus not make use of `Deref` and `DerefMut`, see documentation
from the standard library below.
> Deref should only be implemented for smart pointers to avoid
confusion.
https://doc.rust-lang.org/std/ops/trait.Deref.html
* Implement `/dnsaddr` support on `libp2p-dns`.
To that end, since resolving `/dnsaddr` addresses needs
"fully qualified" multiaddresses when dialing, i.e. those
that end with the `/p2p/...` protocol, we make sure that
dialing always uses such fully qualified addresses by
appending the `/p2p` protocol as necessary. As a side-effect,
this adds support for dialing peers via "fully qualified"
addresses, as an alternative to using a `PeerId` together
with a `Multiaddr` with or without the `/p2p` protocol.
* Adapt libp2p-relay.
* Update versions, changelogs and small cleanups.
* Remove substream-specific protocol negotiation version.
Remove the option for a substream-specific multistream select protocol override.
The override at this granularity is no longer deemed useful, in particular because
it can usually not be configured for existing protocols like `libp2p-kad` and others.
There is a `Swarm`-scoped configuration for this version available since
[1858](https://github.com/libp2p/rust-libp2p/pull/1858).
* Update protocol crate versions and changelogs.
* Clean up documentation.
* Make clippy "happy".
Address all clippy complaints that are not purely stylistic (or even
have corner cases with false positives). Ignore all "style" and "pedantic" lints.
* Fix tests.
* Undo unnecessary API change.
Move transport upgrade protocols from `protocols/`
to `transports/`, such that only "application protocols"
that depend on `libp2p-swarm` remain in `protocols/`,
whereas there is no such dependency in `transports/`
outside of integration tests.
Tweak README and top-level CHANGELOG.
Currently, Gossipsub messages may not be published on a topic if there are no
subscribed peers on that topic, however they are being added to a duplicate
cache. If the messages are content-addressed, this prevents the user from
attempting to republish the message in the future.
This commit modifies the logic such that messages are only added to the caches
(duplicate, memcache and published_messages) if the message could be published
to at least one peer.
Previously, a failed publish would be added the memcache. This meant that the
router would gossip about a failed publish, such that if a peer joined the topic
after the failed publish (but within the gossip history time window) the message
could still be propagated to the newly connected peers. With this PR, a failed
publish now definitively indicates the message will not be published on the
network and the user is required to re-submit at a later time, once sufficient
peers exist on the topic.
`futures-codec` has not been updated in the recent months. It still
depends on `bytes` `v0.5` preventing all downstream dependencies to
upgrade to `bytes` `v1.0`.
This commit replaces `futures_codec` in favor of `asynchronous-codec`
The latter is a fully upgraded fork of the former.
In addition this commit upgrades:
- bytes to v1
- unsigned-varint to v0.6.0
- prost to v0.7
This commit upgrades the current gossipsub implementation to support the [v1.1
spec](https://github.com/libp2p/specs/blob/master/pubsub/gossipsub/gossipsub-v1.1.md).
It adds a number of features, bug fixes and performance improvements.
Besides support for all new 1.1 features, other improvements that are of particular note:
- Improved duplicate LRU-time cache (this was previously a severe bottleneck for
large message throughput topics)
- Extended message validation configuration options
- Arbitrary topics (users can now implement their own hashing schemes)
- Improved message validation handling - Invalid messages are no longer dropped
but sent to the behaviour for application-level processing (including scoring)
- Support for floodsub, gossipsub v1 and gossipsub v2
- Protobuf encoding has been shifted into the behaviour. This has permitted two
improvements:
1. Message size verification during publishing (report to the user if the
message is too large before attempting to send).
2. Message fragmentation. If an RPC is too large it is fragmented into its
sub components and sent in smaller chunks.
Additional Notes
The peer eXchange protocol defined in the v1.1 spec is inactive in its current
form. The current implementation permits sending `PeerId` in `PRUNE` messages,
however a `PeerId` is not sufficient to form a new connection to a peer. A
`Signed Address Record` is required to safely transmit peer identity
information. Once these are confirmed (https://github.com/libp2p/specs/pull/217)
a future PR will implement these and make PX usable.
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Rüdiger Klaehn <rklaehn@protonmail.com>
Co-authored-by: blacktemplar <blacktemplar@a1.net>
Co-authored-by: Rüdiger Klaehn <rklaehn@gmail.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Roman S. Borschel <roman@parity.io>
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
Co-authored-by: David Craven <david@craven.ch>
* Add "infinite" scores for external addresses.
Extend address scores with an infinite cardinal, permitting
addresses to be retained "forever" or until explicitly removed.
Expose (external) address scores on the API.
* Update swarm/src/registry.rs
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Fix compilation.
* Update CHANGELOG
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* feat: upgrade to multihash 0.13
`multihash` changes a lot internally, it is using stack allocation instead
of heap allocation. This leads to a few limitations in regards on how
`Multihash` can be used.
Therefore `PeerId` is now using a `Bytes` internally so that only minimal
changes are needed.
* Update versions and changelogs.
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
Co-authored-by: Roman S. Borschel <roman@parity.io>
* Streamline mplex and yamux configurations.
* For all configuration options that exist for both multiplexers
and have the same semantics, use the same names for the
configuration.
* Rename `Config` to `YamuxConfig` for consistentcy with
the majority of other protocols, e.g. `MplexConfig`, `PingConfig`,
`KademliaConfig`, etc.
* Completely hide `yamux` APIs within `libp2p-yamux`. This allows
to fully control the libp2p API and streamline it with other
muxer APIs, consciously choosing e.g. which configuration options
to make configurable in libp2p and which to fix to certain values.
It does also not necessarily prescribe new incompatible version bumps of
yamux for `libp2p-yamux`, as no `yamux` types are exposed. The cost
is some more duplication of configuration options in the API, as well
as the need to update `libp2p-yamux` if `yamux` introduces new
configuration options that `libp2p-yamux` wants to expose as well.
* Update CHANGELOGs.
* [multistream-select] Fix panic with V1Lazy and add integration tests.
Fixes a panic when using the `V1Lazy` negotiation protocol,
a regression introduced in https://github.com/libp2p/rust-libp2p/pull/1484.
Thereby adds integration tests for a transport upgrade with both
`V1` and `V1Lazy` to the `multistream-select` crate to prevent
future regressions.
* Cleanup.
* Update changelog.
