Since https://github.com/libp2p/rust-libp2p/pull/3973, gossipsub now fully supports wasm targets. It functions properly when added as a dependency on its own. However, when trying to use it under libp2p by activating a feature, it's not possible and the compiler will raise an error like `unresolved import libp2p::gossipsub`. This pull request enables the use of gossipsub for wasm targets when it's activated as a feature of the libp2p dependency.
Pull-Request: #4217.
Previously, the `libp2p-ping` module came with a policy to close a connection after X failed pings. This is only one of many possible policies on how users would want to do connection management.
We remove this policy without a replacement. If users wish to restore this functionality, they can easily implement such policy themselves: The default value of `max_failures` was 1. To restore the previous functionality users can simply close the connection upon the first received ping error.
In this same patch, we also simplify the API of `ping::Event` by removing the layer of `ping::Success` and instead reporting the RTT to the peer directly.
Related: #3591.
Pull-Request: #3947.
Previously we would increase a counter / gauge / histogram on each received identify information. These metrics are missleading, as e.g. they depend on the identify interval and don't represent the set of currently connected peers.
With this commit, identify information is tracked for the currently connected peers only. Instead of an increase on each received identify information, metrics represent the status quo (Gauge).
Example:
```
\# HELP libp2p_libp2p_identify_remote_protocols Number of connected nodes supporting a specific protocol, with "unrecognized" for each peer supporting one or more unrecognized protocols...
\# TYPE libp2p_libp2p_identify_remote_protocols gauge
libp2p_libp2p_identify_remote_protocols_total{protocol="/ipfs/id/push/1.0.0"} 1
libp2p_libp2p_identify_remote_protocols_total{protocol="/ipfs/id/1.0.0"} 1
libp2p_libp2p_identify_remote_protocols_total{protocol="/ipfs/ping/1.0.0"} 1
libp2p_libp2p_identify_remote_protocols_total{protocol="unrecognized"} 1
\# HELP libp2p_libp2p_identify_remote_listen_addresses Number of connected nodes advertising a specific listen address...
\# TYPE libp2p_libp2p_identify_remote_listen_addresses gauge
libp2p_libp2p_identify_remote_listen_addresses_total{listen_address="/ip4/tcp"} 1
libp2p_libp2p_identify_remote_listen_addresses_total{listen_address="/ip4/udp/quic"} 1
\# HELP libp2p_libp2p_identify_local_observed_addresses Number of connected nodes observing the local node at a specific address...
\# TYPE libp2p_libp2p_identify_local_observed_addresses gauge
libp2p_libp2p_identify_local_observed_addresses_total{observed_address="/ip4/tcp"} 1
```
Pull-Request: #3325.
This patch removes the 3 out of 4 deprecated public modules. I've left `store` for now because we made some mistakes in declaring that. The items within `store` still need to be publicly visible but I haven't yet figured out a good way of exporting / naming them. Thus, I've left that to a follow-up PR.
Related: #3647.
Pull-Request: #3896.
Users are encouraged to use `libp2p::connection_limit::Behaviour` which is a one-to-one replacement for this functionality but built as a `NetworkBehaviour`.
Related: #3647.
Pull-Request: #3885.
When an inbound stream upgrade fails, there isn't a whole lot we can do about that in the handler. In fact, for several errors, we wouldn't even know which specific handler to target, for example, `NegotiationFailed`. Similiarly, in case of an IO error during the upgrade, we don't know which handler the stream was eventually meant to be for.
Pull-Request: #3605.
Previously, a protocol could be any sequence of bytes as long as it started with `/`. Now, we directly parse a protocol as `String` which enforces it to be valid UTF8.
To notify users of this change, we delete the `ProtocolName` trait. The new requirement is that users need to provide a type that implements `AsRef<str>`.
We also add a `StreamProtocol` newtype in `libp2p-swarm` which provides an easy way for users to ensure their protocol strings are compliant. The newtype enforces that protocol strings start with `/`. `StreamProtocol` also implements `AsRef<str>`, meaning users can directly use it in their upgrades.
`multistream-select` by itself only changes marginally with this patch. The only thing we enforce in the type-system is that protocols must implement `AsRef<str>`.
Resolves: #2831.
Pull-Request: #3746.
The `unreachable_pub` lint makes us aware of uses of `pub` that are not actually reachable from the crate root. This is considered good because it means reading a `pub` somewhere means it is actually public API. Some of our crates are quite large and keeping their entire API surface in your head is difficult.
We should strive for most items being `pub(crate)`. This lint helps us enforce that.
Pull-Request: #3735.
