Previously, the negotiated PeerId was included in the swarm event and
inject_dial_failure’s arguments while the expected one was absent. This
patch adds the negotiated PeerId to the DialError and includes the expected
one in the notifications.
Co-authored-by: Roland Kuhn <rk@rkuhn.info>
Allows `NetworkBehaviour` implementations to dial a peer, but instruct
the dialed connection to be upgraded as if it were the listening
endpoint.
This is needed when establishing direct connections through NATs and/or
Firewalls (hole punching). When hole punching via TCP (QUIC is different
but similar) both ends dial the other at the same time resulting in a
simultaneously opened TCP connection. To disambiguate who is the dialer
and who the listener there are two options:
1. Use the Simultaneous Open Extension of Multistream Select. See
[sim-open] specification and [sim-open-rust] Rust implementation.
2. Disambiguate the role (dialer or listener) based on the role within
the DCUtR [dcutr] protocol. More specifically the node initiating the
DCUtR process will act as a listener and the other as a dialer.
This commit enables (2), i.e. enables the DCUtR protocol to specify the
role used once the connection is established.
While on the positive side (2) requires one round trip less than (1), on
the negative side (2) only works for coordinated simultaneous dials.
I.e. when a simultaneous dial happens by chance, and not coordinated via
DCUtR, the connection attempt fails when only (2) is in place.
[sim-open]: https://github.com/libp2p/specs/blob/master/connections/simopen.md
[sim-open-rust]: https://github.com/libp2p/rust-libp2p/pull/2066
[dcutr]: https://github.com/libp2p/specs/blob/master/relay/DCUtR.md
Enable a `NetworkBehaviour` or a user via `Swarm::dial` to override the
dial concurrency factor per dial. This is especially relevant in the
case of libp2p-autonat where one wants to probe addresses in sequence to
reduce the amount of work a remote peer can force onto the local node.
To enable the above, this commit also:
- Introduces `libp2p_core::DialOpts` mirroring `libp2p_swarm::DialOpts`.
Passed as an argument to `Network::dial`.
- Removes `Peer::dial` in favor of `Network::dial`.
- Simplifies `Swarm::dial_with_handler`.
The introduction of `libp2p_core::DialOpts` will be useful beyond this
feature, e.g. for https://github.com/libp2p/rust-libp2p/pull/2363.
In the long run I would like to move and merge `libp2p_core::Network`
and `libp2p_core::Pool` into `libp2p_swarm::Swarm` thus deduplicating
`libp2p_core::DialOpts` and `libp2p_swarm::DialOpts`.
Fixes#2385.
Add convenience function `is_relayed` to `ConnectedPoint`, determining
whether a connection is relayed based on whether it contains a
`Protocol::P2pCircuit`.
* core: Mark "unused" field with "_"
We need to keep this marker type to ensure that the type continues
to be required to be pinned.
* tranports/noise: Derive `Default` for `Config`
`false` is the default for `bool`, we can derive this.
* protocols/request-response: Remove unused fields
These are already included the `RequestResponseMessage::Request`
variant.
* *: Allow clippy's large-enum-variant lint
Tackling these suggestions would require performance measurement
which we don't want to do at this stage.
Co-authored-by: Max Inden <mail@max-inden.de>
Don't report events of a connection to the `NetworkBehaviour`, if connection has
been established while the remote peer was banned. Among other guarantees this
upholds that `NetworkBehaviour::inject_event` is never called without a previous
`NetworkBehaviour::inject_connection_established` for said connection.
Co-authored-by: Max Inden <mail@max-inden.de>
Changes needed to get libp2p to run via `wasm32-unknown-unknown` in the browser
(both main thread and inside web workers).
Replaces wasm-timer with futures-timer and instant.
Co-authored-by: Oliver Wangler <oliver@wngr.de>
Concurrently dial address candidates within a single dial attempt.
Main motivation for this feature is to increase success rate on hole punching
(see https://github.com/libp2p/rust-libp2p/issues/1896#issuecomment-885894496
for details). Though, as a nice side effect, as one would expect, it does
improve connection establishment time.
Cleanups and fixes done along the way:
- Merge `pool.rs` and `manager.rs`.
- Instead of manually implementing state machines in `task.rs` use
`async/await`.
- Fix bug where `NetworkBehaviour::inject_connection_closed` is called without a
previous `NetworkBehaviour::inject_connection_established` (see
https://github.com/libp2p/rust-libp2p/issues/2242).
- Return handler to behaviour on incoming connection limit error. Missed in
https://github.com/libp2p/rust-libp2p/issues/2242.
Create a `ListenersEvent::Closed` when a listener is removed via
`Swarm::remove_listener`. This makes it more consistent with `Swarm::listen_on`,
and also informs the Swarm about the associated expired addresses.
Co-authored-by: Max Inden <mail@max-inden.de>
Implement the libp2p rendezvous protocol.
> A lightweight mechanism for generalized peer discovery. It can be used for
bootstrap purposes, real time peer discovery, application specific routing, and
so on.
Co-authored-by: rishflab <rishflab@hotmail.com>
Co-authored-by: Daniel Karzel <daniel@comit.network>
Require `NetworkBehaviourAction::{DialPeer,DialAddress}` to contain a
`ProtocolsHandler`. This allows a behaviour to attach custom state to its
handler. The behaviour would no longer need to track this state separately
during connection establishment, thus reducing state required in a behaviour.
E.g. in the case of `libp2p-kad` the behaviour can include a `GetRecord` request
in its handler, or e.g. in the case of `libp2p-request-response` the behaviour
can include the first request in the handler.
