The currently provided `ConnectionHandlerUpgrErr` is very hard to use. Not only does it have a long name, it also features 3 levels of nesting which results in a lot of boilerplate. Last but not least, it exposes `multistream-select` as a dependency to all protocols.
We fix all of the above by renaming the type to `StreamUpgradeError` and flattening out its interface. Unrecoverable errors during protocol selection are hidden within the `Io` variant.
Related: #3759.
Pull-Request: #3882.
This removes the deprecated `IntoConnectionHandler` trait and all its implementations. Consequently, `NetworkBehaviour::new_handler` and `NetworkBehaviour::addresses_of_peer` are now gone and the two `handle_` functions are now required to implement.
Related: #3647.
Pull-Request: #3884.
When an inbound stream upgrade fails, there isn't a whole lot we can do about that in the handler. In fact, for several errors, we wouldn't even know which specific handler to target, for example, `NegotiationFailed`. Similiarly, in case of an IO error during the upgrade, we don't know which handler the stream was eventually meant to be for.
Pull-Request: #3605.
Previously, a user wouldn't know whether passing a `SwarmEvent` to `ListenAddresses` or `ExternalAddresses` changed the state. We now return a boolean where `true` indicates that we handled the event **and** changed state as a result.
The API is inspired by `HashSet::insert` and the like.
Pull-Request: #3865.
Previously, a protocol could be any sequence of bytes as long as it started with `/`. Now, we directly parse a protocol as `String` which enforces it to be valid UTF8.
To notify users of this change, we delete the `ProtocolName` trait. The new requirement is that users need to provide a type that implements `AsRef<str>`.
We also add a `StreamProtocol` newtype in `libp2p-swarm` which provides an easy way for users to ensure their protocol strings are compliant. The newtype enforces that protocol strings start with `/`. `StreamProtocol` also implements `AsRef<str>`, meaning users can directly use it in their upgrades.
`multistream-select` by itself only changes marginally with this patch. The only thing we enforce in the type-system is that protocols must implement `AsRef<str>`.
Resolves: #2831.
Pull-Request: #3746.
Previously, we would specify the version and path of our workspace dependencies in each of our crates. This is error prone as https://github.com/libp2p/rust-libp2p/pull/3658#discussion_r1153278072 for example shows. Problems like these happened in the past too.
There is no need for us to ever depend on a earlier version than the most current one in our crates. It thus makes sense that we manage this version in a single place.
Cargo supports a feature called "workspace inheritance" which allows us to share a dependency declaration across a workspace and inherit it with `{ workspace = true }`.
We do this for all our workspace dependencies and for the MSRV.
Resolves#3787.
Pull-Request: #3715.
The `unreachable_pub` lint makes us aware of uses of `pub` that are not actually reachable from the crate root. This is considered good because it means reading a `pub` somewhere means it is actually public API. Some of our crates are quite large and keeping their entire API surface in your head is difficult.
We should strive for most items being `pub(crate)`. This lint helps us enforce that.
Pull-Request: #3735.
Previously, we closed the entire connection upon receiving too many upgrade errors. This is unnecessarily aggressive. For example, an upgrade error may be caused by the remote dropping a stream during the initial handshake which is completely isolated from other protocols running on the same connection.
Instead of closing the connection, set `KeepAlive::No`.
Related: #3591.
Resolves: #3690.
Pull-Request: #3625.
This tiny PR contains a proposed change for the warning related to the exceeded pending incoming connections limit. This warning can't be controlled and causes user confusion. It contains useful technical info but IMHO should be downgraded from `warn` to `debug`.
Pull-Request: #3671.
Currently, banning peers is a first-class feature of `Swarm`. With the new connection management capabilities of `NetworkBehaviour`, we can now implement allow and block lists as a separate module.
We introduce a new crate `libp2p-allow-block-list` and deprecate `Swarm::ban_peer_id` in favor of that.
Related #2824.
Pull-Request: #3590.
In earlier iterations of the design for generic connection management, we removed the `ConnectionId::new` constructor because it would have allowed users to create `ConnectionId`s that are already taken, thus breaking invariants that `NetworkBehaviour`s rely on. Later, we incorporated the creation of `ConnectionId` in `DialOpts` which mitigates this risk altogether.
Thus, it is reasonably safe to introduce a public, non-deprecated constructor for `ConnectionId` that can be used for tests.
Related https://github.com/libp2p/rust-libp2p/pull/3327#issuecomment-1469870307.
Pull-Request: #3652.
This patch deprecates the existing connection limits within `Swarm` and uses the new `NetworkBehaviour` APIs to implement it as a plugin instead.
Related #2824.
Pull-Request: #3386.
Mark constructors `Swarm::with_X_executor` as deprecated.
Move the deprecated functionality to `SwarmBuilder::with_X_executor`
Use `SwarmBuilder` throughout.
Resolves#3186.
Resolves#3107.
Pull-Request: #3588.
This patch-set introduces `libp2p-swarm-test`. It provides utilities for quick and safe bootstrapping of tests for `NetworkBehaviour`s. The main design features are:
- Everything has timeouts
- APIs don't get in your way
- Minimal boilerplate
Closes#2884.
Pull-Request: #2888.
A large release with lots of changes I am looking forward to. Sorry for the long release cadence.
