Peer discovery with mDNS can be very slow, particularly if the first mDNS query is lost. This patch resolves it by adjusting the timer with an adaptive initial interval. We start with a very short timer (500 ms). If a peer is discovered before the end of the timer, then the timer is reset to the normal query interval value (300s), otherwise the timer's value is multiplied by 2 until it reaches the normal query interval value.
Related: https://github.com/libp2p/rust-libp2p/pull/3323.
Resolves: https://github.com/libp2p/rust-libp2p/issues/3319.
Pull-Request: #3975.
Previously, a `NetworkBehaviour` could report an `AddressScore` for an external address. This score was a `u32` and addresses would be ranked amongst those.
In reality, an address is either confirmed to be publicly reachable (via a protocol such as AutoNAT) or merely represents a candidate that might be an external address. In a way, addresses are guilty (private) until proven innocent (publicly reachable).
When a `NetworkBehaviour` reports an address candidate, we perform address translation on it to potentially correct for ephemeral ports of TCP. These candidates are then injected back into the `NetworkBehaviour`. Protocols such as AutoNAT can use these addresses as a source for probing their NAT status. Once confirmed, they can emit a `ToSwarm::ExternalAddrConfirmed` event which again will be passed to all `NetworkBehaviour`s.
This simplified approach will allow us implement Kademlia's client-mode (https://github.com/libp2p/rust-libp2p/issues/2032) without additional configuration options: As soon as an address is reported as publicly reachable, we can activate server-mode for that connection.
Related: https://github.com/libp2p/rust-libp2p/pull/3877.
Related: https://github.com/libp2p/rust-libp2p/issues/3953.
Related: https://github.com/libp2p/rust-libp2p/issues/2032.
Related: https://github.com/libp2p/go-libp2p/issues/2229.
Co-authored-by: Max Inden <mail@max-inden.de>
Pull-Request: #3954.
Previously, the associated types on `NetworkBehaviour` and `ConnectionHandler` carried generic names like `InEvent` and `OutEvent`. These names are _correct_ in that `OutEvent`s are passed out and `InEvent`s are passed in but they don't help users understand how these types are used.
In theory, a `ConnectionHandler` could be used separately from `NetworkBehaviour`s but that is highly unlikely. Thus, we rename these associated types to indicate, where the message is going to be sent to:
- `NetworkBehaviour::OutEvent` is renamed to `ToSwarm`: It describes the message(s) a `NetworkBehaviour` can emit to the `Swarm`. The user is going to receive those in `SwarmEvent::Behaviour`.
- `ConnectionHandler::InEvent` is renamed to `FromBehaviour`: It describes the message(s) a `ConnectionHandler` can receive from its behaviour via `ConnectionHandler::on_swarm_event`. The `NetworkBehaviour` can send it via the `ToSwarm::NotifyHandler` command.
- `ConnectionHandler::OutEvent` is renamed to `ToBehaviour`: It describes the message(s) a `ConnectionHandler` can send back to the behaviour via the now also renamed `ConnectionHandlerEvent::NotifyBehaviour` (previously `ConnectionHandlerEvent::Custom`)
Resolves: #2854.
Pull-Request: #3848.
In previous PR #3606 we've made `mdns::Event` `Clone`, but cloning single-use iterators doesn't sound right. Also you have to create an iterator from the actual data returned before putting it into events. So in this PR the iterators are replaced by `Vec`, as it's the type the data originally come from.
Related #3612.
Pull-Request: #3621.
The `unreachable_pub` lint makes us aware of uses of `pub` that are not actually reachable from the crate root. This is considered good because it means reading a `pub` somewhere means it is actually public API. Some of our crates are quite large and keeping their entire API surface in your head is difficult.
We should strive for most items being `pub(crate)`. This lint helps us enforce that.
Pull-Request: #3735.
Derive trait `Clone` for `mdns::Event`. This makes cloning its contents without destroying type information possible.
Related #3593.
Pull-Request: #3606.
Previously, a `ConnectionHandler` was immediately requested from the `NetworkBehaviour` as soon as a new dial was initiated or a new incoming connection accepted.
With this patch, we delay the creation of the handler until the connection is actually established and fully upgraded, i.e authenticated and multiplexed.
As a consequence, `NetworkBehaviour::new_handler` is now deprecated in favor of a new set of callbacks:
- `NetworkBehaviour::handle_pending_inbound_connection`
- `NetworkBehaviour::handle_pending_outbound_connection`
- `NetworkBehaviour::handle_established_inbound_connection`
- `NetworkBehaviour::handle_established_outbound_connection`
All callbacks are fallible, allowing the `NetworkBehaviour` to abort the connection either immediately or after it is fully established. All callbacks also receive a `ConnectionId` parameter which uniquely identifies the connection. For example, in case a `NetworkBehaviour` issues a dial via `NetworkBehaviourAction::Dial`, it can unambiguously detect this dial in these lifecycle callbacks via the `ConnectionId`.
Finally, `NetworkBehaviour::handle_pending_outbound_connection` also replaces `NetworkBehaviour::addresses_of_peer` by allowing the behaviour to return more addresses to be used for the dial.
Resolves#2824.
Pull-Request: #3254.
We create the `ConnectionId` for the new connection as part of `DialOpts`. This allows `NetworkBehaviour`s to accurately track state regarding their own dial attempts.
This patch is the main enabler of https://github.com/libp2p/rust-libp2p/pull/3254. Removing the `handler` field will allow us to deprecate the `NetworkBehaviour::new_handler` function in favor of four new ones that give more control over the connection lifecycle.
