Previously `libp2p-swarm` required a `Transport` to be `Clone`. Methods
on `Transport`, e.g. `Transport::dial` would take ownership, requiring
e.g. a `Clone::clone` before calling `Transport::dial`.
The requirement of `Transport` to be `Clone` is no longer needed in
`libp2p-swarm`. E.g. concurrent dialing can be done without a clone per
dial.
This commit removes the requirement of `Clone` for `Transport` in
`libp2p-swarm`. As a follow-up methods on `Transport` no longer take
ownership, but instead a mutable reference (`&mut self`).
On the one hand this simplifies `libp2p-swarm`, on the other it
simplifies implementations of `Transport`.
* build(deps): Update prost-build requirement from 0.9 to 0.10
Updates the requirements on [prost-build](https://github.com/tokio-rs/prost) to permit the latest version.
- [Release notes](https://github.com/tokio-rs/prost/releases)
- [Commits](https://github.com/tokio-rs/prost/commits)
---
updated-dependencies:
- dependency-name: prost-build
dependency-type: direct:production
...
Signed-off-by: dependabot[bot] <support@github.com>
* .github/workflow: Don't run integration test in container
* .github/workflow: Don't run doc step in container
* .github/workflows: Remove component docs
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Max Inden <mail@max-inden.de>
A `ProtocolsHandler`, now `ConnectionHandler`, handels a connection, not
a protocol. Thus the name `CONNECTIONHandler` is more appropriate.
Next to the rename of `ProtocolsHandler` this commit renames the `mod
protocols_handler` to `mod handler`. Finally all combinators (e.g.
`ProtocolsHandlerSelect`) are renamed appropriately.
Propagate messages only to the target peers and not all connected peers.
Co-authored-by: Victor Ermolaev <victorermolaev@gmail.com>
Co-authored-by: Max Inden <mail@max-inden.de>
Don't report events of a connection to the `NetworkBehaviour`, if connection has
been established while the remote peer was banned. Among other guarantees this
upholds that `NetworkBehaviour::inject_event` is never called without a previous
`NetworkBehaviour::inject_connection_established` for said connection.
Co-authored-by: Max Inden <mail@max-inden.de>
Enable advanced dialing requests both on `Swarm` and via
`NetworkBehaviourAction`. Users can now trigger a dial with a specific
set of addresses, optionally extended via
`NetworkBehaviour::addresses_of_peer`. In addition the whole process is
now modelled in a type safe way via the builder pattern.
Example of a `NetworkBehaviour` requesting a dial to a specific peer
with a set of addresses additionally extended through
`NetworkBehaviour::addresses_of_peer`:
```rust
NetworkBehaviourAction::Dial {
opts: DialOpts::peer_id(peer_id)
.condition(PeerCondition::Always)
.addresses(addresses)
.extend_addresses_through_behaviour()
.build(),
handler,
}
```
Example of a user requesting a dial to an unknown peer with a single
address via `Swarm`:
```rust
swarm1.dial(
DialOpts::unknown_peer_id()
.address(addr2.clone())
.build()
)
```
Require `NetworkBehaviourAction::{DialPeer,DialAddress}` to contain a
`ProtocolsHandler`. This allows a behaviour to attach custom state to its
handler. The behaviour would no longer need to track this state separately
during connection establishment, thus reducing state required in a behaviour.
E.g. in the case of `libp2p-kad` the behaviour can include a `GetRecord` request
in its handler, or e.g. in the case of `libp2p-request-response` the behaviour
can include the first request in the handler.
Return `ProtocolsHandler` on connection error and close. This allows a behaviour
to extract its custom state previously included in the handler on connection
failure and connection closing. E.g. in the case of `libp2p-kad` the behaviour
could extract the attached `GetRecord` from the handler of the failed connection
and then start another connection attempt with a new handler with the same
`GetRecord` or bubble up an error to the user.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Not all implementations of `NetworkBehaviour` need all callbacks.
