* Update soketto and enable deflate extension.
* libp2p-deflate and libp2p-websocket share flate2.
Due to the way feature resolution works in cargo today, the `deflate`
feature of `soketto` will include `flate2` with feature `zlib` which is
then also active for the `flate2` that `libp2p-deflate` depends on. This
leads to compilation failures for WASM targets. This PR therefore moves
libp2p-deflate to the crates which are not available on WASM.
* initial implementation of the records
* move to multihash keys
* correctly process query results
* comments and formatting
* correctly return closer_peers in query
* checking wrong peer id in test
* Apply suggestions from code review
Co-Authored-By: Roman Borschel <romanb@users.noreply.github.com>
* Fix changes from suggestions
* Send responses to PUT_VALUE requests
* Shortcut in get_value
* Update protocols/kad/src/behaviour.rs
Co-Authored-By: Roman Borschel <romanb@users.noreply.github.com>
* Revert "Update protocols/kad/src/behaviour.rs"
This reverts commit 579ce742a7f4c94587f1e1f0866d2a3a37418efb.
* Remove duplicate insertion
* Adds a record to a PUT_VALUE response
* Fix a racy put_value test
* Store value ourselves only if we are in K closest
* Abstract over storage
* Revert "Abstract over storage": bad take
This reverts commit eaebf5b6d915712eaf3b05929577fdf697f204d8.
* Abstract over records storage using hashmap as default
* Constructor for custom records
* New Record type and its traits
* Fix outdated storage name
* Fixes returning an event
* Change FindNodeReq key type to Multihash
* WriteState for a second stage of a PUT_VALUE request
* GET_VALUE should not have a record
* Refactor a match arm
* Add successes and failures counters to PutValueRes
* If value is found no need to return closer peers
* Remove a custo storage from tests
* Rename a test to get_value_not_found
* Adds a TODO to change FindNode request key to Multihash
Co-Authored-By: Roman Borschel <romanb@users.noreply.github.com>
* Move MemoryRecordStorage to record.rs
* Return a Cow-ed Record from get
* Fix incorrect GET_VALUE parsing
* Various fixes with review
* Fixes get_value_not_found
* Fix peerids names in test
* another fix
* PutValue correctly distributes values
* Simplify the test
* Check that results are actually the closest
* Reverts changes to tests
* Fix the test topology and checking the results
* Run put_value test ten times
* Adds a get_value test
* Apply suggestions from code review
Co-Authored-By: Roman Borschel <romanb@users.noreply.github.com>
* Make Record fields public
* Moves WriteState to write.rs
* A couple of minor fixes
* Another few fixes of review
* Simplify the put_value test
* Dont synchronously return an error from put_value
* Formatting fixes and comments
* Collect a bunch of results
* Take exactly as much elements as neede
* Check if the peer is still connected
* Adds a multiple GetValueResults results number test
* Unnecessary mut iterators in put_value
* Ask for num_results in get_value
* Dont allocate twice in get_value
* Dont count same errored peer multiple times
* Apply suggestions from code review
Co-Authored-By: Roman Borschel <romanb@users.noreply.github.com>
* Fix another review
* Apply suggestions from code review
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Bring back FromIterator and improve a panic message
* Update protocols/kad/src/behaviour.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Begin reimplementing the websocket transport.
* Add TLS support.
* Add support for redirects during handshake.
* Cosmetics.
* Remove unused error cases in tls module.
Left-overs from a previous implementation.
* No libp2p-websocket for wasm targets.
* Change tls::Config to make the server optional.
* Update transports/websocket/src/lib.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Duplicate config methods.
As per PR review feedback.
* Some improvements to the docs of NetworkBehaviour
* Apply suggestions from code review
Co-Authored-By: Roman Borschel <romanb@users.noreply.github.com>
* Map all 127.0.0.0/8 addresses to 127.0.0.1.
