Allows `NetworkBehaviour` implementations to dial a peer, but instruct
the dialed connection to be upgraded as if it were the listening
endpoint.
This is needed when establishing direct connections through NATs and/or
Firewalls (hole punching). When hole punching via TCP (QUIC is different
but similar) both ends dial the other at the same time resulting in a
simultaneously opened TCP connection. To disambiguate who is the dialer
and who the listener there are two options:
1. Use the Simultaneous Open Extension of Multistream Select. See
[sim-open] specification and [sim-open-rust] Rust implementation.
2. Disambiguate the role (dialer or listener) based on the role within
the DCUtR [dcutr] protocol. More specifically the node initiating the
DCUtR process will act as a listener and the other as a dialer.
This commit enables (2), i.e. enables the DCUtR protocol to specify the
role used once the connection is established.
While on the positive side (2) requires one round trip less than (1), on
the negative side (2) only works for coordinated simultaneous dials.
I.e. when a simultaneous dial happens by chance, and not coordinated via
DCUtR, the connection attempt fails when only (2) is in place.
[sim-open]: https://github.com/libp2p/specs/blob/master/connections/simopen.md
[sim-open-rust]: https://github.com/libp2p/rust-libp2p/pull/2066
[dcutr]: https://github.com/libp2p/specs/blob/master/relay/DCUtR.md
Add convenience function `is_relayed` to `ConnectedPoint`, determining
whether a connection is relayed based on whether it contains a
`Protocol::P2pCircuit`.
Concurrently dial address candidates within a single dial attempt.
Main motivation for this feature is to increase success rate on hole punching
(see https://github.com/libp2p/rust-libp2p/issues/1896#issuecomment-885894496
for details). Though, as a nice side effect, as one would expect, it does
improve connection establishment time.
Cleanups and fixes done along the way:
- Merge `pool.rs` and `manager.rs`.
- Instead of manually implementing state machines in `task.rs` use
`async/await`.
- Fix bug where `NetworkBehaviour::inject_connection_closed` is called without a
previous `NetworkBehaviour::inject_connection_established` (see
https://github.com/libp2p/rust-libp2p/issues/2242).
- Return handler to behaviour on incoming connection limit error. Missed in
https://github.com/libp2p/rust-libp2p/issues/2242.
Require `NetworkBehaviourAction::{DialPeer,DialAddress}` to contain a
`ProtocolsHandler`. This allows a behaviour to attach custom state to its
handler. The behaviour would no longer need to track this state separately
during connection establishment, thus reducing state required in a behaviour.
E.g. in the case of `libp2p-kad` the behaviour can include a `GetRecord` request
in its handler, or e.g. in the case of `libp2p-request-response` the behaviour
can include the first request in the handler.
Return `ProtocolsHandler` on connection error and close. This allows a behaviour
to extract its custom state previously included in the handler on connection
failure and connection closing. E.g. in the case of `libp2p-kad` the behaviour
could extract the attached `GetRecord` from the handler of the failed connection
and then start another connection attempt with a new handler with the same
`GetRecord` or bubble up an error to the user.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
* Refactor and extend configurable connection limits.
To better track different connection counts, permit configurable
limits for these counts and make these available for
inspection efficiently, introduce dedicated connection counters
via a `ConnectionCounters` structure that is exposed on the
API via the `NetworkInfo`. All connection or connection
states that are counted in this way can also have effective
configurable limits.
* Cleanup
* Add missing file.
* Refine naming and config API.
* Update core/CHANGELOG.md
Co-authored-by: Max Inden <mail@max-inden.de>
* Update core/CHANGELOG.md
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Max Inden <mail@max-inden.de>
With 826f513 a `StreamMuxer` can notify that the address of a remote
peer changed. This is needed to support the transport protocol QUIC as
remotes can change their IP addresses within the lifetime of a single
connection.
This commit implements the `NetworkBehaviour::inject_address_change`
handler to update the Kademlia routing table accordingly.
* Allow StreamMuxer to notify changes in the address
* Fix doc link
* Revert accidental rename
* Other accidental rename
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
* [libp2p-swarm] Make the multiple connections per peer first-class.
