Instead of having a mix of `poll_event`, `poll_outbound` and `poll_close`, we
flatten the entire interface of `StreamMuxer` into 4 individual functions:
- `poll_inbound`
- `poll_outbound`
- `poll_address_change`
- `poll_close`
This design is closer to the design of other async traits like `AsyncRead` and
`AsyncWrite`. It also allows us to delete the `StreamMuxerEvent`.
* misc/metrics: Explicitly delegate event recording to each recorder
This allows delegating a single event to multiple `Recorder`s. That enables e.g. the
`identify::Metrics` `Recorder` to act both on `IdentifyEvent` and `SwarmEvent`. The latter enables
it to garbage collect per peer data on disconnects.
* protocols/dcutr: Expose PROTOCOL_NAME
* protocols/identify: Expose PROTOCOL_NAME and PUSH_PROTOCOL_NAME
* protocols/ping: Expose PROTOCOL_NAME
* protocols/relay: Expose HOP_PROTOCOL_NAME and STOP_PROTOCOL_NAME
* misc/metrics: Track # connected nodes supporting specific protocol
An example metric exposed with this patch:
```
libp2p_identify_protocols{protocol="/ipfs/ping/1.0.0"} 10
```
This implies that 10 of the currently connected nodes support the ping protocol.
Remove the concept of individual `Transport::Listener` streams from `Transport`.
Instead the `Transport` is polled directly via `Transport::poll`. The
`Transport` is now responsible for driving its listeners.
* protocols/relay: Use prost-codec
* protocols/relay: Respond to at most one incoming reservation request
Also changes poll order prioritizing
- Error handling over everything.
- Queued events over existing circuits.
- Existing circuits over accepting new circuits.
- Reservation management of existing reservation over new reservation
requests.
* protocols/relay: Deny <= 8 incoming circuit requests with one per peer
* protocols/relay: Deny new circuits before accepting new circuits
Previously `libp2p-swarm` required a `Transport` to be `Clone`. Methods
on `Transport`, e.g. `Transport::dial` would take ownership, requiring
e.g. a `Clone::clone` before calling `Transport::dial`.
The requirement of `Transport` to be `Clone` is no longer needed in
`libp2p-swarm`. E.g. concurrent dialing can be done without a clone per
dial.
This commit removes the requirement of `Clone` for `Transport` in
`libp2p-swarm`. As a follow-up methods on `Transport` no longer take
ownership, but instead a mutable reference (`&mut self`).
On the one hand this simplifies `libp2p-swarm`, on the other it
simplifies implementations of `Transport`.
* build(deps): Update prost-build requirement from 0.9 to 0.10
Updates the requirements on [prost-build](https://github.com/tokio-rs/prost) to permit the latest version.
- [Release notes](https://github.com/tokio-rs/prost/releases)
- [Commits](https://github.com/tokio-rs/prost/commits)
---
updated-dependencies:
- dependency-name: prost-build
dependency-type: direct:production
...
Signed-off-by: dependabot[bot] <support@github.com>
* .github/workflow: Don't run integration test in container
* .github/workflow: Don't run doc step in container
* .github/workflows: Remove component docs
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Max Inden <mail@max-inden.de>
* *: Import `libp2p` with `default-features = false`
While not a win in most cases, it reduces compile time for tests of
individual crates.
* Cargo.toml: Set features for examples
A `ProtocolsHandler`, now `ConnectionHandler`, handels a connection, not
a protocol. Thus the name `CONNECTIONHandler` is more appropriate.
Next to the rename of `ProtocolsHandler` this commit renames the `mod
protocols_handler` to `mod handler`. Finally all combinators (e.g.
`ProtocolsHandlerSelect`) are renamed appropriately.
When a peer disconnects, reservations associated with that peer are removed from
the set of reservations of the peer. In case the set of reservations for the
peer is now empty, remove the entire peer.
Same when a reservation times out.
Allows `NetworkBehaviour` implementations to dial a peer, but instruct
the dialed connection to be upgraded as if it were the listening
endpoint.
