Don't report events of a connection to the `NetworkBehaviour`, if connection has
been established while the remote peer was banned. Among other guarantees this
upholds that `NetworkBehaviour::inject_event` is never called without a previous
`NetworkBehaviour::inject_connection_established` for said connection.
Co-authored-by: Max Inden <mail@max-inden.de>
Enable advanced dialing requests both on `Swarm` and via
`NetworkBehaviourAction`. Users can now trigger a dial with a specific
set of addresses, optionally extended via
`NetworkBehaviour::addresses_of_peer`. In addition the whole process is
now modelled in a type safe way via the builder pattern.
Example of a `NetworkBehaviour` requesting a dial to a specific peer
with a set of addresses additionally extended through
`NetworkBehaviour::addresses_of_peer`:
```rust
NetworkBehaviourAction::Dial {
opts: DialOpts::peer_id(peer_id)
.condition(PeerCondition::Always)
.addresses(addresses)
.extend_addresses_through_behaviour()
.build(),
handler,
}
```
Example of a user requesting a dial to an unknown peer with a single
address via `Swarm`:
```rust
swarm1.dial(
DialOpts::unknown_peer_id()
.address(addr2.clone())
.build()
)
```
Changes needed to get libp2p to run via `wasm32-unknown-unknown` in the browser
(both main thread and inside web workers).
Replaces wasm-timer with futures-timer and instant.
Co-authored-by: Oliver Wangler <oliver@wngr.de>
Require `NetworkBehaviourAction::{DialPeer,DialAddress}` to contain a
`ProtocolsHandler`. This allows a behaviour to attach custom state to its
handler. The behaviour would no longer need to track this state separately
during connection establishment, thus reducing state required in a behaviour.
E.g. in the case of `libp2p-kad` the behaviour can include a `GetRecord` request
in its handler, or e.g. in the case of `libp2p-request-response` the behaviour
can include the first request in the handler.
Return `ProtocolsHandler` on connection error and close. This allows a behaviour
to extract its custom state previously included in the handler on connection
failure and connection closing. E.g. in the case of `libp2p-kad` the behaviour
could extract the attached `GetRecord` from the handler of the failed connection
and then start another connection attempt with a new handler with the same
`GetRecord` or bubble up an error to the user.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Don't close connection if ping protocol is unsupported by remote. Previously, a
failed protocol negotation for ping caused a force close of the connection. As a
result, all nodes in a network had to support ping. To allow networks where some
nodes don't support ping, we now emit `PingFailure::Unsupported` once for every
connection on which ping is not supported.
Co-authored-by: Max Inden <mail@max-inden.de>
Not all implementations of `NetworkBehaviour` need all callbacks.
We've have been adding new callbacks with default implementations
for a while now. There is no reason the initial ones cannot also
be defaulted, thus making it easier create new implementations.
Co-authored-by: Max Inden <mail@max-inden.de>
- Change `PublicKey::into_protobuf_encoding` to
`PublicKey::to_protobuf_encoding`.
- Change `PublicKey::into_peer_id` to `PublicKey::to_peer_id`.
- Change `PeerId::from_public_key(PublicKey)` to
`PeerId::from_public_key(&PublicKey)`.
- Add `From<&PublicKey> for PeerId`.
Co-authored-by: Max Inden <mail@max-inden.de>
Change `Stream` implementation of `ExpandedSwarm` to return all
`SwarmEvents` instead of only the `NetworkBehaviour`'s events.
Remove `ExpandedSwarm::next_event`. Users can use `<ExpandedSwarm as
StreamExt>::next` instead.
Remove `ExpandedSwarm::next`. Users can use `<ExpandedSwarm as
StreamExt>::filter_map` instead.
Remove `Deref` and `DerefMut` implementations previously dereferencing
to the `NetworkBehaviour` on `Swarm`. Instead one can access the
`NetworkBehaviour` via `Swarm::behaviour` and `Swarm::behaviour_mut`.
Methods on `Swarm` can now be accessed directly, e.g. via
`my_swarm.local_peer_id()`.
Reasoning: Accessing the `NetworkBehaviour` of a `Swarm` through `Deref`
and `DerefMut` instead of a method call is an unnecessary complication,
especially for newcomers. In addition, `Swarm` is not a smart-pointer
and should thus not make use of `Deref` and `DerefMut`, see documentation
from the standard library below.
> Deref should only be implemented for smart pointers to avoid
confusion.
https://doc.rust-lang.org/std/ops/trait.Deref.html
* Implement `/dnsaddr` support on `libp2p-dns`.
To that end, since resolving `/dnsaddr` addresses needs
"fully qualified" multiaddresses when dialing, i.e. those
that end with the `/p2p/...` protocol, we make sure that
dialing always uses such fully qualified addresses by
appending the `/p2p` protocol as necessary. As a side-effect,
this adds support for dialing peers via "fully qualified"
addresses, as an alternative to using a `PeerId` together
with a `Multiaddr` with or without the `/p2p` protocol.
* Adapt libp2p-relay.
* Update versions, changelogs and small cleanups.
* Remove substream-specific protocol negotiation version.
Remove the option for a substream-specific multistream select protocol override.
The override at this granularity is no longer deemed useful, in particular because
it can usually not be configured for existing protocols like `libp2p-kad` and others.
There is a `Swarm`-scoped configuration for this version available since
[1858](https://github.com/libp2p/rust-libp2p/pull/1858).
* Update protocol crate versions and changelogs.
* Clean up documentation.
Move transport upgrade protocols from `protocols/`
to `transports/`, such that only "application protocols"
that depend on `libp2p-swarm` remain in `protocols/`,
whereas there is no such dependency in `transports/`
outside of integration tests.