Since every local socket address in the 127.0.0.0/8 space is looped back
to 127.0.0.1/32 we should only have to report the later as the listen
address. For other addresses we still attempt to discover host addresses
when we encounter an unknown local address. We now also check that after
the host addresses have been reset that the address is now found,
otherwise we produce an error.
* Change listen address lookup.
Perform multiple steps:
1. Check for exact address match.
2. Else consider netmask and check for containment.
3. Else re-check host addresses and try 1 & 2 again.
4. Else report an error.
* Small fixes.
* Test and improve prefix_len.
* Simplify and inline the prefix_len logic.
* Fix status updates in KBuckets.
`KBucket::update` does currently not correctly update the `first_connected_pos`
before reinserting the node. This may result in connected nodes being considered
disconnected and thus eligible for replacement by a pending node if the bucket is
full and a new connected node is added.
Tests have been added for checking that `KBucket::update` preserves the status
and ordering of all other nodes in the bucket.
* Small test improvement.
Set an expectation for the new position, instead of taking the assigned position.
* Kademlia: Optimise iteration over closest entries.
The current implementation for finding the entries whose keys are closest
to some target key in the Kademlia routing table involves copying the
keys of all buckets into a new `Vec` which is then sorted based on the
distances to the target and turned into an iterator from which only a
small number of elements (by default 20) are drawn.
This commit introduces an iterator over buckets for finding the closest
keys to a target that visits the buckets in the optimal order, based on
the information contained in the distance bit-string representing the
distance between the local key and the target.
Correctness is tested against full-table scans.
Also included:
* Updated documentation.
* The `Entry` API was moved to the `kbucket::entry` sub-module for
ease of maintenance.
* The pending node handling has been slightly refactored in order to
bring code and documentation in agreement and clarify the semantics
a little.
* Rewrite pending node handling and add tests.
There are two issues with the current definition and use of Kademlia's
XOR metric:
1. The distance is currently equated with the bucket index, i.e.
`distance(a,b) - 1` is the index of the bucket into which either
peer is put by the other. The result is a metric that is not
unidirectional, as defined in the Kademlia paper and as implemented
in e.g. libp2p-go and libp2p-js, which is to interpret the result
of the XOR as an integer in its entirety.
2. The current `KBucketsPeerId` trait and its instances allow computing
distances between types with differing bit lengths as well as between
types that hash all inputs again (i.e. `KadHash`) and "plain" `PeerId`s
or `Multihash`es. This can result in computed distances that are either
incorrect as per the requirement of the libp2p specs that all distances
are to be computed from the XOR of the SHA256 of the input keys, or
even fall outside of the image of the metric used for the `KBucketsTable`.
In the latter case, such distances are not currently used as a bucket index
- they can only occur in the context of comparing distances for the purpose
of sorting peers - but that still seems undesirable.
These issues are addressed here as follows:
* Unidirectionality of the XOR metric is restored by keeping the "full"
integer representation of the bitwise XOR. The result is an XOR metric
as defined in the paper. This also opens the door to avoiding the
"full table scan" when searching for the keys closest to a given key -
the ideal order in which to visit the buckets can be computed with the
help of the distance bit string.
* As a simplification and to make it easy to "do the right thing", the
XOR metric is only defined on an opaque `kbucket::Key` type, partially
derived from the current `KadHash`. `KadHash` and `KBucketsPeerId`
are removed.
* Replace `secp256k1` crate with `libsecp256k1`.
Unfortunately we could not implement `AsRef<[u8]>` for `SecretKey`
as the crate does not provide a means to do so.
* Fix `DecodingError` invocation.
* Remove the cc for wasm
* Revert "Remove the cc for wasm"
This reverts commit 3a19db35e62931c6e9ffbff6c21f9b0d7ae5403a.
* Fix CircleCI build
* Add parity_multiaddr::from_websockets_url
* Make from_websockets_url more genreic
* Oops, forgot the file
* Use the URL crate
* Add dns_and_port test
* Address review
* Add support for unix