This is needed when establishing direct connections through NATs and/or
Firewalls (hole punching). When hole punching via TCP (QUIC is different
but similar) both ends dial the other at the same time resulting in a
simultaneously opened TCP connection. To disambiguate who is the dialer
and who the listener there are two options:
1. Use the Simultaneous Open Extension of Multistream Select. See
[sim-open] specification and [sim-open-rust] Rust implementation.
2. Disambiguate the role (dialer or listener) based on the role within
the DCUtR [dcutr] protocol. More specifically the node initiating the
DCUtR process will act as a listener and the other as a dialer.
This commit enables (2), i.e. enables the DCUtR protocol to specify the
role used once the connection is established.
While on the positive side (2) requires one round trip less than (1), on
the negative side (2) only works for coordinated simultaneous dials.
I.e. when a simultaneous dial happens by chance, and not coordinated via
DCUtR, the connection attempt fails when only (2) is in place.
[sim-open]: https://github.com/libp2p/specs/blob/master/connections/simopen.md
[sim-open-rust]: https://github.com/libp2p/rust-libp2p/pull/2066
[dcutr]: https://github.com/libp2p/specs/blob/master/relay/DCUtR.md
This commit adds an implementation for the circuit relay v2 protocol to be used
as a relay server, i.e. it supports incoming HOP requests and outgoing STOP
requests and used as a relay clients, i.e. outgoing HOP requests and incoming
STOP requests.
The existing circuit relay v1 protocol implementation is moved to
protocols/relay/src/v1.
Co-authored-by: ronzigelman <ronzigelman@gmail.com>
Co-authored-by: Marco Munizaga <git@marcopolo.io>
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Co-authored-by: Elena Frank <57632201+elenaf9@users.noreply.github.com>
Don't report events of a connection to the `NetworkBehaviour`, if connection has
been established while the remote peer was banned. Among other guarantees this
upholds that `NetworkBehaviour::inject_event` is never called without a previous
`NetworkBehaviour::inject_connection_established` for said connection.
Co-authored-by: Max Inden <mail@max-inden.de>
Enable advanced dialing requests both on `Swarm` and via
`NetworkBehaviourAction`. Users can now trigger a dial with a specific
set of addresses, optionally extended via
`NetworkBehaviour::addresses_of_peer`. In addition the whole process is
now modelled in a type safe way via the builder pattern.
Example of a `NetworkBehaviour` requesting a dial to a specific peer
with a set of addresses additionally extended through
`NetworkBehaviour::addresses_of_peer`:
```rust
NetworkBehaviourAction::Dial {
opts: DialOpts::peer_id(peer_id)
.condition(PeerCondition::Always)
.addresses(addresses)
.extend_addresses_through_behaviour()
.build(),
handler,
}
```
Example of a user requesting a dial to an unknown peer with a single
address via `Swarm`:
```rust
swarm1.dial(
DialOpts::unknown_peer_id()
.address(addr2.clone())
.build()
)
```
Changes needed to get libp2p to run via `wasm32-unknown-unknown` in the browser
(both main thread and inside web workers).
Replaces wasm-timer with futures-timer and instant.
Co-authored-by: Oliver Wangler <oliver@wngr.de>
Concurrently dial address candidates within a single dial attempt.
Main motivation for this feature is to increase success rate on hole punching
(see https://github.com/libp2p/rust-libp2p/issues/1896#issuecomment-885894496
for details). Though, as a nice side effect, as one would expect, it does
improve connection establishment time.
Cleanups and fixes done along the way:
- Merge `pool.rs` and `manager.rs`.
- Instead of manually implementing state machines in `task.rs` use
`async/await`.
- Fix bug where `NetworkBehaviour::inject_connection_closed` is called without a
previous `NetworkBehaviour::inject_connection_established` (see
https://github.com/libp2p/rust-libp2p/issues/2242).
- Return handler to behaviour on incoming connection limit error. Missed in
https://github.com/libp2p/rust-libp2p/issues/2242.