Tweak README and top-level CHANGELOG.
* Update tomls.
* Let transports decide when to translate.
* Improve tcp transport.
* Update stuff.
* Remove background task. Enhance documentation.
To avoid spawning a background task and thread within
`TcpConfig::new()`, with communication via unbounded channels,
a `TcpConfig` now keeps track of the listening addresses
for port reuse in an `Arc<RwLock>`. Furthermore, an `IfWatcher`
is only used by a `TcpListenStream` if it listens on any interface
and directly polls the `IfWatcher` both for initialisation and
new events.
Includes some documentation and test enhancements.
* Reintroduce feature flags for tokio vs async-io.
To avoid having an extra reactor thread running for tokio
users and to make sure all TCP I/O uses the mio-based
tokio reactor.
Thereby run tests with both backends.
* Add missing files.
* Fix docsrs attributes.
* Update transports/tcp/src/lib.rs
Co-authored-by: Max Inden <mail@max-inden.de>
* Restore chat-tokio example.
* Forward poll_write_vectored for tokio's AsyncWrite.
* Update changelogs.
Co-authored-by: David Craven <david@craven.ch>
Co-authored-by: Max Inden <mail@max-inden.de>
`futures-codec` has not been updated in the recent months. It still
depends on `bytes` `v0.5` preventing all downstream dependencies to
upgrade to `bytes` `v1.0`.
This commit replaces `futures_codec` in favor of `asynchronous-codec`
The latter is a fully upgraded fork of the former.
In addition this commit upgrades:
- bytes to v1
- unsigned-varint to v0.6.0
- prost to v0.7
* feat: upgrade to multihash 0.13
`multihash` changes a lot internally, it is using stack allocation instead
of heap allocation. This leads to a few limitations in regards on how
`Multihash` can be used.
Therefore `PeerId` is now using a `Bytes` internally so that only minimal
changes are needed.
* Update versions and changelogs.
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
Co-authored-by: Roman S. Borschel <roman@parity.io>
* Streamline mplex and yamux configurations.
* For all configuration options that exist for both multiplexers
and have the same semantics, use the same names for the
configuration.
* Rename `Config` to `YamuxConfig` for consistentcy with
the majority of other protocols, e.g. `MplexConfig`, `PingConfig`,
`KademliaConfig`, etc.
* Completely hide `yamux` APIs within `libp2p-yamux`. This allows
to fully control the libp2p API and streamline it with other
muxer APIs, consciously choosing e.g. which configuration options
to make configurable in libp2p and which to fix to certain values.
It does also not necessarily prescribe new incompatible version bumps of
yamux for `libp2p-yamux`, as no `yamux` types are exposed. The cost
is some more duplication of configuration options in the API, as well
as the need to update `libp2p-yamux` if `yamux` introduces new
configuration options that `libp2p-yamux` wants to expose as well.
* Update CHANGELOGs.
* [multistream-select] Fix panic with V1Lazy and add integration tests.
Fixes a panic when using the `V1Lazy` negotiation protocol,
a regression introduced in https://github.com/libp2p/rust-libp2p/pull/1484.
Thereby adds integration tests for a transport upgrade with both
`V1` and `V1Lazy` to the `multistream-select` crate to prevent
future regressions.
* Cleanup.
* Update changelog.
* Refactor the ping protocol.
Such that pings are sent over a single substream, as it is
done in other libp2p implementations. Note that, since each
peer sends its pings over a single, dedicated substream,
every peer that participates in the protocol has effectively
two open substreams.
* Cleanup
* Update ping changelog.
* Update protocols/ping/src/protocol.rs
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Max Inden <mail@max-inden.de>
* Emit events for active connection close and fix `disconnect()`.
The `Network` does currently not emit events for actively
closed connections, e.g. via `EstablishedConnection::close`
or `ConnectedPeer::disconnect()`. As a result, when actively
closing connections, there will be `ConnectionEstablished`
events emitted without eventually a matching `ConnectionClosed`
event. This seems undesirable and has the consequence that
the `Swarm::ban_peer_id` feature in `libp2p-swarm` does not
result in appropriate calls to `NetworkBehaviour::inject_connection_closed`
and `NetworkBehaviour::inject_disconnected`. Furthermore,
the `disconnect()` functionality in `libp2p-core` is currently
broken as it leaves the `Pool` in an inconsistent state.
This commit does the following:
1. When connection background tasks are dropped
(i.e. removed from the `Manager`), they
always terminate immediately, without attempting
an orderly close of the connection.
2. An orderly close is sent to the background task
of a connection as a regular command. The
background task emits a `Closed` event
before terminating.
3. `Pool::disconnect()` removes all connection
tasks for the affected peer from the `Manager`,
i.e. without an orderly close, thereby also
fixing the discovered state inconsistency
due to not removing the corresponding entries
in the `Pool` itself after removing them from
the `Manager`.
4. A new test is added to `libp2p-swarm` that
exercises the ban/unban functionality and
places assertions on the number and order
of calls to the `NetworkBehaviour`. In that
context some new testing utilities have
been added to `libp2p-swarm`.
This addresses https://github.com/libp2p/rust-libp2p/issues/1584.
* Update swarm/src/lib.rs
Co-authored-by: Toralf Wittner <tw@dtex.org>
* Incorporate some review feedback.
* Adapt to changes in master.
* More verbose panic messages.
* Simplify
There is no need for a `StartClose` future.
* Fix doc links.
* Further small cleanup.
* Update CHANGELOGs and versions.
Co-authored-by: Toralf Wittner <tw@dtex.org>
