Disconnect pending connections with `Swarm::disconnect` and eport aborted
connections via `SwarmEvent::OutgoingConnectionError`.
Co-authored-by: Jack Maloney <git@jmmaloney4.xyz>
Co-authored-by: Marco Munizaga <git@marcopolo.io>
This commit removes the `Network` abstraction, thus managing `Listeners`
and the connection `Pool` in `Swarm` directly. This is done under the
assumption that noone uses the `Network` abstraction directly, but
instead everyone always uses it through `Swarm`. Both `Listeners` and
`Pool` are moved from `libp2p-core` into `libp2p-swarm`. Given that they
are no longer exposed via `Network`, they can be treated as an
implementation detail of `libp2p-swarm` and `Swarm`.
This change does not include any behavioural changes.
This change has the followin benefits:
- Removal of `NetworkEvent`, which was mostly an isomorphism of
`SwarmEvent`.
- Removal of the never-directly-used `Network` abstraction.
- Removal of now obsolete verbose `Peer` (`core/src/network/peer.rs`)
construct.
- Removal of `libp2p-core` `DialOpts`, which is a direct mapping of
`libp2p-swarm` `DialOpts`.
- Allowing breaking changes to the connection handling and `Swarm` API
interface without a breaking change in `libp2p-core` and thus a
without a breaking change in `/transport` protocols.
This change enables the following potential future changes:
- Removal of `NodeHandler` and `ConnectionHandler`. Thus allowing to
rename `ProtocolsHandler` into `ConnectionHandler`.
- Moving `NetworkBehaviour` and `ProtocolsHandler` into `libp2p-core`,
having `libp2p-xxx` protocol crates only depend on `libp2p-core` and
thus allowing general breaking changes to `Swarm` without breaking all
`libp2p-xxx` crates.
There are 3 ways to close a connection:
1. `ProtocolsHandlerEvent::Close`
2. `KeepAlive::No` via `ProtocolsHandler::connection_keep_alive`
3. `NetworkBehaviourAction::CloseConnection`
This commit references (2) as an alternative to (1) in the documentation
of (1).
Previously, the negotiated PeerId was included in the swarm event and
inject_dial_failure’s arguments while the expected one was absent. This
patch adds the negotiated PeerId to the DialError and includes the expected
one in the notifications.
Co-authored-by: Roland Kuhn <rk@rkuhn.info>
Allows `NetworkBehaviour` implementations to dial a peer, but instruct
the dialed connection to be upgraded as if it were the listening
endpoint.
This is needed when establishing direct connections through NATs and/or
Firewalls (hole punching). When hole punching via TCP (QUIC is different
but similar) both ends dial the other at the same time resulting in a
simultaneously opened TCP connection. To disambiguate who is the dialer
and who the listener there are two options:
1. Use the Simultaneous Open Extension of Multistream Select. See
[sim-open] specification and [sim-open-rust] Rust implementation.
2. Disambiguate the role (dialer or listener) based on the role within
the DCUtR [dcutr] protocol. More specifically the node initiating the
DCUtR process will act as a listener and the other as a dialer.
This commit enables (2), i.e. enables the DCUtR protocol to specify the
role used once the connection is established.
While on the positive side (2) requires one round trip less than (1), on
the negative side (2) only works for coordinated simultaneous dials.
I.e. when a simultaneous dial happens by chance, and not coordinated via
DCUtR, the connection attempt fails when only (2) is in place.
[sim-open]: https://github.com/libp2p/specs/blob/master/connections/simopen.md
[sim-open-rust]: https://github.com/libp2p/rust-libp2p/pull/2066
[dcutr]: https://github.com/libp2p/specs/blob/master/relay/DCUtR.md
Since https://github.com/libp2p/rust-libp2p/pull/2248 dial attempts are
no longer reported per address, but instead reported for all addresses
of a single dial at once.
This commit updates the comment accordingly.
Enable a `NetworkBehaviour` or a user via `Swarm::dial` to override the
dial concurrency factor per dial. This is especially relevant in the
case of libp2p-autonat where one wants to probe addresses in sequence to
reduce the amount of work a remote peer can force onto the local node.
To enable the above, this commit also:
- Introduces `libp2p_core::DialOpts` mirroring `libp2p_swarm::DialOpts`.
Passed as an argument to `Network::dial`.
