Previously, the associated types on `NetworkBehaviour` and `ConnectionHandler` carried generic names like `InEvent` and `OutEvent`. These names are _correct_ in that `OutEvent`s are passed out and `InEvent`s are passed in but they don't help users understand how these types are used.
In theory, a `ConnectionHandler` could be used separately from `NetworkBehaviour`s but that is highly unlikely. Thus, we rename these associated types to indicate, where the message is going to be sent to:
- `NetworkBehaviour::OutEvent` is renamed to `ToSwarm`: It describes the message(s) a `NetworkBehaviour` can emit to the `Swarm`. The user is going to receive those in `SwarmEvent::Behaviour`.
- `ConnectionHandler::InEvent` is renamed to `FromBehaviour`: It describes the message(s) a `ConnectionHandler` can receive from its behaviour via `ConnectionHandler::on_swarm_event`. The `NetworkBehaviour` can send it via the `ToSwarm::NotifyHandler` command.
- `ConnectionHandler::OutEvent` is renamed to `ToBehaviour`: It describes the message(s) a `ConnectionHandler` can send back to the behaviour via the now also renamed `ConnectionHandlerEvent::NotifyBehaviour` (previously `ConnectionHandlerEvent::Custom`)
Resolves: #2854.
Pull-Request: #3848.
Previously, a protocol could be any sequence of bytes as long as it started with `/`. Now, we directly parse a protocol as `String` which enforces it to be valid UTF8.
To notify users of this change, we delete the `ProtocolName` trait. The new requirement is that users need to provide a type that implements `AsRef<str>`.
We also add a `StreamProtocol` newtype in `libp2p-swarm` which provides an easy way for users to ensure their protocol strings are compliant. The newtype enforces that protocol strings start with `/`. `StreamProtocol` also implements `AsRef<str>`, meaning users can directly use it in their upgrades.
`multistream-select` by itself only changes marginally with this patch. The only thing we enforce in the type-system is that protocols must implement `AsRef<str>`.
Resolves: #2831.
Pull-Request: #3746.
Previously, we would specify the version and path of our workspace dependencies in each of our crates. This is error prone as https://github.com/libp2p/rust-libp2p/pull/3658#discussion_r1153278072 for example shows. Problems like these happened in the past too.
There is no need for us to ever depend on a earlier version than the most current one in our crates. It thus makes sense that we manage this version in a single place.
Cargo supports a feature called "workspace inheritance" which allows us to share a dependency declaration across a workspace and inherit it with `{ workspace = true }`.
We do this for all our workspace dependencies and for the MSRV.
Resolves#3787.
Pull-Request: #3715.
The `unreachable_pub` lint makes us aware of uses of `pub` that are not actually reachable from the crate root. This is considered good because it means reading a `pub` somewhere means it is actually public API. Some of our crates are quite large and keeping their entire API surface in your head is difficult.
We should strive for most items being `pub(crate)`. This lint helps us enforce that.
Pull-Request: #3735.
Autonat uses `Vec` for the servers field to hold a list of `PeerId` when calling `Behaviour::add_server`, but there is no check to prevent duplicated entries of the `PeerId`, which would cause unnecessary allocation overtime with repeated calls to the function.
Resolves#3733.
Pull-Request: #3736.
With https://github.com/libp2p/rust-libp2p/pull/3658, these crates depend on the `0.42.1` release to access the new `ToSwarm` type. With the currently specified version, a user could theoretically run into a compile error if they pin `libp2p-swarm` to `0.42.0` in their lockfile but update to the latest patch release of one of these crates.
Pull-Request: #3711.
Mark constructors `Swarm::with_X_executor` as deprecated.
Move the deprecated functionality to `SwarmBuilder::with_X_executor`
Use `SwarmBuilder` throughout.
Resolves#3186.
Resolves#3107.
Pull-Request: #3588.
This patch-set introduces `libp2p-swarm-test`. It provides utilities for quick and safe bootstrapping of tests for `NetworkBehaviour`s. The main design features are:
- Everything has timeouts
- APIs don't get in your way
- Minimal boilerplate
Closes#2884.
Pull-Request: #2888.
Instead of relying on `protoc` and buildscripts, we generate the bindings using `pb-rs` and version them within our codebase. This makes for a better IDE integration, a faster build and an easier use of `rust-libp2p` because we don't force the `protoc` dependency onto them.
Resolves#3024.
Pull-Request: #3312.
A large release with lots of changes I am looking forward to. Sorry for the long release cadence.
Anything folks would like to see included that is not yet in `master`? As usual I would like to only block on bug fixes.
Pull-Request: #3491.
Prefixing a variable with an underscore (`_`) in Rust indicates that it is not used. Through refactorings, it can sometimes happen that we do end up using such a variable. In this case, the underscore should be removed.
Clippy can help us with this.
Pull-Request: #3484.
Previously, a `ConnectionHandler` was immediately requested from the `NetworkBehaviour` as soon as a new dial was initiated or a new incoming connection accepted.
With this patch, we delay the creation of the handler until the connection is actually established and fully upgraded, i.e authenticated and multiplexed.
