Previously, the `libp2p-ping` module came with a policy to close a connection after X failed pings. This is only one of many possible policies on how users would want to do connection management.
We remove this policy without a replacement. If users wish to restore this functionality, they can easily implement such policy themselves: The default value of `max_failures` was 1. To restore the previous functionality users can simply close the connection upon the first received ping error.
In this same patch, we also simplify the API of `ping::Event` by removing the layer of `ping::Success` and instead reporting the RTT to the peer directly.
Related: #3591.
Pull-Request: #3947.
This patch adds two modules to `libp2p::request_response`:
- `cbor`
- `json`
Both define a `Behaviour` type-alias that comes with a `Codec` implementation which uses the respective `serde` crate to serialize and deserialize the messages.
Fixes#3905.
Pull-Request: #3952.
Previously, a `NetworkBehaviour` could report an `AddressScore` for an external address. This score was a `u32` and addresses would be ranked amongst those.
In reality, an address is either confirmed to be publicly reachable (via a protocol such as AutoNAT) or merely represents a candidate that might be an external address. In a way, addresses are guilty (private) until proven innocent (publicly reachable).
When a `NetworkBehaviour` reports an address candidate, we perform address translation on it to potentially correct for ephemeral ports of TCP. These candidates are then injected back into the `NetworkBehaviour`. Protocols such as AutoNAT can use these addresses as a source for probing their NAT status. Once confirmed, they can emit a `ToSwarm::ExternalAddrConfirmed` event which again will be passed to all `NetworkBehaviour`s.
This simplified approach will allow us implement Kademlia's client-mode (https://github.com/libp2p/rust-libp2p/issues/2032) without additional configuration options: As soon as an address is reported as publicly reachable, we can activate server-mode for that connection.
Related: https://github.com/libp2p/rust-libp2p/pull/3877.
Related: https://github.com/libp2p/rust-libp2p/issues/3953.
Related: https://github.com/libp2p/rust-libp2p/issues/2032.
Related: https://github.com/libp2p/go-libp2p/issues/2229.
Co-authored-by: Max Inden <mail@max-inden.de>
Pull-Request: #3954.
Previously we would increase a counter / gauge / histogram on each received identify information. These metrics are missleading, as e.g. they depend on the identify interval and don't represent the set of currently connected peers.
With this commit, identify information is tracked for the currently connected peers only. Instead of an increase on each received identify information, metrics represent the status quo (Gauge).
Example:
```
\# HELP libp2p_libp2p_identify_remote_protocols Number of connected nodes supporting a specific protocol, with "unrecognized" for each peer supporting one or more unrecognized protocols...
\# TYPE libp2p_libp2p_identify_remote_protocols gauge
libp2p_libp2p_identify_remote_protocols_total{protocol="/ipfs/id/push/1.0.0"} 1
libp2p_libp2p_identify_remote_protocols_total{protocol="/ipfs/id/1.0.0"} 1
libp2p_libp2p_identify_remote_protocols_total{protocol="/ipfs/ping/1.0.0"} 1
libp2p_libp2p_identify_remote_protocols_total{protocol="unrecognized"} 1
\# HELP libp2p_libp2p_identify_remote_listen_addresses Number of connected nodes advertising a specific listen address...
\# TYPE libp2p_libp2p_identify_remote_listen_addresses gauge
libp2p_libp2p_identify_remote_listen_addresses_total{listen_address="/ip4/tcp"} 1
libp2p_libp2p_identify_remote_listen_addresses_total{listen_address="/ip4/udp/quic"} 1
\# HELP libp2p_libp2p_identify_local_observed_addresses Number of connected nodes observing the local node at a specific address...
\# TYPE libp2p_libp2p_identify_local_observed_addresses gauge
libp2p_libp2p_identify_local_observed_addresses_total{observed_address="/ip4/tcp"} 1
```
Pull-Request: #3325.
Previously, the associated types on `NetworkBehaviour` and `ConnectionHandler` carried generic names like `InEvent` and `OutEvent`. These names are _correct_ in that `OutEvent`s are passed out and `InEvent`s are passed in but they don't help users understand how these types are used.
In theory, a `ConnectionHandler` could be used separately from `NetworkBehaviour`s but that is highly unlikely. Thus, we rename these associated types to indicate, where the message is going to be sent to:
- `NetworkBehaviour::OutEvent` is renamed to `ToSwarm`: It describes the message(s) a `NetworkBehaviour` can emit to the `Swarm`. The user is going to receive those in `SwarmEvent::Behaviour`.
