* Emit events for active connection close and fix `disconnect()`.
The `Network` does currently not emit events for actively
closed connections, e.g. via `EstablishedConnection::close`
or `ConnectedPeer::disconnect()`. As a result, when actively
closing connections, there will be `ConnectionEstablished`
events emitted without eventually a matching `ConnectionClosed`
event. This seems undesirable and has the consequence that
the `Swarm::ban_peer_id` feature in `libp2p-swarm` does not
result in appropriate calls to `NetworkBehaviour::inject_connection_closed`
and `NetworkBehaviour::inject_disconnected`. Furthermore,
the `disconnect()` functionality in `libp2p-core` is currently
broken as it leaves the `Pool` in an inconsistent state.
This commit does the following:
1. When connection background tasks are dropped
(i.e. removed from the `Manager`), they
always terminate immediately, without attempting
an orderly close of the connection.
2. An orderly close is sent to the background task
of a connection as a regular command. The
background task emits a `Closed` event
before terminating.
3. `Pool::disconnect()` removes all connection
tasks for the affected peer from the `Manager`,
i.e. without an orderly close, thereby also
fixing the discovered state inconsistency
due to not removing the corresponding entries
in the `Pool` itself after removing them from
the `Manager`.
4. A new test is added to `libp2p-swarm` that
exercises the ban/unban functionality and
places assertions on the number and order
of calls to the `NetworkBehaviour`. In that
context some new testing utilities have
been added to `libp2p-swarm`.
This addresses https://github.com/libp2p/rust-libp2p/issues/1584.
* Update swarm/src/lib.rs
Co-authored-by: Toralf Wittner <tw@dtex.org>
* Incorporate some review feedback.
* Adapt to changes in master.
* More verbose panic messages.
* Simplify
There is no need for a `StartClose` future.
* Fix doc links.
* Further small cleanup.
* Update CHANGELOGs and versions.
Co-authored-by: Toralf Wittner <tw@dtex.org>
* Support spec-compliant reading of noise handshake payloads.
See https://github.com/libp2p/rust-libp2p/issues/1631.
This the first of a three-step process to addressing the issue.
In this step, support for reading noise handshake payloads
without an additional length prefix is added, falling back
to attempting a decoding with length prefix on failure.
Length prefixes are still sent in this step. Hence
interoperability with other libp2p implementations is not
yet achieved after with step.
To achieve a better separation of handshake and transport
I/O, the `NoiseFramed` type has been extracted from
`NoiseOutput`. `NoiseFramed` is a `Sink` and `Stream`
of length-delimited Noise protocol messages. This type
is used in the handshake phase. Once a handshake
completes the underlying Noise session transitions to
transport mode and the `NoiseFramed` is wrapped in
the `NoiseOutput` which provides a regular `AsyncRead`
/ `AsyncWrite` I/O resource on top of the framed
encoding. No new buffers are introduced, they are
just split between `NoiseFramed` and `NoiseOutput`.
The second step involves removing the sending of the
length prefix in a subsequent release.
The third step involves removing the support for reading
length-prefixed protobuf payloads.
* Small cleanup.
* Reuse frame decryption buffer.
Since frames are consumed one-by-one, `NoiseFramed` can have
a `BytesMut` decryption buffer, handing out immutable `Bytes`
views for each decrypted message. Since each view gets fully
consumed and dropped before the next frame is read, the
`BytesMut` decryption buffer in `NoiseFramed` can always
reuse the same buffer, only growing it as necessary.
* Simplify.
* Add missing inner poll_flush().
* Improve nested length detection.
* Avoid unnecessary clearing of send buffers.
Thus reducing the necessary zeroing of send buffers on resize,
as per the previous behaviour.
* Prepare release.
* Allow multiple connections per peer in libp2p-core.
Instead of trying to enforce a single connection per peer,
which involves quite a bit of additional complexity e.g.
to prioritise simultaneously opened connections and can
have other undesirable consequences [1], we now
make multiple connections per peer a feature.
The gist of these changes is as follows:
The concept of a "node" with an implicit 1-1 correspondence
to a connection has been replaced with the "first-class"
concept of a "connection". The code from `src/nodes` has moved
(with varying degrees of modification) to `src/connection`.
A `HandledNode` has become a `Connection`, a `NodeHandler` a
`ConnectionHandler`, the `CollectionStream` was the basis for
the new `connection::Pool`, and so forth.
Conceptually, a `Network` contains a `connection::Pool` which
in turn internally employs the `connection::Manager` for
handling the background `connection::manager::Task`s, one
per connection, as before. These are all considered implementation
details. On the public API, `Peer`s are managed as before through
the `Network`, except now the API has changed with the shift of focus
to (potentially multiple) connections per peer. The `NetworkEvent`s have
accordingly also undergone changes.
The Swarm APIs remain largely unchanged, except for the fact that
`inject_replaced` is no longer called. It may now practically happen
that multiple `ProtocolsHandler`s are associated with a single
`NetworkBehaviour`, one per connection. If implementations of
`NetworkBehaviour` rely somehow on communicating with exactly
one `ProtocolsHandler`, this may cause issues, but it is unlikely.
[1]: https://github.com/paritytech/substrate/issues/4272
* Fix intra-rustdoc links.
* Update core/src/connection/pool.rs
Co-Authored-By: Max Inden <mail@max-inden.de>
* Address some review feedback and fix doc links.
* Allow responses to be sent on the same connection.
* Remove unnecessary remainders of inject_replaced.
