When a peer disconnects, reservations associated with that peer are removed from
the set of reservations of the peer. In case the set of reservations for the
peer is now empty, remove the entire peer.
Same when a reservation times out.
Allows `NetworkBehaviour` implementations to dial a peer, but instruct
the dialed connection to be upgraded as if it were the listening
endpoint.
This is needed when establishing direct connections through NATs and/or
Firewalls (hole punching). When hole punching via TCP (QUIC is different
but similar) both ends dial the other at the same time resulting in a
simultaneously opened TCP connection. To disambiguate who is the dialer
and who the listener there are two options:
1. Use the Simultaneous Open Extension of Multistream Select. See
[sim-open] specification and [sim-open-rust] Rust implementation.
2. Disambiguate the role (dialer or listener) based on the role within
the DCUtR [dcutr] protocol. More specifically the node initiating the
DCUtR process will act as a listener and the other as a dialer.
This commit enables (2), i.e. enables the DCUtR protocol to specify the
role used once the connection is established.
While on the positive side (2) requires one round trip less than (1), on
the negative side (2) only works for coordinated simultaneous dials.
I.e. when a simultaneous dial happens by chance, and not coordinated via
DCUtR, the connection attempt fails when only (2) is in place.
[sim-open]: https://github.com/libp2p/specs/blob/master/connections/simopen.md
[sim-open-rust]: https://github.com/libp2p/rust-libp2p/pull/2066
[dcutr]: https://github.com/libp2p/specs/blob/master/relay/DCUtR.md
This commit adds an implementation for the circuit relay v2 protocol to be used
as a relay server, i.e. it supports incoming HOP requests and outgoing STOP
requests and used as a relay clients, i.e. outgoing HOP requests and incoming
STOP requests.
The existing circuit relay v1 protocol implementation is moved to
protocols/relay/src/v1.
Co-authored-by: ronzigelman <ronzigelman@gmail.com>
Co-authored-by: Marco Munizaga <git@marcopolo.io>
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Co-authored-by: Elena Frank <57632201+elenaf9@users.noreply.github.com>
Enable advanced dialing requests both on `Swarm` and via
`NetworkBehaviourAction`. Users can now trigger a dial with a specific
set of addresses, optionally extended via
`NetworkBehaviour::addresses_of_peer`. In addition the whole process is
now modelled in a type safe way via the builder pattern.
Example of a `NetworkBehaviour` requesting a dial to a specific peer
with a set of addresses additionally extended through
`NetworkBehaviour::addresses_of_peer`:
```rust
NetworkBehaviourAction::Dial {
opts: DialOpts::peer_id(peer_id)
.condition(PeerCondition::Always)
.addresses(addresses)
.extend_addresses_through_behaviour()
.build(),
handler,
}
```
Example of a user requesting a dial to an unknown peer with a single
address via `Swarm`:
```rust
swarm1.dial(
DialOpts::unknown_peer_id()
.address(addr2.clone())
.build()
)
```
Changes needed to get libp2p to run via `wasm32-unknown-unknown` in the browser
(both main thread and inside web workers).
Replaces wasm-timer with futures-timer and instant.
Co-authored-by: Oliver Wangler <oliver@wngr.de>
Concurrently dial address candidates within a single dial attempt.
Main motivation for this feature is to increase success rate on hole punching
(see https://github.com/libp2p/rust-libp2p/issues/1896#issuecomment-885894496
for details). Though, as a nice side effect, as one would expect, it does
improve connection establishment time.
Cleanups and fixes done along the way:
- Merge `pool.rs` and `manager.rs`.
- Instead of manually implementing state machines in `task.rs` use
`async/await`.
- Fix bug where `NetworkBehaviour::inject_connection_closed` is called without a
previous `NetworkBehaviour::inject_connection_established` (see
https://github.com/libp2p/rust-libp2p/issues/2242).
- Return handler to behaviour on incoming connection limit error. Missed in
https://github.com/libp2p/rust-libp2p/issues/2242.
Require `NetworkBehaviourAction::{DialPeer,DialAddress}` to contain a
`ProtocolsHandler`. This allows a behaviour to attach custom state to its
handler. The behaviour would no longer need to track this state separately
during connection establishment, thus reducing state required in a behaviour.