We've have been adding new callbacks with default implementations
for a while now. There is no reason the initial ones cannot also
be defaulted, thus making it easier create new implementations.
Co-authored-by: Max Inden <mail@max-inden.de>
- Change `PublicKey::into_protobuf_encoding` to
`PublicKey::to_protobuf_encoding`.
- Change `PublicKey::into_peer_id` to `PublicKey::to_peer_id`.
- Change `PeerId::from_public_key(PublicKey)` to
`PeerId::from_public_key(&PublicKey)`.
- Add `From<&PublicKey> for PeerId`.
Co-authored-by: Max Inden <mail@max-inden.de>
1. Deprecating the `write_one` function
Semantically, this function is a composition of `write_with_len_prefix` and
`io.close()`. This represents a footgun because the `close` functionality is
not obvious and only mentioned in the docs. Using this function multiple times
on a single substream will produces hard to debug behaviour.
2. Deprecating `read_one` and `write_with_len_prefix` functions
3. Introducing `write_length_prefixed` and `read_length_prefixed`
- These functions are symmetric and do exactly what you would expect, just
writing to the socket without closing
- They also have a symmetric interface (no more custom errors, just `io::Error`)
Co-authored-by: Max Inden <mail@max-inden.de>
Remove `Deref` and `DerefMut` implementations previously dereferencing
to the `NetworkBehaviour` on `Swarm`. Instead one can access the
`NetworkBehaviour` via `Swarm::behaviour` and `Swarm::behaviour_mut`.
Methods on `Swarm` can now be accessed directly, e.g. via
`my_swarm.local_peer_id()`.
Reasoning: Accessing the `NetworkBehaviour` of a `Swarm` through `Deref`
and `DerefMut` instead of a method call is an unnecessary complication,
especially for newcomers. In addition, `Swarm` is not a smart-pointer
and should thus not make use of `Deref` and `DerefMut`, see documentation
from the standard library below.
> Deref should only be implemented for smart pointers to avoid
confusion.
https://doc.rust-lang.org/std/ops/trait.Deref.html
* Implement `/dnsaddr` support on `libp2p-dns`.
To that end, since resolving `/dnsaddr` addresses needs
"fully qualified" multiaddresses when dialing, i.e. those
that end with the `/p2p/...` protocol, we make sure that
dialing always uses such fully qualified addresses by
appending the `/p2p` protocol as necessary. As a side-effect,
this adds support for dialing peers via "fully qualified"
addresses, as an alternative to using a `PeerId` together
with a `Multiaddr` with or without the `/p2p` protocol.
* Adapt libp2p-relay.
* Update versions, changelogs and small cleanups.
* Remove substream-specific protocol negotiation version.
Remove the option for a substream-specific multistream select protocol override.
The override at this granularity is no longer deemed useful, in particular because
it can usually not be configured for existing protocols like `libp2p-kad` and others.
There is a `Swarm`-scoped configuration for this version available since
[1858](https://github.com/libp2p/rust-libp2p/pull/1858).
* Update protocol crate versions and changelogs.
* Clean up documentation.
* Make clippy "happy".
Address all clippy complaints that are not purely stylistic (or even
have corner cases with false positives). Ignore all "style" and "pedantic" lints.
* Fix tests.
* Undo unnecessary API change.
`futures-codec` has not been updated in the recent months. It still
depends on `bytes` `v0.5` preventing all downstream dependencies to
upgrade to `bytes` `v1.0`.
This commit replaces `futures_codec` in favor of `asynchronous-codec`
The latter is a fully upgraded fork of the former.
In addition this commit upgrades:
- bytes to v1
- unsigned-varint to v0.6.0
- prost to v0.7
* feat: upgrade to multihash 0.13
`multihash` changes a lot internally, it is using stack allocation instead
of heap allocation. This leads to a few limitations in regards on how
`Multihash` can be used.
Therefore `PeerId` is now using a `Bytes` internally so that only minimal
changes are needed.
* Update versions and changelogs.
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
Co-authored-by: Roman S. Borschel <roman@parity.io>