- `ConnectionHandler::InEvent` is renamed to `FromBehaviour`: It describes the message(s) a `ConnectionHandler` can receive from its behaviour via `ConnectionHandler::on_swarm_event`. The `NetworkBehaviour` can send it via the `ToSwarm::NotifyHandler` command.
- `ConnectionHandler::OutEvent` is renamed to `ToBehaviour`: It describes the message(s) a `ConnectionHandler` can send back to the behaviour via the now also renamed `ConnectionHandlerEvent::NotifyBehaviour` (previously `ConnectionHandlerEvent::Custom`)
Resolves: #2854.
Pull-Request: #3848.
The currently provided `ConnectionHandlerUpgrErr` is very hard to use. Not only does it have a long name, it also features 3 levels of nesting which results in a lot of boilerplate. Last but not least, it exposes `multistream-select` as a dependency to all protocols.
We fix all of the above by renaming the type to `StreamUpgradeError` and flattening out its interface. Unrecoverable errors during protocol selection are hidden within the `Io` variant.
Related: #3759.
Pull-Request: #3882.
Previously, a protocol could be any sequence of bytes as long as it started with `/`. Now, we directly parse a protocol as `String` which enforces it to be valid UTF8.
To notify users of this change, we delete the `ProtocolName` trait. The new requirement is that users need to provide a type that implements `AsRef<str>`.
We also add a `StreamProtocol` newtype in `libp2p-swarm` which provides an easy way for users to ensure their protocol strings are compliant. The newtype enforces that protocol strings start with `/`. `StreamProtocol` also implements `AsRef<str>`, meaning users can directly use it in their upgrades.
`multistream-select` by itself only changes marginally with this patch. The only thing we enforce in the type-system is that protocols must implement `AsRef<str>`.
Resolves: #2831.
Pull-Request: #3746.
In the libp2p specs, the only handshake pattern that is specified is the XX handshake. Support for other handshake patterns can be added through external modules. While we are at it, we rename the remaining types to following the laid out naming convention.
The tests for handshakes other than XX are removed. The handshakes still work as we don't touch them in this patch.
Related #2217.
Pull-Request: #3768.
The `unreachable_pub` lint makes us aware of uses of `pub` that are not actually reachable from the crate root. This is considered good because it means reading a `pub` somewhere means it is actually public API. Some of our crates are quite large and keeping their entire API surface in your head is difficult.
We should strive for most items being `pub(crate)`. This lint helps us enforce that.
Pull-Request: #3735.
Due to cargo's feature unification, a full build of our workspace doesn't actually check whether the examples compile as standalone projects.
We add a new CI check that iterates through all crates in the `examples/` directory and runs a plain `cargo check` on them. Any failure is bubbled up via `set -e`, thus failing CI in case one of the `cargo check` commands fails.
To fix the current failures, we construct a simple TCP transport everywhere where we were previously using `development_transport`. That is because `development_transport` requires `mplex` which is now deprecated.
Related #3657.
Related #3809.
Pull-Request: #3811.
Mark constructors `Swarm::with_X_executor` as deprecated.
Move the deprecated functionality to `SwarmBuilder::with_X_executor`
Use `SwarmBuilder` throughout.
Resolves#3186.
Resolves#3107.
Pull-Request: #3588.
Currently, our top-level `Cargo.toml` manifest represents a crate AND a workspace. This causes surprising behaviour (e.g. #2949) where we need to explicitly pass `--workpace` to every command to run it on the entire workspace and not just the meta crate.
My moving the meta crate into its own directory, the root manifest file is a virtual manifest only and thus, every `cargo` command will automatically default to running on the entire workspace.
On top of this, I personally find it easier to understand if workspace and crate manifests are not mixed.
Pull-Request: #3536.
While following the ping tutorial myself, I noticed it was out of date from the ping example in `examples/ping.rs`, and the code given in the tutorial no longer cleanly builds. I decided to update the tutorial to build the exact code in the example.
With #3097, subscribing to the floodsub topic in `examples/chat-tokio.rs` was removed. I assume this was unintentional (cc @umgefahren), so this PR adds it back.
As I do frequently, I corrected for the latest clippy warnings. This will make sure the CI won't complain in the future. We could automate this btw and maybe run the nightly version of clippy.
This patch deprecates 3 out of 4 functions on `PollParameters`:
- `local_peer_id`
- `listened_addresses`
- `external_addresses`
The addresses can be obtained by inspecting the `FromSwarm` event. To make this easier, we introduce two utility structs in `libp2p-swarm`:
- `ExternalAddresses`
- `ListenAddresses`
A node's `PeerId` is always known to the caller, thus we can require them to pass it in.
Related: #3124.
