Within `Provider::new_stream` we wait for the socket to become writable
(`stream.writable`), before returning it as a stream. In other words, we
are waiting for the socket to connect before returning it as a new TCP
connection. Waiting to connect before returning it as a new TCP
connection allows us to catch TCP connection establishment errors early.
While `stream.writable` drives the process of connecting, it does not
surface potential connection errors themselves. These need to be
explicitly collected via `TcpSocket::take_error`. If not explicitly
collected, they will surface on future operations on the socket.
For now this commit explicitly calls `TcpSocket::take_error` when using
`async-io` only. `tokio` introduced the method (`take_error`) in
https://github.com/tokio-rs/tokio/pull/4364 though later reverted it in
https://github.com/tokio-rs/tokio/pull/4392. Once re-reverted, the same
patch can be applied when using `libp2p-tcp` with tokio.
---
One example on how this bug surfaces today:
A `/dnsaddr/xxx` `Multiaddr` can potentially resolve to multiple IP
addresses, e.g. to the IPv4 and the IPv6 addresses of a node.
`libp2p-dns` tries dialing each of them in sequence using `libp2p-tcp`,
returning the first that `libp2p-tcp` reports as successful.
Say that the local node tries the IPv6 address first. In the scenario
where the local node's networking stack does not support IPv6, e.g. has
no IPv6 route, the connection attempt to the resolved IPv6 address of
the remote node fails. Given that `libp2p-tcp` does not call
`TcpSocket::take_error`, it would falsly report the TCP connection
attempt as successful. `libp2p-dns` would receive the "successful" TCP
connection for the IPv6 address from `libp2p-tcp` and would not attempt
to dial the IPv4 address, even though it supports IPv4, and instead
bubble up the "successful" IPv6 TCP connection. Only later, when writing
or reading from the "successful" IPv6 TCP connection, would the IPv6
error surface.
Co-authored-by: Oliver Wangler <oliver@wngr.de>
When a peer disconnects, reservations associated with that peer are removed from
the set of reservations of the peer. In case the set of reservations for the
peer is now empty, remove the entire peer.
Same when a reservation times out.
Previously, the negotiated PeerId was included in the swarm event and
inject_dial_failure’s arguments while the expected one was absent. This
patch adds the negotiated PeerId to the DialError and includes the expected
one in the notifications.
Co-authored-by: Roland Kuhn <rk@rkuhn.info>
Allows `NetworkBehaviour` implementations to dial a peer, but instruct
the dialed connection to be upgraded as if it were the listening
endpoint.
This is needed when establishing direct connections through NATs and/or
Firewalls (hole punching). When hole punching via TCP (QUIC is different
but similar) both ends dial the other at the same time resulting in a
simultaneously opened TCP connection. To disambiguate who is the dialer
and who the listener there are two options:
1. Use the Simultaneous Open Extension of Multistream Select. See
[sim-open] specification and [sim-open-rust] Rust implementation.
2. Disambiguate the role (dialer or listener) based on the role within
the DCUtR [dcutr] protocol. More specifically the node initiating the
DCUtR process will act as a listener and the other as a dialer.
This commit enables (2), i.e. enables the DCUtR protocol to specify the
role used once the connection is established.
While on the positive side (2) requires one round trip less than (1), on
the negative side (2) only works for coordinated simultaneous dials.
I.e. when a simultaneous dial happens by chance, and not coordinated via
DCUtR, the connection attempt fails when only (2) is in place.
[sim-open]: https://github.com/libp2p/specs/blob/master/connections/simopen.md
[sim-open-rust]: https://github.com/libp2p/rust-libp2p/pull/2066
[dcutr]: https://github.com/libp2p/specs/blob/master/relay/DCUtR.md
This commit adds an implementation for the circuit relay v2 protocol to be used
as a relay server, i.e. it supports incoming HOP requests and outgoing STOP
requests and used as a relay clients, i.e. outgoing HOP requests and incoming
STOP requests.
The existing circuit relay v1 protocol implementation is moved to
protocols/relay/src/v1.
Co-authored-by: ronzigelman <ronzigelman@gmail.com>
Co-authored-by: Marco Munizaga <git@marcopolo.io>
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Co-authored-by: Elena Frank <57632201+elenaf9@users.noreply.github.com>
Since https://github.com/libp2p/rust-libp2p/pull/2248 dial attempts are
no longer reported per address, but instead reported for all addresses
of a single dial at once.
This commit updates the comment accordingly.