Previously, we used the full reference to the `OutEvent` of the `ConnectionHandler` in all implementations of `NetworkBehaviour`. Not only is this very verbose, it is also more brittle to changes. With the current implementation plan for #2824, we will be removing the `IntoConnectionHandler` abstraction. Using a type-alias to refer to the `OutEvent` makes the migration much easier.
This patch deprecates 3 out of 4 functions on `PollParameters`:
- `local_peer_id`
- `listened_addresses`
- `external_addresses`
The addresses can be obtained by inspecting the `FromSwarm` event. To make this easier, we introduce two utility structs in `libp2p-swarm`:
- `ExternalAddresses`
- `ListenAddresses`
A node's `PeerId` is always known to the caller, thus we can require them to pass it in.
Related: #3124.
Previously, the `DummyConnectionHandler` offered a "keep alive" functionality,
i.e. it allowed users to set the value of what is returned from
`ConnectionHandler::keep_alive`. This handler is primarily used in tests or
`NetworkBehaviour`s that don't open any connections (like mDNS). In all of these
cases, it is statically known whether we want to keep connections alive. As
such, this functionality is better represented by a static
`KeepAliveConnectionHandler` that always returns `KeepAlive::Yes` and a
`DummyConnectionHandler` that always returns `KeepAlive::No`.
To follow the naming conventions described in
https://github.com/libp2p/rust-libp2p/issues/2217, we introduce a top-level
`keep_alive` and `dummy` behaviour in `libp2p-swarm` that contains both the
`NetworkBehaviour` and `ConnectionHandler` implementation for either case.
Allow users to choose between async-io and tokio runtime
in the mdns protocol implementation. `async-io` is a default
feature, with an additional `tokio` feature.
Fix high CPU usage with Tokio library.
Remove the concept of individual `Transport::Listener` streams from `Transport`.
Instead the `Transport` is polled directly via `Transport::poll`. The
`Transport` is now responsible for driving its listeners.
A `ProtocolsHandler`, now `ConnectionHandler`, handels a connection, not
a protocol. Thus the name `CONNECTIONHandler` is more appropriate.
Next to the rename of `ProtocolsHandler` this commit renames the `mod
protocols_handler` to `mod handler`. Finally all combinators (e.g.
`ProtocolsHandlerSelect`) are renamed appropriately.
Handling multiple interfaces in mdns. The socket logic was moved into an
instance while the mdns behaviour watches for interface changes and creates new
instances with a dedicated send/recv socket.
Co-authored-by: Max Inden <mail@max-inden.de>
With https://github.com/libp2p/specs/pull/368 the definition of the _peer name_
changed in the mDNS specification.
> peer-name is the case-insensitive unique identifier of the peer, and is less
> than 64 characters.
>
> As the this field doesn't carry any meaning, it is sufficient to ensure the
> uniqueness of this identifier. Peers SHOULD generate a random, lower-case
> alphanumeric string of least 32 characters in length when booting up their
> node. Peers SHOULD NOT use their Peer ID here because a future Peer ID could
> exceed the DNS label limit of 63 characters.
https://github.com/libp2p/specs/blob/master/discovery/mdns.md
This commit adjusts `libp2p-mdns` accordingly.
Also see https://github.com/libp2p/go-libp2p/pull/1222 for the corresponding
change on the Golang side.
Co-authored-by: Max Inden <mail@max-inden.de>
Require `NetworkBehaviourAction::{DialPeer,DialAddress}` to contain a
`ProtocolsHandler`. This allows a behaviour to attach custom state to its
handler. The behaviour would no longer need to track this state separately
during connection establishment, thus reducing state required in a behaviour.
E.g. in the case of `libp2p-kad` the behaviour can include a `GetRecord` request
in its handler, or e.g. in the case of `libp2p-request-response` the behaviour
can include the first request in the handler.
Return `ProtocolsHandler` on connection error and close. This allows a behaviour
to extract its custom state previously included in the handler on connection
failure and connection closing. E.g. in the case of `libp2p-kad` the behaviour
could extract the attached `GetRecord` from the handler of the failed connection
and then start another connection attempt with a new handler with the same
`GetRecord` or bubble up an error to the user.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Signed-off-by: Emil Majchrzak <majchrzakemil@gitlab.com>
Co-authored-by: Emil Majchrzak <majchrzakemil@gitlab.com>
Co-authored-by: Max Inden <mail@max-inden.de>
Not all implementations of `NetworkBehaviour` need all callbacks.
We've have been adding new callbacks with default implementations
for a while now. There is no reason the initial ones cannot also
be defaulted, thus making it easier create new implementations.
Co-authored-by: Max Inden <mail@max-inden.de>
- Change `PublicKey::into_protobuf_encoding` to
`PublicKey::to_protobuf_encoding`.
- Change `PublicKey::into_peer_id` to `PublicKey::to_peer_id`.
- Change `PeerId::from_public_key(PublicKey)` to
`PeerId::from_public_key(&PublicKey)`.
- Add `From<&PublicKey> for PeerId`.
Co-authored-by: Max Inden <mail@max-inden.de>
* Fix needless question mark operator
* Don't convert from u64 to u64
LocalStreamId is already a u64, no need to convert.
* Don't use `.into()` to convert to the same type
* Don't specify lifetime if it can be inferred
* Use `vec!` macro if we immediately push to it
This creates the vector with the appropriate capacity.
* Don't index array when taking a reference is enough
Co-authored-by: Max Inden <mail@max-inden.de>
mdns keeps rediscovering nodes. this PR changes that to only emit events for new
nodes it discovered. In addition we make sure to only send a query if it is
really needed. Some logging is added for debugging purposes.
If you start listening after mdns joined a multicast group, the peers may not
discover eachother until the 5min timeout expires.
Co-authored-by: Max Inden <mail@max-inden.de>