* Update swarm/src/behaviour.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update swarm/src/lib.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update core/src/connection/manager.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update core/src/connection/manager.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update core/src/connection/pool.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Incorporate more review feedback.
* Move module declaration below imports.
* Update core/src/connection/manager.rs
Co-Authored-By: Toralf Wittner <tw@dtex.org>
* Update core/src/connection/manager.rs
Co-Authored-By: Toralf Wittner <tw@dtex.org>
* Simplify as per review.
* Fix rustoc link.
* Add try_notify_handler and simplify.
* Relocate DialingConnection and DialingAttempt.
For better visibility constraints.
* Small cleanup.
* Small cleanup. More robust EstablishedConnectionIter.
* Clarify semantics of `DialingPeer::connect`.
* Don't call inject_disconnected on InvalidPeerId.
To preserve the previous behavior and ensure calls to
`inject_disconnected` are always paired with calls to
`inject_connected`.
* Provide public ConnectionId constructor.
Mainly needed for testing purposes, e.g. in substrate.
* Move the established connection limit check to the right place.
* Clean up connection error handling.
Separate connection errors into those occuring during
connection setup or upon rejecting a newly established
connection (the `PendingConnectionError`) and those
errors occurring on previously established connections,
i.e. for which a `ConnectionEstablished` event has
been emitted by the connection pool earlier.
* Revert change in log level and clarify an invariant.
* Remove inject_replaced entirely.
* Allow notifying all connection handlers.
Thereby simplify by introducing a new enum `NotifyHandler`,
used with a single constructor `NetworkBehaviourAction::NotifyHandler`.
* Finishing touches.
Small API simplifications and code deduplication.
Some more useful debug logging.
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
Co-authored-by: Toralf Wittner <tw@dtex.org>
* Grow noise buffers dynamically.
Currently we allocate a buffer of 176 KiB for each noise state, i.e.
each connection. For connections which see only small data frames
this is wasteful. At the same time we limit the max. write buffer size
to 16 KiB to keep the total buffer size relatively small, which
results in smaller encrypted messages and also makes it less likely to
ever encounter the max. noise package size of 64 KiB in practice when
communicating with other nodes using the same implementation.
This PR repaces the static buffer allocation with a dynamic one. We
only reserve a small space for the authentication tag plus some extra
reserve and are able to buffer larger data frames before encrypting.
* Grow write buffer from offset.
As suggested by @mxinden, this prevents increasing the write buffer up
to MAX_WRITE_BUF_LEN.
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* hmm...
* Switch snow resolver to default
* Fix documentation
* Use the sha2 crate for sha512 hashing
* Use ring on native
* Use different features on different targets
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Fix broken links in rustdoc
This fixes all of the rustdoc warnings on nightly.
* Check documentation intra-link
* Fix config
* Fix bad indent
* Make nightly explicit
* More links fixes
* Fix link broken after master merge
Co-authored-by: Demi Obenour <48690212+DemiMarie-parity@users.noreply.github.com>
The current implementation defines the InboundUpgrade only for `R = ()`
so notably a `NoiseConfig` created by `NoiseConfig::ik_dialer` can not
be an `InboundUpgrade`.
Fixes#1378.
* Implement Debug for (ed25519|secp256k1)::(Keypair|SecretKey) (#1285)
* Fix possible arithmetic overflow in libp2p-kad. (#1291)
When the number of active queries exceeds the (internal)
JOBS_MAX_QUERIES limit, which is only supposed to bound
the number of concurrent queries relating to background
jobs, an arithmetic overflow occurs. This is fixed by
using saturating subtraction.
* protocols/plaintext: Add example on how to upgrade with PlainTextConfig1 (#1286)
* [mdns] - Support for long mDNS names (Bug #1232) (#1287)
* Dead code -- commenting out with a note referencing future implementation
* Adding "std" feature so that cargo can build in other directories (notably `misc/mdns`, so that I could run these tests)
* Permitting `PeerID` to be built from an `Identity` multihash
* The length limit for DNS labels is 63 characters, as per RFC1035
* Allocates the vector with capacity for the service name plus additional QNAME encoding bytes
* Added support for encoding/decoding peer IDs with an encoded length greater than 63 characters
* Removing "std" from ring features
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Retaining MAX_INLINE_KEY_LENGTH with comment about future usage
* `segment_peer_id` consumes `peer_id` ... plus an early return for IDs that don't need to be segmented
* Fixing logic
* Bump most dependencies (#1268)
* Bump most dependencies
This actually builds 😊.
* Bump all dependencies
Includes the excellent work of @rschulman in #1265.
* Remove use of ed25519-dalek fork
* Monomorphize more dependencies
* Add compatibility hack for rand
Cargo allows a crate to depend on multiple versions of another, but
`cargo-web` panics in that situation. Use a wrapper crate to work
around the panic.
* Use @tomaka’s idea for using a newer `rand`
instead of my own ugly hack.
* Switch to Parity master
as its dependency-bumping PR has been merged.
* Update some depenendencies again
* Remove unwraps and `#[allow(deprecated)]`.
* Remove spurious changes to dependencies
Bumping minor or patch versions is not needed, and increases likelyhood
of merge conflicts.
* Remove some redundant Cargo.toml changes
* Replace a retry loop with an expect
`ed25519::SecretKey::from_bytes` will never fail for 32-byte inputs.
* Revert changes that don’t belong in this PR
* Remove using void to bypass ICE (#1295)
* Publish 0.13.0 (#1294)
