Now that we have the infrastructure for notifying protocols about changes to our listen protocols, we can use this to actively push those changes to our remotes. This allows other peers to re-configure themselves with very low-latency instead of waiting for the periodic identify event.
Resolves: #3613.
Pull-Request: #3980.
Previously, the associated types on `NetworkBehaviour` and `ConnectionHandler` carried generic names like `InEvent` and `OutEvent`. These names are _correct_ in that `OutEvent`s are passed out and `InEvent`s are passed in but they don't help users understand how these types are used.
In theory, a `ConnectionHandler` could be used separately from `NetworkBehaviour`s but that is highly unlikely. Thus, we rename these associated types to indicate, where the message is going to be sent to:
- `NetworkBehaviour::OutEvent` is renamed to `ToSwarm`: It describes the message(s) a `NetworkBehaviour` can emit to the `Swarm`. The user is going to receive those in `SwarmEvent::Behaviour`.
- `ConnectionHandler::InEvent` is renamed to `FromBehaviour`: It describes the message(s) a `ConnectionHandler` can receive from its behaviour via `ConnectionHandler::on_swarm_event`. The `NetworkBehaviour` can send it via the `ToSwarm::NotifyHandler` command.
- `ConnectionHandler::OutEvent` is renamed to `ToBehaviour`: It describes the message(s) a `ConnectionHandler` can send back to the behaviour via the now also renamed `ConnectionHandlerEvent::NotifyBehaviour` (previously `ConnectionHandlerEvent::Custom`)
Resolves: #2854.
Pull-Request: #3848.
A `ConnectionHandler` is bound to a single peer. There is no need to embed the `PeerId` in the event that we report to the behaviour, it already knows which peer the event relates to.
Pull-Request: #3895.
With this patch, implementations of `ConnectionHandler` (which are typically composed in a tree) can exchange information about the supported protocols of a remote with each other via `ConnectionHandlerEvent::ReportRemoteProtocols`. The provided `ProtocolSupport` enum can describe either additions or removals of the remote peer's protocols.
This information is aggregated in the connection and passed down to the `ConnectionHandler` via `ConnectionEvent::RemoteProtocolsChange`.
Similarly, if the listen protocols of a connection change, all `ConnectionHandler`s on the connection will be notified via `ConnectionEvent::LocalProtocolsChange`. This will allow us to eventually remove `PollParameters` from `NetworkBehaviour`.
This pattern allows protocols on a connection to communicate with each other. For example, protocols like identify can share the list of (supposedly) supported protocols by the remote with all other handlers. A protocol like kademlia can accurately add and remove a remote from its routing table as a result.
Resolves: #2680.
Related: #3124.
Pull-Request: #3651.
Currently, the `connection_keep_alive` function of identify does not compute anything but its return value is set through the handler state machine. This is hard to understand and causes surprising behaviour because at the moment, we set `KeepAlive::No` as soon as the remote has answered our identify request. Depending on what else is happening on the connection, this might close the connection before we have successfully answered the remote's identify request.
To fix this, we now compute `connection_keep_alive` based on whether we are still using the connection.
Related: #3844.
Pull-Request: #3876.
The currently provided `ConnectionHandlerUpgrErr` is very hard to use. Not only does it have a long name, it also features 3 levels of nesting which results in a lot of boilerplate. Last but not least, it exposes `multistream-select` as a dependency to all protocols.
We fix all of the above by renaming the type to `StreamUpgradeError` and flattening out its interface. Unrecoverable errors during protocol selection are hidden within the `Io` variant.
Related: #3759.
Pull-Request: #3882.
This patch refactors the identify tests to use `libp2p-swarm-test`. This allows us to delete quite a bit of code and makes several dev-dependencies obsolete.
The `correct_transfer` test is made obsolete by more precise assertions in the `periodic_identify` test. This allows us to remove the dependency on the `upgrade::{apply_inbound,apply_outbound}` functions.
Finally, we also fix a bug where the reported listen addresses to the other node could contain duplicates.
Related: #3748.
Pull-Request: #3851.
Previously, a protocol could be any sequence of bytes as long as it started with `/`. Now, we directly parse a protocol as `String` which enforces it to be valid UTF8.
To notify users of this change, we delete the `ProtocolName` trait. The new requirement is that users need to provide a type that implements `AsRef<str>`.
We also add a `StreamProtocol` newtype in `libp2p-swarm` which provides an easy way for users to ensure their protocol strings are compliant. The newtype enforces that protocol strings start with `/`. `StreamProtocol` also implements `AsRef<str>`, meaning users can directly use it in their upgrades.
`multistream-select` by itself only changes marginally with this patch. The only thing we enforce in the type-system is that protocols must implement `AsRef<str>`.
Resolves: #2831.
Pull-Request: #3746.
Previously, a `ConnectionHandler` was immediately requested from the `NetworkBehaviour` as soon as a new dial was initiated or a new incoming connection accepted.
With this patch, we delay the creation of the handler until the connection is actually established and fully upgraded, i.e authenticated and multiplexed.
As a consequence, `NetworkBehaviour::new_handler` is now deprecated in favor of a new set of callbacks:
- `NetworkBehaviour::handle_pending_inbound_connection`
- `NetworkBehaviour::handle_pending_outbound_connection`
- `NetworkBehaviour::handle_established_inbound_connection`
- `NetworkBehaviour::handle_established_outbound_connection`
All callbacks are fallible, allowing the `NetworkBehaviour` to abort the connection either immediately or after it is fully established. All callbacks also receive a `ConnectionId` parameter which uniquely identifies the connection. For example, in case a `NetworkBehaviour` issues a dial via `NetworkBehaviourAction::Dial`, it can unambiguously detect this dial in these lifecycle callbacks via the `ConnectionId`.