As a consequence, `NetworkBehaviour::new_handler` is now deprecated in favor of a new set of callbacks:
- `NetworkBehaviour::handle_pending_inbound_connection`
- `NetworkBehaviour::handle_pending_outbound_connection`
- `NetworkBehaviour::handle_established_inbound_connection`
- `NetworkBehaviour::handle_established_outbound_connection`
All callbacks are fallible, allowing the `NetworkBehaviour` to abort the connection either immediately or after it is fully established. All callbacks also receive a `ConnectionId` parameter which uniquely identifies the connection. For example, in case a `NetworkBehaviour` issues a dial via `NetworkBehaviourAction::Dial`, it can unambiguously detect this dial in these lifecycle callbacks via the `ConnectionId`.
Finally, `NetworkBehaviour::handle_pending_outbound_connection` also replaces `NetworkBehaviour::addresses_of_peer` by allowing the behaviour to return more addresses to be used for the dial.
Resolves#2824.
Pull-Request: #3254.
We create the `ConnectionId` for the new connection as part of `DialOpts`. This allows `NetworkBehaviour`s to accurately track state regarding their own dial attempts.
This patch is the main enabler of https://github.com/libp2p/rust-libp2p/pull/3254. Removing the `handler` field will allow us to deprecate the `NetworkBehaviour::new_handler` function in favor of four new ones that give more control over the connection lifecycle.
Previously, we used the full reference to the `OutEvent` of the `ConnectionHandler` in all implementations of `NetworkBehaviour`. Not only is this very verbose, it is also more brittle to changes. With the current implementation plan for #2824, we will be removing the `IntoConnectionHandler` abstraction. Using a type-alias to refer to the `OutEvent` makes the migration much easier.
With this commit `libp2p-autonat` no longer discards the whole remote payload in case an addr is unparsable, but instead logs the failure and skips the unparsable multiaddr.
See libp2p#3244 for details.
Previously, we used to buffer events separately and emit actions directly. That is unnecessary. We can have a single place where we return from the `poll` loop and shove all actions into the same buffer.
As I do frequently, I corrected for the latest clippy warnings. This will make sure the CI won't complain in the future. We could automate this btw and maybe run the nightly version of clippy.
This patch deprecates 3 out of 4 functions on `PollParameters`:
- `local_peer_id`
- `listened_addresses`
- `external_addresses`
The addresses can be obtained by inspecting the `FromSwarm` event. To make this easier, we introduce two utility structs in `libp2p-swarm`:
- `ExternalAddresses`
- `ListenAddresses`
A node's `PeerId` is always known to the caller, thus we can require them to pass it in.
Related: #3124.
We refactor our continuous integration workflow with the following goals in mind:
- Run as few jobs as possible
- Have the jobs finish as fast as possible
- Have the jobs redo as little work as possible
There are only so many jobs that GitHub Actions will run in parallel.
Thus, it makes sense to not create massive matrices but instead group
things together meaningfully.
The new `test` job will:
- Run once for each crate
- Ensure that the crate compiles on its specified MSRV
- Ensure that the tests pass
- Ensure that there are no semver violations
This is an improvement to before because we are running all of these
in parallel which speeds up execution and highlights more errors at
once. Previously, tests run later in the pipeline would not get run
at all until you make sure the "first" one passes.
We also previously did not verify the MSRV of each crate, making the
setting in the `Cargo.toml` rather pointless.
The new `cross` job supersedes the existing `wasm` job.
This is an improvement because we now also compile the crate for
windows and MacOS. Something that wasn't checked before.
We assume that checking MSRV and the tests under Linux is good enough.
Hence, this job only checks for compile-errors.
The new `feature_matrix` ensures we compile correctly with certain feature combinations.
`libp2p` exposes a fair few feature-flags. Some of the combinations
are worth checking independently. For the moment, this concerns only
the executor related transports together with the executor flags but
this list can easily be extended.
The new `clippy` job runs for `stable` and `beta` rust.
Clippy gets continuously extended with new lints. Up until now, we would only
learn about those as soon as a new version of Rust is released and CI would
run the new lints. This leads to unrelated failures in CI. Running clippy on with `beta`
Rust gives us a heads-up of 6 weeks before these lints land on stable.
Fixes#2951.
Previously, the executor for connection tasks silently defaulted to a `futures::executor::ThreadPool`. This causes issues such as https://github.com/libp2p/rust-libp2p/issues/2230.
With this patch, we force the user to choose, which executor they want to run the connection tasks on which results in overall simpler API with less footguns.
Closes#3068.
Currently, our `NetworkBehaviour` derive macro depends on the `libp2p` crate to be in scope. This prevents standalone usage which forces us to depend on `libp2p` in all our tests where we want to derive a `NetworkBehaviour`.
This PR introduces a `prelude` option that - by default - points to `libp2p::swarm::derive_prelude`, a new module added to `libp2p_swarm`. With this config option, users of `libp2p_swarm` can now refer to the macro without depending on `libp2p`, breaking the circular dependency in our workspace. For consistency with the ecosystem, the macro is now also re-exported by `libp2p_swarm` instead of `libp2p` at the same position as the trait that it implements.
Lastly, we introduce an off-by-default `macros` feature flag that shrinks the dependency tree for users that don't need the derive macro.