Return `ProtocolsHandler` on connection error and close. This allows a behaviour
to extract its custom state previously included in the handler on connection
failure and connection closing. E.g. in the case of `libp2p-kad` the behaviour
could extract the attached `GetRecord` from the handler of the failed connection
and then start another connection attempt with a new handler with the same
`GetRecord` or bubble up an error to the user.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Co-authored-by: István Zólyomi <istvan.zolyomi@iop-ventures.com>
Co-authored-by: Ruben De Smet <ruben.de.smet@rubdos.be>
Co-authored-by: Max Inden <mail@max-inden.de>
- Change `PublicKey::into_protobuf_encoding` to
`PublicKey::to_protobuf_encoding`.
- Change `PublicKey::into_peer_id` to `PublicKey::to_peer_id`.
- Change `PeerId::from_public_key(PublicKey)` to
`PeerId::from_public_key(&PublicKey)`.
- Add `From<&PublicKey> for PeerId`.
Co-authored-by: Max Inden <mail@max-inden.de>
* Fix needless question mark operator
* Don't convert from u64 to u64
LocalStreamId is already a u64, no need to convert.
* Don't use `.into()` to convert to the same type
* Don't specify lifetime if it can be inferred
* Use `vec!` macro if we immediately push to it
This creates the vector with the appropriate capacity.
* Don't index array when taking a reference is enough
Co-authored-by: Max Inden <mail@max-inden.de>
1. Deprecating the `write_one` function
Semantically, this function is a composition of `write_with_len_prefix` and
`io.close()`. This represents a footgun because the `close` functionality is
not obvious and only mentioned in the docs. Using this function multiple times
on a single substream will produces hard to debug behaviour.
2. Deprecating `read_one` and `write_with_len_prefix` functions
3. Introducing `write_length_prefixed` and `read_length_prefixed`
- These functions are symmetric and do exactly what you would expect, just
writing to the socket without closing
- They also have a symmetric interface (no more custom errors, just `io::Error`)
Co-authored-by: Max Inden <mail@max-inden.de>
* Implement `/dnsaddr` support on `libp2p-dns`.
To that end, since resolving `/dnsaddr` addresses needs
"fully qualified" multiaddresses when dialing, i.e. those
that end with the `/p2p/...` protocol, we make sure that
dialing always uses such fully qualified addresses by
appending the `/p2p` protocol as necessary. As a side-effect,
this adds support for dialing peers via "fully qualified"
addresses, as an alternative to using a `PeerId` together
with a `Multiaddr` with or without the `/p2p` protocol.
* Adapt libp2p-relay.
* Update versions, changelogs and small cleanups.
* Shorten and unify Debug impls of public keys.
ed25519 `PublicKey` and secp256k1 `PublicKey` get a new `Debug`
impl, while RSAs `PublicKey` is aligned with the others for uniformity.
* Update version and changelog.
* Make clippy "happy".
Address all clippy complaints that are not purely stylistic (or even
have corner cases with false positives). Ignore all "style" and "pedantic" lints.
* Fix tests.
* Undo unnecessary API change.
* Update tomls.
* Let transports decide when to translate.
* Improve tcp transport.
* Update stuff.
* Remove background task. Enhance documentation.
To avoid spawning a background task and thread within
`TcpConfig::new()`, with communication via unbounded channels,
a `TcpConfig` now keeps track of the listening addresses
for port reuse in an `Arc<RwLock>`. Furthermore, an `IfWatcher`
is only used by a `TcpListenStream` if it listens on any interface
and directly polls the `IfWatcher` both for initialisation and
new events.
Includes some documentation and test enhancements.
* Reintroduce feature flags for tokio vs async-io.
To avoid having an extra reactor thread running for tokio
users and to make sure all TCP I/O uses the mio-based
tokio reactor.
Thereby run tests with both backends.
* Add missing files.
* Fix docsrs attributes.
* Update transports/tcp/src/lib.rs
Co-authored-by: Max Inden <mail@max-inden.de>
* Restore chat-tokio example.
* Forward poll_write_vectored for tokio's AsyncWrite.
* Update changelogs.
Co-authored-by: David Craven <david@craven.ch>
Co-authored-by: Max Inden <mail@max-inden.de>
* Refactor and extend configurable connection limits.
To better track different connection counts, permit configurable
limits for these counts and make these available for
inspection efficiently, introduce dedicated connection counters
via a `ConnectionCounters` structure that is exposed on the
API via the `NetworkInfo`. All connection or connection
states that are counted in this way can also have effective
configurable limits.
* Cleanup
* Add missing file.
* Refine naming and config API.
* Update core/CHANGELOG.md
Co-authored-by: Max Inden <mail@max-inden.de>
* Update core/CHANGELOG.md
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Max Inden <mail@max-inden.de>
* feat: upgrade to multihash 0.13
`multihash` changes a lot internally, it is using stack allocation instead
of heap allocation. This leads to a few limitations in regards on how
`Multihash` can be used.
Therefore `PeerId` is now using a `Bytes` internally so that only minimal
changes are needed.
* Update versions and changelogs.
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
Co-authored-by: Roman S. Borschel <roman@parity.io>
In all cases, we pass the PeerId directly as the connection info.
The flexbility of doing something different here was originally
envisioned but turned out to be never needed.
For reference see: https://github.com/libp2p/rust-libp2p/issues/1798#issuecomment-714526056
Co-authored-by: Max Inden <mail@max-inden.de>
* [multistream-select] Fix panic with V1Lazy and add integration tests.
Fixes a panic when using the `V1Lazy` negotiation protocol,
a regression introduced in https://github.com/libp2p/rust-libp2p/pull/1484.
Thereby adds integration tests for a transport upgrade with both
`V1` and `V1Lazy` to the `multistream-select` crate to prevent
future regressions.
* Cleanup.
* Update changelog.