This commit makes the notion of multiple connections per peer
first-class in the API of libp2p-swarm, introducing the new
callbacks `inject_connection_established` and
`inject_connection_closed`. The `endpoint` parameter from
`inject_connected` and `inject_disconnected` is removed,
since the first connection to open may not be the last
connection to close, i.e. it cannot be guaranteed,
as was previously the case, that the endpoints passed
to these callbacks match up.
* Have identify track all addresses.
So that identify requests can be answered with the correct
observed address of the connection on which the request
arrives.
* Cleanup
* Cleanup
* Improve the `Peer` state API.
* Remove connection ID from `SwarmEvent::Dialing`.
* Mark `DialPeerCondition` non-exhaustive.
* Re-encapsulate `NetworkConfig`.
To retain the possibility of not re-exposing all
network configuration choices, thereby providing
a more convenient API on the \`SwarmBuilder\`.
* Rework Swarm::dial API.
* Update CHANGELOG.
* Doc formatting tweaks.
* Allow multiple connections per peer in libp2p-core.
Instead of trying to enforce a single connection per peer,
which involves quite a bit of additional complexity e.g.
to prioritise simultaneously opened connections and can
have other undesirable consequences [1], we now
make multiple connections per peer a feature.
The gist of these changes is as follows:
The concept of a "node" with an implicit 1-1 correspondence
to a connection has been replaced with the "first-class"
concept of a "connection". The code from `src/nodes` has moved
(with varying degrees of modification) to `src/connection`.
A `HandledNode` has become a `Connection`, a `NodeHandler` a
`ConnectionHandler`, the `CollectionStream` was the basis for
the new `connection::Pool`, and so forth.
Conceptually, a `Network` contains a `connection::Pool` which
in turn internally employs the `connection::Manager` for
handling the background `connection::manager::Task`s, one
per connection, as before. These are all considered implementation
details. On the public API, `Peer`s are managed as before through
the `Network`, except now the API has changed with the shift of focus
to (potentially multiple) connections per peer. The `NetworkEvent`s have
accordingly also undergone changes.
The Swarm APIs remain largely unchanged, except for the fact that
`inject_replaced` is no longer called. It may now practically happen
that multiple `ProtocolsHandler`s are associated with a single
`NetworkBehaviour`, one per connection. If implementations of
`NetworkBehaviour` rely somehow on communicating with exactly
one `ProtocolsHandler`, this may cause issues, but it is unlikely.
[1]: https://github.com/paritytech/substrate/issues/4272
* Fix intra-rustdoc links.
* Update core/src/connection/pool.rs
Co-Authored-By: Max Inden <mail@max-inden.de>
* Address some review feedback and fix doc links.
* Allow responses to be sent on the same connection.
* Remove unnecessary remainders of inject_replaced.
* Update swarm/src/behaviour.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update swarm/src/lib.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update core/src/connection/manager.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update core/src/connection/manager.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update core/src/connection/pool.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Incorporate more review feedback.
* Move module declaration below imports.
* Update core/src/connection/manager.rs
Co-Authored-By: Toralf Wittner <tw@dtex.org>
* Update core/src/connection/manager.rs
Co-Authored-By: Toralf Wittner <tw@dtex.org>
* Simplify as per review.
* Fix rustoc link.
* Add try_notify_handler and simplify.
* Relocate DialingConnection and DialingAttempt.
For better visibility constraints.
* Small cleanup.
* Small cleanup. More robust EstablishedConnectionIter.
* Clarify semantics of `DialingPeer::connect`.
* Don't call inject_disconnected on InvalidPeerId.
To preserve the previous behavior and ensure calls to
`inject_disconnected` are always paired with calls to
`inject_connected`.
* Provide public ConnectionId constructor.
Mainly needed for testing purposes, e.g. in substrate.
* Move the established connection limit check to the right place.
* Clean up connection error handling.
Separate connection errors into those occuring during
connection setup or upon rejecting a newly established
connection (the `PendingConnectionError`) and those
errors occurring on previously established connections,
i.e. for which a `ConnectionEstablished` event has
been emitted by the connection pool earlier.
* Revert change in log level and clarify an invariant.
* Remove inject_replaced entirely.
* Allow notifying all connection handlers.
Thereby simplify by introducing a new enum `NotifyHandler`,
used with a single constructor `NetworkBehaviourAction::NotifyHandler`.
* Finishing touches.
Small API simplifications and code deduplication.
Some more useful debug logging.
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
Co-authored-by: Toralf Wittner <tw@dtex.org>