Currently, banning peers is a first-class feature of `Swarm`. With the new connection management capabilities of `NetworkBehaviour`, we can now implement allow and block lists as a separate module.
We introduce a new crate `libp2p-allow-block-list` and deprecate `Swarm::ban_peer_id` in favor of that.
Related #2824.
Pull-Request: #3590.
This patch deprecates the existing connection limits within `Swarm` and uses the new `NetworkBehaviour` APIs to implement it as a plugin instead.
Related #2824.
Pull-Request: #3386.
Previously, a `ConnectionHandler` was immediately requested from the `NetworkBehaviour` as soon as a new dial was initiated or a new incoming connection accepted.
With this patch, we delay the creation of the handler until the connection is actually established and fully upgraded, i.e authenticated and multiplexed.
As a consequence, `NetworkBehaviour::new_handler` is now deprecated in favor of a new set of callbacks:
- `NetworkBehaviour::handle_pending_inbound_connection`
- `NetworkBehaviour::handle_pending_outbound_connection`
- `NetworkBehaviour::handle_established_inbound_connection`
- `NetworkBehaviour::handle_established_outbound_connection`
All callbacks are fallible, allowing the `NetworkBehaviour` to abort the connection either immediately or after it is fully established. All callbacks also receive a `ConnectionId` parameter which uniquely identifies the connection. For example, in case a `NetworkBehaviour` issues a dial via `NetworkBehaviourAction::Dial`, it can unambiguously detect this dial in these lifecycle callbacks via the `ConnectionId`.
Finally, `NetworkBehaviour::handle_pending_outbound_connection` also replaces `NetworkBehaviour::addresses_of_peer` by allowing the behaviour to return more addresses to be used for the dial.
Resolves#2824.
Pull-Request: #3254.
In case an error happens for an outgoing connection, `Pool` reports an `OutgoingConnectionError`. This one is mapped to a `DialError` and reported via `SwarmEvent::OutgoingConnectionError` and `FromSwarm::DialFailure`.
For incoming connections, we didn't quite do the same thing. For one, `SwarmEvent::IncomingConnectionError` directly contained a `PendingInboundConnectionError`. Two, `FromSwarm::ListenFailure` did not include an error at all.
With this patch, we now introduce a `ListenError` enum which we use in `SwarmEvent::IncomingConnectionError` and we pass a reference to it along in `FromSwarm::ListenFailure`.
Previously, inbound connections that happened to resolve to our own `PeerId` were reported as `WrongPeerId`. With this patch, we now report those in a dedicated `LocalPeerId` error.
Related: #3205.
Ever since we moved `Pool` into `libp2p-swarm`, we always use it with the same `Transport`: `Boxed`. It is thus unnecessary for us to be overly generic over what kind of `Transport` we are using. This allows us to remove a few type parameters from the implementation which overall simplifies things.
This is technically a breaking change because I am removing a type parameter from two exported type aliases:
- `PendingInboundConnectionError`
- `PendingOutboundConnectionError`
Those have always only be used with `std::io::Error` in our API but it is still a breaking change.
Currently the `libp2p_swarm_connections_establishment_duration` metric has the following buckets:
```
// exponential_buckets(1e-3, 2., 10)
[0.001, 0.002, 0.004, 0.008, 0.016, 0.032, 0.064, 0.128, 0.256, 0.512]
```
It is unlikely that a connection is established in 1ms, even within a datacenter. It is very likely that libp2p connection establishment takes longer than 512ms over the internet.
This commit proposes the following buckets:
```
// exponential_buckets(0.01, 1.5, 20)
[0.01, 0.015, 0.0225, 0.03375, 0.050625, 0.0759375, 0.11390625, 0.170859375, 0.2562890625,
0.38443359375, 0.576650390625, 0.8649755859375, 1.29746337890625, 1.946195068359375,
2.9192926025390626, 4.378938903808594, 6.568408355712891, 9.852612533569337, 14.778918800354004,
22.168378200531006]
```
- Buckets start at 10ms.
- Reasonably high resolution in the sub-second area.
- Largest bucket at 22s, e.g. for a relayed connection.
- Unfortunately rather obscure numbers.
Previously, we would only track the metrics like the number of open connections. With this patch, we extend these metrics with a `protocols` label that contains a "protocol stack". A protocol stack is a multi-address with all variable parts removed. For example, `/ip4/127.0.0.1/tcp/1234` turns into `/ip4/tcp`.
Resolves https://github.com/libp2p/rust-libp2p/issues/2758.