Anything folks would like to see included that is not yet in `master`? As usual I would like to only block on bug fixes.
Pull-Request: #3491.
Prefixing a variable with an underscore (`_`) in Rust indicates that it is not used. Through refactorings, it can sometimes happen that we do end up using such a variable. In this case, the underscore should be removed.
Clippy can help us with this.
Pull-Request: #3484.
Previously, a `ConnectionHandler` was immediately requested from the `NetworkBehaviour` as soon as a new dial was initiated or a new incoming connection accepted.
With this patch, we delay the creation of the handler until the connection is actually established and fully upgraded, i.e authenticated and multiplexed.
As a consequence, `NetworkBehaviour::new_handler` is now deprecated in favor of a new set of callbacks:
- `NetworkBehaviour::handle_pending_inbound_connection`
- `NetworkBehaviour::handle_pending_outbound_connection`
- `NetworkBehaviour::handle_established_inbound_connection`
- `NetworkBehaviour::handle_established_outbound_connection`
All callbacks are fallible, allowing the `NetworkBehaviour` to abort the connection either immediately or after it is fully established. All callbacks also receive a `ConnectionId` parameter which uniquely identifies the connection. For example, in case a `NetworkBehaviour` issues a dial via `NetworkBehaviourAction::Dial`, it can unambiguously detect this dial in these lifecycle callbacks via the `ConnectionId`.
Finally, `NetworkBehaviour::handle_pending_outbound_connection` also replaces `NetworkBehaviour::addresses_of_peer` by allowing the behaviour to return more addresses to be used for the dial.
Resolves#2824.
Pull-Request: #3254.
This commit does two things:
- Check that swarm1, given that it has no ban, establishes 21 connections and swarm2, given that it has a ban, establishes 20 connections.
- Wait for swarm1 to notice disconnect, given that swarm2 closed the connection to the banned swarm1.
Fixes flake introduced in caed1fe2c7.
We create the `ConnectionId` for the new connection as part of `DialOpts`. This allows `NetworkBehaviour`s to accurately track state regarding their own dial attempts.
This patch is the main enabler of https://github.com/libp2p/rust-libp2p/pull/3254. Removing the `handler` field will allow us to deprecate the `NetworkBehaviour::new_handler` function in favor of four new ones that give more control over the connection lifecycle.
This PR isolates the bugfix for the `NetworkBehaviour` derive implementation for structures with generic fields. When `out_event` was not provided, the generated enum was missing the `NetworkBehaviour` impl constraint for the generic variants whilst using the generics for `<Generic>::OutEvent`.
Meanwhile I also found that the generated `poll` function `loop`s the sub behaviours and either `return`'s when `Poll::Ready` or `break`'s when `Poll::Pending`. This is a relict from when we still had `NetworkBehaviourEventProcess` which had added a branch within this loop that did not `return` but consume the event and `continue`. This trait was removed a while ago meaning this `loop` is no longer needed.
Most of this is trivial, apart from the rename of the `clippy::derive_hash_xor_eq` lint to `clippy::derived_hash_with_manual_eq`.
Instead of allowing that lint, we manually implement `PartialEq` and add a comment why the difference between the `PartialEq` and `Hash` implementations are okay.
In case an error happens for an outgoing connection, `Pool` reports an `OutgoingConnectionError`. This one is mapped to a `DialError` and reported via `SwarmEvent::OutgoingConnectionError` and `FromSwarm::DialFailure`.
For incoming connections, we didn't quite do the same thing. For one, `SwarmEvent::IncomingConnectionError` directly contained a `PendingInboundConnectionError`. Two, `FromSwarm::ListenFailure` did not include an error at all.
With this patch, we now introduce a `ListenError` enum which we use in `SwarmEvent::IncomingConnectionError` and we pass a reference to it along in `FromSwarm::ListenFailure`.
Previously, we used the full reference to the `OutEvent` of the `ConnectionHandler` in all implementations of `NetworkBehaviour`. Not only is this very verbose, it is also more brittle to changes. With the current implementation plan for #2824, we will be removing the `IntoConnectionHandler` abstraction. Using a type-alias to refer to the `OutEvent` makes the migration much easier.
Previously, inbound connections that happened to resolve to our own `PeerId` were reported as `WrongPeerId`. With this patch, we now report those in a dedicated `LocalPeerId` error.
Related: #3205.
Instead of offering a public constructor, users are now no longer able to construct `ConnectionId`s at all. They only public API exposed are the derived traits. Internally, `ConnectionId`s are monotonically incremented using a static atomic counter, thus no two connections will ever get assigned the same ID.
The trick with this one is to use `futures::Either` everywhere where we may wrap something that implements any of the `futures` traits. This includes the output of `EitherFuture` itself. We also need to implement `StreamMuxer` on `future::Either` because `StreamMuxer`s may be the the `Output` of `InboundUpgrade`.
Instead of tracking an inner enum, move all fields of `Opts` into `DialOpts`, setting them directly once we construct them. This makes the getters a lot simpler to implement and reduces code duplication.
Currently, we only have a single channel for all established connections. This requires us to construct the channel ahead of time, before we even have a connection. As it turns out, sharing this buffer across all connections actually has downsides. In particular, this means a single, very busy connection can starve others by filling up this buffer, forcing other connections to wait until they can emit an event.