- Removes `Peer::dial` in favor of `Network::dial`.
- Simplifies `Swarm::dial_with_handler`.
The introduction of `libp2p_core::DialOpts` will be useful beyond this
feature, e.g. for https://github.com/libp2p/rust-libp2p/pull/2363.
In the long run I would like to move and merge `libp2p_core::Network`
and `libp2p_core::Pool` into `libp2p_swarm::Swarm` thus deduplicating
`libp2p_core::DialOpts` and `libp2p_swarm::DialOpts`.
Fixes#2385.
Handling multiple interfaces in mdns. The socket logic was moved into an
instance while the mdns behaviour watches for interface changes and creates new
instances with a dedicated send/recv socket.
Co-authored-by: Max Inden <mail@max-inden.de>
Implement `NetworkBehaviour` on `either::Either<L, R>` where both L
and R both implement `NetworkBehaviour`.
Add NetworkBehaviour derive tests for Either and Toggle
Co-authored-by: Max Inden <mail@max-inden.de>
Don't report events of a connection to the `NetworkBehaviour`, if connection has
been established while the remote peer was banned. Among other guarantees this
upholds that `NetworkBehaviour::inject_event` is never called without a previous
`NetworkBehaviour::inject_connection_established` for said connection.
Co-authored-by: Max Inden <mail@max-inden.de>
Enable advanced dialing requests both on `Swarm` and via
`NetworkBehaviourAction`. Users can now trigger a dial with a specific
set of addresses, optionally extended via
`NetworkBehaviour::addresses_of_peer`. In addition the whole process is
now modelled in a type safe way via the builder pattern.
Example of a `NetworkBehaviour` requesting a dial to a specific peer
with a set of addresses additionally extended through
`NetworkBehaviour::addresses_of_peer`:
```rust
NetworkBehaviourAction::Dial {
opts: DialOpts::peer_id(peer_id)
.condition(PeerCondition::Always)
.addresses(addresses)
.extend_addresses_through_behaviour()
.build(),
handler,
}
```
Example of a user requesting a dial to an unknown peer with a single
address via `Swarm`:
```rust
swarm1.dial(
DialOpts::unknown_peer_id()
.address(addr2.clone())
.build()
)
```
Changes needed to get libp2p to run via `wasm32-unknown-unknown` in the browser
(both main thread and inside web workers).
Replaces wasm-timer with futures-timer and instant.
Co-authored-by: Oliver Wangler <oliver@wngr.de>
With https://github.com/libp2p/rust-libp2p/pull/2248 a connection task
`await`s sending an event to the behaviour before polling for new events
from the behaviour [1].
When `Swarm::poll` is unable to deliver an event to a connection task it
returns `Poll::Pending` even though (a) polling `Swarm::network` might be
able to make progress (`network_not_ready` being `false`) and (b) it
does not register a waker to be woken up [2].
In combination this can lead to a deadlock where a connection task waits
to send an event to the behaviour and `Swarm::poll` returns
`Poll::Pending` failing to send an event to the connection task, not
registering a waiker in order to be polled again.
With this commit `Swarm::poll` will only return `Poll::Pending`, when
failing to deliver an event to a connection task, if the network is
unable to make progress (i.e. `network_not_ready` being `true`).
In the long-run `Swarm::poll` should likely be redesigned, prioritizing
the behaviour over the network, given the former is the control plane
and the latter potentially yields new work from the outside.
[1]: ca1b7cf043/core/src/connection/pool/task.rs (L224-L232)
[2]: ca1b7cf043/swarm/src/lib.rs (L756-L783)
Concurrently dial address candidates within a single dial attempt.
Main motivation for this feature is to increase success rate on hole punching
(see https://github.com/libp2p/rust-libp2p/issues/1896#issuecomment-885894496
for details). Though, as a nice side effect, as one would expect, it does
improve connection establishment time.
Cleanups and fixes done along the way:
- Merge `pool.rs` and `manager.rs`.
- Instead of manually implementing state machines in `task.rs` use
`async/await`.
- Fix bug where `NetworkBehaviour::inject_connection_closed` is called without a
previous `NetworkBehaviour::inject_connection_established` (see
https://github.com/libp2p/rust-libp2p/issues/2242).
- Return handler to behaviour on incoming connection limit error. Missed in
https://github.com/libp2p/rust-libp2p/issues/2242.