* misc/metrics: Explicitly delegate event recording to each recorder
This allows delegating a single event to multiple `Recorder`s. That enables e.g. the
`identify::Metrics` `Recorder` to act both on `IdentifyEvent` and `SwarmEvent`. The latter enables
it to garbage collect per peer data on disconnects.
* protocols/dcutr: Expose PROTOCOL_NAME
* protocols/identify: Expose PROTOCOL_NAME and PUSH_PROTOCOL_NAME
* protocols/ping: Expose PROTOCOL_NAME
* protocols/relay: Expose HOP_PROTOCOL_NAME and STOP_PROTOCOL_NAME
* misc/metrics: Track # connected nodes supporting specific protocol
An example metric exposed with this patch:
```
libp2p_identify_protocols{protocol="/ipfs/ping/1.0.0"} 10
```
This implies that 10 of the currently connected nodes support the ping protocol.
Removed the custom interval implementation and removes support for
wasm32-unknown-unknown. See https://github.com/libp2p/rust-libp2p/issues/2497
for details.
Co-authored-by: Diva M <divma@protonmail.com>
Co-authored-by: Max Inden <mail@max-inden.de>
This commit removes the `Network` abstraction, thus managing `Listeners`
and the connection `Pool` in `Swarm` directly. This is done under the
assumption that noone uses the `Network` abstraction directly, but
instead everyone always uses it through `Swarm`. Both `Listeners` and
`Pool` are moved from `libp2p-core` into `libp2p-swarm`. Given that they
are no longer exposed via `Network`, they can be treated as an
implementation detail of `libp2p-swarm` and `Swarm`.
This change does not include any behavioural changes.
This change has the followin benefits:
- Removal of `NetworkEvent`, which was mostly an isomorphism of
`SwarmEvent`.
- Removal of the never-directly-used `Network` abstraction.
- Removal of now obsolete verbose `Peer` (`core/src/network/peer.rs`)
construct.
- Removal of `libp2p-core` `DialOpts`, which is a direct mapping of
`libp2p-swarm` `DialOpts`.
- Allowing breaking changes to the connection handling and `Swarm` API
interface without a breaking change in `libp2p-core` and thus a
without a breaking change in `/transport` protocols.
This change enables the following potential future changes:
- Removal of `NodeHandler` and `ConnectionHandler`. Thus allowing to
rename `ProtocolsHandler` into `ConnectionHandler`.
- Moving `NetworkBehaviour` and `ProtocolsHandler` into `libp2p-core`,
having `libp2p-xxx` protocol crates only depend on `libp2p-core` and
thus allowing general breaking changes to `Swarm` without breaking all
`libp2p-xxx` crates.
Previously, the negotiated PeerId was included in the swarm event and
inject_dial_failure’s arguments while the expected one was absent. This
patch adds the negotiated PeerId to the DialError and includes the expected
one in the notifications.
Co-authored-by: Roland Kuhn <rk@rkuhn.info>
This commit adds an implementation for the circuit relay v2 protocol to be used
as a relay server, i.e. it supports incoming HOP requests and outgoing STOP
requests and used as a relay clients, i.e. outgoing HOP requests and incoming
STOP requests.
The existing circuit relay v1 protocol implementation is moved to
protocols/relay/src/v1.
Co-authored-by: ronzigelman <ronzigelman@gmail.com>
Co-authored-by: Marco Munizaga <git@marcopolo.io>
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Co-authored-by: Elena Frank <57632201+elenaf9@users.noreply.github.com>
Rename `KademliaEvent::InboundRequestServed` to `KademliaEvent::InboundRequest` and move
`InboundPutRecordRequest` into `InboundRequest::PutRecord` and `InboundAddProviderRequest` into
`InboundRequest::AddProvider`.
Co-authored-by: supercmmetry <vishaals2000@gmail.com>
Concurrently dial address candidates within a single dial attempt.
Main motivation for this feature is to increase success rate on hole punching
(see https://github.com/libp2p/rust-libp2p/issues/1896#issuecomment-885894496
for details). Though, as a nice side effect, as one would expect, it does
improve connection establishment time.
Cleanups and fixes done along the way:
- Merge `pool.rs` and `manager.rs`.
- Instead of manually implementing state machines in `task.rs` use
`async/await`.
- Fix bug where `NetworkBehaviour::inject_connection_closed` is called without a
previous `NetworkBehaviour::inject_connection_established` (see
https://github.com/libp2p/rust-libp2p/issues/2242).
- Return handler to behaviour on incoming connection limit error. Missed in
https://github.com/libp2p/rust-libp2p/issues/2242.
