Previously, a `NetworkBehaviour` could report an `AddressScore` for an external address. This score was a `u32` and addresses would be ranked amongst those.
In reality, an address is either confirmed to be publicly reachable (via a protocol such as AutoNAT) or merely represents a candidate that might be an external address. In a way, addresses are guilty (private) until proven innocent (publicly reachable).
When a `NetworkBehaviour` reports an address candidate, we perform address translation on it to potentially correct for ephemeral ports of TCP. These candidates are then injected back into the `NetworkBehaviour`. Protocols such as AutoNAT can use these addresses as a source for probing their NAT status. Once confirmed, they can emit a `ToSwarm::ExternalAddrConfirmed` event which again will be passed to all `NetworkBehaviour`s.
This simplified approach will allow us implement Kademlia's client-mode (https://github.com/libp2p/rust-libp2p/issues/2032) without additional configuration options: As soon as an address is reported as publicly reachable, we can activate server-mode for that connection.
Related: https://github.com/libp2p/rust-libp2p/pull/3877.
Related: https://github.com/libp2p/rust-libp2p/issues/3953.
Related: https://github.com/libp2p/rust-libp2p/issues/2032.
Related: https://github.com/libp2p/go-libp2p/issues/2229.
Co-authored-by: Max Inden <mail@max-inden.de>
Pull-Request: #3954.
Previously, the associated types on `NetworkBehaviour` and `ConnectionHandler` carried generic names like `InEvent` and `OutEvent`. These names are _correct_ in that `OutEvent`s are passed out and `InEvent`s are passed in but they don't help users understand how these types are used.
In theory, a `ConnectionHandler` could be used separately from `NetworkBehaviour`s but that is highly unlikely. Thus, we rename these associated types to indicate, where the message is going to be sent to:
- `NetworkBehaviour::OutEvent` is renamed to `ToSwarm`: It describes the message(s) a `NetworkBehaviour` can emit to the `Swarm`. The user is going to receive those in `SwarmEvent::Behaviour`.
- `ConnectionHandler::InEvent` is renamed to `FromBehaviour`: It describes the message(s) a `ConnectionHandler` can receive from its behaviour via `ConnectionHandler::on_swarm_event`. The `NetworkBehaviour` can send it via the `ToSwarm::NotifyHandler` command.
- `ConnectionHandler::OutEvent` is renamed to `ToBehaviour`: It describes the message(s) a `ConnectionHandler` can send back to the behaviour via the now also renamed `ConnectionHandlerEvent::NotifyBehaviour` (previously `ConnectionHandlerEvent::Custom`)
Resolves: #2854.
Pull-Request: #3848.
Previously, a protocol could be any sequence of bytes as long as it started with `/`. Now, we directly parse a protocol as `String` which enforces it to be valid UTF8.
To notify users of this change, we delete the `ProtocolName` trait. The new requirement is that users need to provide a type that implements `AsRef<str>`.
We also add a `StreamProtocol` newtype in `libp2p-swarm` which provides an easy way for users to ensure their protocol strings are compliant. The newtype enforces that protocol strings start with `/`. `StreamProtocol` also implements `AsRef<str>`, meaning users can directly use it in their upgrades.
`multistream-select` by itself only changes marginally with this patch. The only thing we enforce in the type-system is that protocols must implement `AsRef<str>`.
Resolves: #2831.
Pull-Request: #3746.
Previously, we would specify the version and path of our workspace dependencies in each of our crates. This is error prone as https://github.com/libp2p/rust-libp2p/pull/3658#discussion_r1153278072 for example shows. Problems like these happened in the past too.
There is no need for us to ever depend on a earlier version than the most current one in our crates. It thus makes sense that we manage this version in a single place.
Cargo supports a feature called "workspace inheritance" which allows us to share a dependency declaration across a workspace and inherit it with `{ workspace = true }`.
We do this for all our workspace dependencies and for the MSRV.
Resolves#3787.
Pull-Request: #3715.
The `unreachable_pub` lint makes us aware of uses of `pub` that are not actually reachable from the crate root. This is considered good because it means reading a `pub` somewhere means it is actually public API. Some of our crates are quite large and keeping their entire API surface in your head is difficult.
We should strive for most items being `pub(crate)`. This lint helps us enforce that.
Pull-Request: #3735.
With https://github.com/libp2p/rust-libp2p/pull/3658, these crates depend on the `0.42.1` release to access the new `ToSwarm` type. With the currently specified version, a user could theoretically run into a compile error if they pin `libp2p-swarm` to `0.42.0` in their lockfile but update to the latest patch release of one of these crates.
Pull-Request: #3711.
Instead of relying on `protoc` and buildscripts, we generate the bindings using `pb-rs` and version them within our codebase. This makes for a better IDE integration, a faster build and an easier use of `rust-libp2p` because we don't force the `protoc` dependency onto them.
Resolves#3024.
Pull-Request: #3312.
A large release with lots of changes I am looking forward to. Sorry for the long release cadence.
Anything folks would like to see included that is not yet in `master`? As usual I would like to only block on bug fixes.
Pull-Request: #3491.
Previously, a `ConnectionHandler` was immediately requested from the `NetworkBehaviour` as soon as a new dial was initiated or a new incoming connection accepted.
With this patch, we delay the creation of the handler until the connection is actually established and fully upgraded, i.e authenticated and multiplexed.