Create a `ListenersEvent::Closed` when a listener is removed via
`Swarm::remove_listener`. This makes it more consistent with `Swarm::listen_on`,
and also informs the Swarm about the associated expired addresses.
Co-authored-by: Max Inden <mail@max-inden.de>
Require `NetworkBehaviourAction::{DialPeer,DialAddress}` to contain a
`ProtocolsHandler`. This allows a behaviour to attach custom state to its
handler. The behaviour would no longer need to track this state separately
during connection establishment, thus reducing state required in a behaviour.
E.g. in the case of `libp2p-kad` the behaviour can include a `GetRecord` request
in its handler, or e.g. in the case of `libp2p-request-response` the behaviour
can include the first request in the handler.
Return `ProtocolsHandler` on connection error and close. This allows a behaviour
to extract its custom state previously included in the handler on connection
failure and connection closing. E.g. in the case of `libp2p-kad` the behaviour
could extract the attached `GetRecord` from the handler of the failed connection
and then start another connection attempt with a new handler with the same
`GetRecord` or bubble up an error to the user.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Implement ProtocolsHandler on either::Either representing either of two
ProtocolsHandler implementations.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
- Removes the `Swarm` type alias, renaming `ExpandedSwarm` to `Swarm`.
- Remove `TInEvent`, `TOutEvent` and `THandler` trait parameters on
`Swarm`, instead deriving them through `TBehaviour`. Move derive logic
to separate type aliases.
- Simplify trait bounds on `Swarm` main `impl` and `Stream` `impl`.
With 45f07bf8639fd9056e4ffe52298ca113a0308951 `Network::dial` accepts a
`Multiaddr` with a `PeerId`. With that in mind the doc comment on
`NetworkBehaviourAction::DialAddress` is outdated.
Don't close connection if ping protocol is unsupported by remote. Previously, a
failed protocol negotation for ping caused a force close of the connection. As a
result, all nodes in a network had to support ping. To allow networks where some
nodes don't support ping, we now emit `PingFailure::Unsupported` once for every
connection on which ping is not supported.
Co-authored-by: Max Inden <mail@max-inden.de>
Not all implementations of `NetworkBehaviour` need all callbacks.
We've have been adding new callbacks with default implementations
for a while now. There is no reason the initial ones cannot also
be defaulted, thus making it easier create new implementations.
Co-authored-by: Max Inden <mail@max-inden.de>
- Change `PublicKey::into_protobuf_encoding` to
`PublicKey::to_protobuf_encoding`.
- Change `PublicKey::into_peer_id` to `PublicKey::to_peer_id`.
- Change `PeerId::from_public_key(PublicKey)` to
`PeerId::from_public_key(&PublicKey)`.
- Add `From<&PublicKey> for PeerId`.
Co-authored-by: Max Inden <mail@max-inden.de>
Add `ExpandedSwarm::disconnect_peer_id` and
`NetworkBehaviourAction::CloseConnection` to close connections to a specific
peer via an `ExpandedSwarm` or `NetworkBehaviour`.
Co-authored-by: Max Inden <mail@max-inden.de>
Change `Stream` implementation of `ExpandedSwarm` to return all
`SwarmEvents` instead of only the `NetworkBehaviour`'s events.
Remove `ExpandedSwarm::next_event`. Users can use `<ExpandedSwarm as
StreamExt>::next` instead.
Remove `ExpandedSwarm::next`. Users can use `<ExpandedSwarm as
StreamExt>::filter_map` instead.
Remove `Deref` and `DerefMut` implementations previously dereferencing
to the `NetworkBehaviour` on `Swarm`. Instead one can access the
`NetworkBehaviour` via `Swarm::behaviour` and `Swarm::behaviour_mut`.
Methods on `Swarm` can now be accessed directly, e.g. via
`my_swarm.local_peer_id()`.
Reasoning: Accessing the `NetworkBehaviour` of a `Swarm` through `Deref`
and `DerefMut` instead of a method call is an unnecessary complication,
especially for newcomers. In addition, `Swarm` is not a smart-pointer
and should thus not make use of `Deref` and `DerefMut`, see documentation
from the standard library below.
> Deref should only be implemented for smart pointers to avoid
confusion.
https://doc.rust-lang.org/std/ops/trait.Deref.html