This commit adds a behaviour protocol that implements the AutoNAT specification.
It enables users to detect whether they are behind a NAT. The Autonat Protocol
implements a Codec for the Request-Response protocol, and wraps it in a new
Network Behaviour with some additional functionality.
Co-authored-by: David Craven <david@craven.ch>
Co-authored-by: Max Inden <mail@max-inden.de>
Enable a `NetworkBehaviour` or a user via `Swarm::dial` to override the
dial concurrency factor per dial. This is especially relevant in the
case of libp2p-autonat where one wants to probe addresses in sequence to
reduce the amount of work a remote peer can force onto the local node.
To enable the above, this commit also:
- Introduces `libp2p_core::DialOpts` mirroring `libp2p_swarm::DialOpts`.
Passed as an argument to `Network::dial`.
- Removes `Peer::dial` in favor of `Network::dial`.
- Simplifies `Swarm::dial_with_handler`.
The introduction of `libp2p_core::DialOpts` will be useful beyond this
feature, e.g. for https://github.com/libp2p/rust-libp2p/pull/2363.
In the long run I would like to move and merge `libp2p_core::Network`
and `libp2p_core::Pool` into `libp2p_swarm::Swarm` thus deduplicating
`libp2p_core::DialOpts` and `libp2p_swarm::DialOpts`.
Fixes#2385.
Handling multiple interfaces in mdns. The socket logic was moved into an
instance while the mdns behaviour watches for interface changes and creates new
instances with a dedicated send/recv socket.
Co-authored-by: Max Inden <mail@max-inden.de>
This PR adds some bandwidth improvements to gossipsub.
After a bit of inspection on live networks a number of improvements have been
made that can help reduce unnecessary bandwidth on gossipsub networks. This PR
introduces the following:
- A 1:1 tracking of all in-flight IWANT requests. This not only ensures that all
IWANT requests are answered and peers penalized accordingly, but gossipsub
will no no longer create multiple IWANT requests for multiple peers.
Previously, gossipsub sampled the in-flight IWANT requests in order to
penalize peers for not responding with a high probability that we would detect
non-responsive nodes. Futher, it was possible to re-request IWANT messages
that are already being requested causing added duplication in messages and
wasted unnecessary IWANT control messages. This PR shifts this logic to only
request message ids that we are not currently requesting from peers.
- Triangle routing naturally gives rise to unnecessary duplicates. Consider a
mesh of 4 peers that are interconnected. Peer 1 sends a new message to 2,3,4.
2 propagates to 3,4 and 3 propagates to 2,4 and 4 propagates to 2,3. In this
case 3 has received the message 3 times. If we keep track of peers that send
us messages, when publishing or forwarding we no longer send to peers that
have sent us a duplicate, we can eliminate one of the sends in the scenario
above. This only occurs when message validation is async however. This PR adds
this logic to remove some elements of triangle-routing duplicates.
Co-authored-by: Divma <26765164+divagant-martian@users.noreply.github.com>
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Diva M <divma@protonmail.com>
Add convenience function `is_relayed` to `ConnectedPoint`, determining
whether a connection is relayed based on whether it contains a
`Protocol::P2pCircuit`.
Implement `NetworkBehaviour` on `either::Either<L, R>` where both L
and R both implement `NetworkBehaviour`.
Add NetworkBehaviour derive tests for Either and Toggle
Co-authored-by: Max Inden <mail@max-inden.de>
* Adapt examples to async style loop
* Adapt async style loop for chat.rs
* Adapt async style loop for distributed-key-value-store.rs
* Adapt async style loop for gossibsub-chat.rs
* Adapt async style loop for ipfs-private.rs
* Adapt ping to use async
* Update tutorial crate to reflect new changes
Co-authored-by: Max Inden <mail@max-inden.de>
Propagate messages only to the target peers and not all connected peers.
Co-authored-by: Victor Ermolaev <victorermolaev@gmail.com>
Co-authored-by: Max Inden <mail@max-inden.de>
* core: Mark "unused" field with "_"
We need to keep this marker type to ensure that the type continues
to be required to be pinned.
* tranports/noise: Derive `Default` for `Config`
`false` is the default for `bool`, we can derive this.
* protocols/request-response: Remove unused fields
These are already included the `RequestResponseMessage::Request`
variant.
* *: Allow clippy's large-enum-variant lint
Tackling these suggestions would require performance measurement
which we don't want to do at this stage.
Co-authored-by: Max Inden <mail@max-inden.de>