As a consequence, `NetworkBehaviour::new_handler` is now deprecated in favor of a new set of callbacks:
- `NetworkBehaviour::handle_pending_inbound_connection`
- `NetworkBehaviour::handle_pending_outbound_connection`
- `NetworkBehaviour::handle_established_inbound_connection`
- `NetworkBehaviour::handle_established_outbound_connection`
All callbacks are fallible, allowing the `NetworkBehaviour` to abort the connection either immediately or after it is fully established. All callbacks also receive a `ConnectionId` parameter which uniquely identifies the connection. For example, in case a `NetworkBehaviour` issues a dial via `NetworkBehaviourAction::Dial`, it can unambiguously detect this dial in these lifecycle callbacks via the `ConnectionId`.
Finally, `NetworkBehaviour::handle_pending_outbound_connection` also replaces `NetworkBehaviour::addresses_of_peer` by allowing the behaviour to return more addresses to be used for the dial.
Resolves#2824.
Pull-Request: #3254.
We create the `ConnectionId` for the new connection as part of `DialOpts`. This allows `NetworkBehaviour`s to accurately track state regarding their own dial attempts.
This patch is the main enabler of https://github.com/libp2p/rust-libp2p/pull/3254. Removing the `handler` field will allow us to deprecate the `NetworkBehaviour::new_handler` function in favor of four new ones that give more control over the connection lifecycle.
Previously, we used the full reference to the `OutEvent` of the `ConnectionHandler` in all implementations of `NetworkBehaviour`. Not only is this very verbose, it is also more brittle to changes. With the current implementation plan for #2824, we will be removing the `IntoConnectionHandler` abstraction. Using a type-alias to refer to the `OutEvent` makes the migration much easier.
This patch addresses #2500 for the `libp2p-floodsub` crate.
For this PR the existing code was upgraded to use `Framed` with the `prost_codec::Codec` as the standard codec for handling the RPC message format serialization/deserialization.
We refactor our continuous integration workflow with the following goals in mind:
- Run as few jobs as possible
- Have the jobs finish as fast as possible
- Have the jobs redo as little work as possible
There are only so many jobs that GitHub Actions will run in parallel.
Thus, it makes sense to not create massive matrices but instead group
things together meaningfully.
The new `test` job will:
- Run once for each crate
- Ensure that the crate compiles on its specified MSRV
- Ensure that the tests pass
- Ensure that there are no semver violations
This is an improvement to before because we are running all of these
in parallel which speeds up execution and highlights more errors at
once. Previously, tests run later in the pipeline would not get run
at all until you make sure the "first" one passes.
We also previously did not verify the MSRV of each crate, making the
setting in the `Cargo.toml` rather pointless.
The new `cross` job supersedes the existing `wasm` job.
This is an improvement because we now also compile the crate for
windows and MacOS. Something that wasn't checked before.
We assume that checking MSRV and the tests under Linux is good enough.
Hence, this job only checks for compile-errors.
The new `feature_matrix` ensures we compile correctly with certain feature combinations.
`libp2p` exposes a fair few feature-flags. Some of the combinations
are worth checking independently. For the moment, this concerns only
the executor related transports together with the executor flags but
this list can easily be extended.
The new `clippy` job runs for `stable` and `beta` rust.
Clippy gets continuously extended with new lints. Up until now, we would only
learn about those as soon as a new version of Rust is released and CI would
run the new lints. This leads to unrelated failures in CI. Running clippy on with `beta`
Rust gives us a heads-up of 6 weeks before these lints land on stable.
Fixes#2951.
Remove default features. You need to enable required features
explicitly now. As a quick workaround, you may want to use the
new `full` feature which activates all features.
Instead of having a mix of `poll_event`, `poll_outbound` and `poll_close`, we
flatten the entire interface of `StreamMuxer` into 4 individual functions:
- `poll_inbound`
- `poll_outbound`
- `poll_address_change`
- `poll_close`
This design is closer to the design of other async traits like `AsyncRead` and
`AsyncWrite`. It also allows us to delete the `StreamMuxerEvent`.
Previously `libp2p-swarm` required a `Transport` to be `Clone`. Methods
on `Transport`, e.g. `Transport::dial` would take ownership, requiring
e.g. a `Clone::clone` before calling `Transport::dial`.
The requirement of `Transport` to be `Clone` is no longer needed in
`libp2p-swarm`. E.g. concurrent dialing can be done without a clone per
dial.
This commit removes the requirement of `Clone` for `Transport` in
`libp2p-swarm`. As a follow-up methods on `Transport` no longer take
ownership, but instead a mutable reference (`&mut self`).
On the one hand this simplifies `libp2p-swarm`, on the other it
simplifies implementations of `Transport`.
* build(deps): Update prost-build requirement from 0.9 to 0.10
Updates the requirements on [prost-build](https://github.com/tokio-rs/prost) to permit the latest version.
- [Release notes](https://github.com/tokio-rs/prost/releases)
- [Commits](https://github.com/tokio-rs/prost/commits)
---
updated-dependencies:
- dependency-name: prost-build
dependency-type: direct:production
...
Signed-off-by: dependabot[bot] <support@github.com>
* .github/workflow: Don't run integration test in container
* .github/workflow: Don't run doc step in container
* .github/workflows: Remove component docs
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Max Inden <mail@max-inden.de>