Finally, `NetworkBehaviour::handle_pending_outbound_connection` also replaces `NetworkBehaviour::addresses_of_peer` by allowing the behaviour to return more addresses to be used for the dial.
Resolves#2824.
Pull-Request: #3254.
The trick with this one is to use `futures::Either` everywhere where we may wrap something that implements any of the `futures` traits. This includes the output of `EitherFuture` itself. We also need to implement `StreamMuxer` on `future::Either` because `StreamMuxer`s may be the the `Output` of `InboundUpgrade`.
Previously, we had one callback for each kind of message that a `ConnectionHandler` would receive from either its `NetworkBehaviour` or the connection itself.
With this patch, we combine these functions, resulting in two callbacks:
- `on_behaviour_event`
- `on_connection_event`
Resolves#3080.
An identify push contains the whole identify information of a remote
peer. Upgrading multiple inbound identify push streams is useless.
Instead older streams are dropped in favor of newer streams.
A `ProtocolsHandler`, now `ConnectionHandler`, handels a connection, not
a protocol. Thus the name `CONNECTIONHandler` is more appropriate.
Next to the rename of `ProtocolsHandler` this commit renames the `mod
protocols_handler` to `mod handler`. Finally all combinators (e.g.
`ProtocolsHandlerSelect`) are renamed appropriately.
Changes needed to get libp2p to run via `wasm32-unknown-unknown` in the browser
(both main thread and inside web workers).
Replaces wasm-timer with futures-timer and instant.
Co-authored-by: Oliver Wangler <oliver@wngr.de>
* Fix needless question mark operator
* Don't convert from u64 to u64
LocalStreamId is already a u64, no need to convert.
* Don't use `.into()` to convert to the same type
* Don't specify lifetime if it can be inferred
* Use `vec!` macro if we immediately push to it
This creates the vector with the appropriate capacity.
* Don't index array when taking a reference is enough
Co-authored-by: Max Inden <mail@max-inden.de>
* Implement /ipfs/id/push/1.0.0 alongside some refactoring.
* Implement /ipfs/id/push/1.0.0, i.e. the ability to actively
push information of the local peer to specific remotes.
* Make the initial delay as well as the recurring delay
for the periodic identification requests configurable,
introducing `IdentifyConfig`.
* Fix test.
* Fix example.
* Update protocols/identify/src/identify.rs
Co-authored-by: Max Inden <mail@max-inden.de>
* Update protocols/identify/src/identify.rs
Co-authored-by: Max Inden <mail@max-inden.de>
* Update versions and changelogs.
Co-authored-by: Max Inden <mail@max-inden.de>
* Simplify trait bounds requirements
* More work
* Moar
* Finish
* Fix final tests
* More simplification
* Use separate traits for Inbound/Outbound
* Update gossipsub and remove warnings
* Add documentation to swarm
* Remove BoxSubstream
* Fix tests not compiling
* Fix stack overflow
* Address concerns
* For some reason my IDE ignored libp2p-kad
* Implement Debug for (ed25519|secp256k1)::(Keypair|SecretKey) (#1285)
* Fix possible arithmetic overflow in libp2p-kad. (#1291)
When the number of active queries exceeds the (internal)
JOBS_MAX_QUERIES limit, which is only supposed to bound
the number of concurrent queries relating to background
jobs, an arithmetic overflow occurs. This is fixed by
using saturating subtraction.
* protocols/plaintext: Add example on how to upgrade with PlainTextConfig1 (#1286)
* [mdns] - Support for long mDNS names (Bug #1232) (#1287)
* Dead code -- commenting out with a note referencing future implementation
* Adding "std" feature so that cargo can build in other directories (notably `misc/mdns`, so that I could run these tests)
* Permitting `PeerID` to be built from an `Identity` multihash
* The length limit for DNS labels is 63 characters, as per RFC1035
* Allocates the vector with capacity for the service name plus additional QNAME encoding bytes
* Added support for encoding/decoding peer IDs with an encoded length greater than 63 characters
* Removing "std" from ring features
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Retaining MAX_INLINE_KEY_LENGTH with comment about future usage
* `segment_peer_id` consumes `peer_id` ... plus an early return for IDs that don't need to be segmented
* Fixing logic
* Bump most dependencies (#1268)
* Bump most dependencies
This actually builds 😊.
* Bump all dependencies
Includes the excellent work of @rschulman in #1265.
* Remove use of ed25519-dalek fork
* Monomorphize more dependencies
* Add compatibility hack for rand
Cargo allows a crate to depend on multiple versions of another, but
`cargo-web` panics in that situation. Use a wrapper crate to work
around the panic.
* Use @tomaka’s idea for using a newer `rand`
instead of my own ugly hack.
* Switch to Parity master
as its dependency-bumping PR has been merged.
* Update some depenendencies again
* Remove unwraps and `#[allow(deprecated)]`.
* Remove spurious changes to dependencies
Bumping minor or patch versions is not needed, and increases likelyhood
of merge conflicts.
* Remove some redundant Cargo.toml changes
* Replace a retry loop with an expect
`ed25519::SecretKey::from_bytes` will never fail for 32-byte inputs.
* Revert changes that don’t belong in this PR
* Remove using void to bypass ICE (#1295)
* Publish 0.13.0 (#1294)
* Refactor the Identify protocol.
Thereby updating the documentation. The low-level protocol
and handler modules are no longer exposed and some constructors
of the IdentifyEvent renamed.
* Update protocols/identify/src/protocol.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