E.g. in the case of `libp2p-kad` the behaviour can include a `GetRecord` request
in its handler, or e.g. in the case of `libp2p-request-response` the behaviour
can include the first request in the handler.
Return `ProtocolsHandler` on connection error and close. This allows a behaviour
to extract its custom state previously included in the handler on connection
failure and connection closing. E.g. in the case of `libp2p-kad` the behaviour
could extract the attached `GetRecord` from the handler of the failed connection
and then start another connection attempt with a new handler with the same
`GetRecord` or bubble up an error to the user.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
- Change `PublicKey::into_protobuf_encoding` to
`PublicKey::to_protobuf_encoding`.
- Change `PublicKey::into_peer_id` to `PublicKey::to_peer_id`.
- Change `PeerId::from_public_key(PublicKey)` to
`PeerId::from_public_key(&PublicKey)`.
- Add `From<&PublicKey> for PeerId`.
Co-authored-by: Max Inden <mail@max-inden.de>
Remove `Deref` and `DerefMut` implementations previously dereferencing
to the `NetworkBehaviour` on `Swarm`. Instead one can access the
`NetworkBehaviour` via `Swarm::behaviour` and `Swarm::behaviour_mut`.
Methods on `Swarm` can now be accessed directly, e.g. via
`my_swarm.local_peer_id()`.
Reasoning: Accessing the `NetworkBehaviour` of a `Swarm` through `Deref`
and `DerefMut` instead of a method call is an unnecessary complication,
especially for newcomers. In addition, `Swarm` is not a smart-pointer
and should thus not make use of `Deref` and `DerefMut`, see documentation
from the standard library below.
> Deref should only be implemented for smart pointers to avoid
confusion.
https://doc.rust-lang.org/std/ops/trait.Deref.html
* Implement `/dnsaddr` support on `libp2p-dns`.
To that end, since resolving `/dnsaddr` addresses needs
"fully qualified" multiaddresses when dialing, i.e. those
that end with the `/p2p/...` protocol, we make sure that
dialing always uses such fully qualified addresses by
appending the `/p2p` protocol as necessary. As a side-effect,
this adds support for dialing peers via "fully qualified"
addresses, as an alternative to using a `PeerId` together
with a `Multiaddr` with or without the `/p2p` protocol.
* Adapt libp2p-relay.
* Update versions, changelogs and small cleanups.
This commit implements the [libp2p circuit
relay](https://github.com/libp2p/specs/tree/master/relay) specification. It is
based on previous work from https://github.com/libp2p/rust-libp2p/pull/1134.
Instead of altering the `Transport` trait, the approach taken in this commit
is to wrap an existing implementation of `Transport` allowing one to:
- Intercept `dial` requests with a relayed address.
- Inject incoming relayed connections with the local node being the destination.
- Intercept `listen_on` requests pointing to a relay, ensuring to keep a
constant connection to the relay, waiting for incoming requests with the local
node being the destination.
More concretely one would wrap an existing `Transport` implementation as seen
below, allowing the `Relay` behaviour and the `RelayTransport` to communicate
via channels.
### Example
```rust
let (relay_transport, relay_behaviour) = new_transport_and_behaviour(
RelayConfig::default(),
MemoryTransport::default(),
);
let transport = relay_transport
.upgrade(upgrade::Version::V1)
.authenticate(plaintext)
.multiplex(YamuxConfig::default())
.boxed();
let mut swarm = Swarm::new(transport, relay_behaviour, local_peer_id);
let relay_addr = Multiaddr::from_str("/memory/1234").unwrap()
.with(Protocol::P2p(PeerId::random().into()))
.with(Protocol::P2pCircuit);
let dst_addr = relay_addr.clone().with(Protocol::Memory(5678));
// Listen for incoming connections via relay node (1234).
Swarm::listen_on(&mut swarm, relay_addr).unwrap();
// Dial node (5678) via relay node (1234).
Swarm::dial_addr(&mut swarm, dst_addr).unwrap();
```
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
Co-authored-by: David Craven <david@craven.ch>
