Without a limit, one can send malformed input such that seq.size_hint() returns
a very large value and crashes the program even if the following data is pretty
small.
Treat EOF error as [`NegotiationError::Failed`], not as
[`NegotiationError::ProtocolError`], allowing dropping or closing an I/O stream
as a permissible way to "gracefully" fail a negotiation.
This is e.g. important when a listener rejects a protocol with
[`Message::NotAvailable`] and the dialer does not have alternative protocols to
propose. Then the dialer will stop the negotiation and drop the corresponding
stream. As a listener this EOF should be interpreted as a failed negotiation.
* [multistream-select] Temp. disable "parallel" negotiation.
In order to later change the "ls" responses for spec-compliance.
* Update version.
* Update misc/multistream-select/CHANGELOG.md
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Max Inden <mail@max-inden.de>
* [multistream-select] Fix panic with V1Lazy and add integration tests.
Fixes a panic when using the `V1Lazy` negotiation protocol,
a regression introduced in https://github.com/libp2p/rust-libp2p/pull/1484.
Thereby adds integration tests for a transport upgrade with both
`V1` and `V1Lazy` to the `multistream-select` crate to prevent
future regressions.
* Cleanup.
* Update changelog.
* Require remaining negotiation data to be flushed.
There appears to still be an edge-case whereby the
`remaining` data to send w.r.t. protocol negotiation to send
is successfully written before a `poll_read` on a `Negotiated` stream,
but where the subsequent `poll_flush()` is pending.
Now `remaining` is empty and the next `poll_read()`
will go straight to reading from the underlying
I/O stream, despite the flush not having happened
yet, which can lead to a form of deadlock during
protocol negotiation.
Rather than complicating the existing code further in
order to accommodate for this case, it seems preferable
to simplify the code by giving up on this optimisation
that only affects the last negotiation protocol message
sent by the "listener". So we give up on the ability
to combine data sent by the "listener" immediately
after protocol negotiation together with the final
negotiation frame in the same transport-level frame/packet.
* Update changelog.
* Add missing comma.
* core-derive: use full qualified name when polling NetworkBehaviour
If the users define a custom poll method also named in `poll` like
`#[behaviour(poll_method = "poll")`, it will cause issues as the wrong
`poll` method being called.
So use full qualified name to avoid ambiguity.
Fixes#1679.
* Update changelog for patch release.
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Roman S. Borschel <roman@parity.io>
* Allow users to opt-out of the NetworkBehaviourEventProcess mechanism
* Add CHANGELOG entry
* Prepare release.
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
Co-authored-by: Roman S. Borschel <roman@parity.io>
* Allow StreamMuxer to notify changes in the address
* Fix doc link
* Revert accidental rename
* Other accidental rename
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
* Add /dns protocol support to multiaddr
The /dns protocol has been added to the spec and has had a de-facto
meaning for years.
See https://github.com/multiformats/multiaddr/pull/100
This adds address parsing and encoding support for /dns to the multiaddr
format library.
* Cover Dns protocol in multiaddr property tests
* transports/dns: Support the /dns protocol
* Support /dns protocol in address translation
* Translate an FQDN URL into a /dns multiaddr
* transports/websocket: Support /dns multiaddr
* Use the /dns protocol in websocket redirects
The whole thing with back-translating from an redirect URL looks a bit
baroque, but at least now the transport does not completely ignore IPv6
addresses resolved from a hostname in a redirect URL.
* Add CHANGELOG entry
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
Macro was using field_n (field index including ignored fields) for calculations instad of
enum_n (field index excluding ignored fields). When calculating te nesting the calculation
was made between the number of non-ignored fields and a field_n that lead to and overflow.
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Disambiguate calls to NetworkBehaviour::inject_event
There is a gnarly edge-case with the custom-derive where rustc
cannot disambiguate the call if:
- The NetworkBehaviourEventProcess trait is imported
- We nest NetworkBehaviours that use the custom-derive
* Update misc/core-derive/src/lib.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Fix build and add CHANGELOG
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Pass the error to inject_listener_closed method
If there is an error when the listener closes, found in the
`NetworkEvent::ListenerClosed` `reason` field, we would like to pass it
on to the `inject_listener_closed()` method so that implementors of this
method have access to it.
Add an error parameter to `inject_listener_closed`. Convert the
`reason` field from a `Result` to an `Option` and if there is an error
pass `Some(error)` at the method call site.
* Pass 'reason' as a Result
* Finish change
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* [libp2p-swarm] Make the multiple connections per peer first-class.
This commit makes the notion of multiple connections per peer
first-class in the API of libp2p-swarm, introducing the new
callbacks `inject_connection_established` and
`inject_connection_closed`. The `endpoint` parameter from
`inject_connected` and `inject_disconnected` is removed,
since the first connection to open may not be the last
connection to close, i.e. it cannot be guaranteed,
as was previously the case, that the endpoints passed
to these callbacks match up.
* Have identify track all addresses.
So that identify requests can be answered with the correct
observed address of the connection on which the request
arrives.
* Cleanup
* Cleanup
* Improve the `Peer` state API.
* Remove connection ID from `SwarmEvent::Dialing`.
* Mark `DialPeerCondition` non-exhaustive.
* Re-encapsulate `NetworkConfig`.
To retain the possibility of not re-exposing all
network configuration choices, thereby providing
a more convenient API on the \`SwarmBuilder\`.
* Rework Swarm::dial API.
* Update CHANGELOG.
* Doc formatting tweaks.
* Allow multiple connections per peer in libp2p-core.
Instead of trying to enforce a single connection per peer,
which involves quite a bit of additional complexity e.g.
to prioritise simultaneously opened connections and can
have other undesirable consequences [1], we now
make multiple connections per peer a feature.
The gist of these changes is as follows:
The concept of a "node" with an implicit 1-1 correspondence
to a connection has been replaced with the "first-class"
concept of a "connection". The code from `src/nodes` has moved
(with varying degrees of modification) to `src/connection`.
A `HandledNode` has become a `Connection`, a `NodeHandler` a
`ConnectionHandler`, the `CollectionStream` was the basis for
the new `connection::Pool`, and so forth.
Conceptually, a `Network` contains a `connection::Pool` which
in turn internally employs the `connection::Manager` for
handling the background `connection::manager::Task`s, one
per connection, as before. These are all considered implementation
details. On the public API, `Peer`s are managed as before through
the `Network`, except now the API has changed with the shift of focus
to (potentially multiple) connections per peer. The `NetworkEvent`s have
accordingly also undergone changes.
The Swarm APIs remain largely unchanged, except for the fact that
`inject_replaced` is no longer called. It may now practically happen
that multiple `ProtocolsHandler`s are associated with a single
`NetworkBehaviour`, one per connection. If implementations of
`NetworkBehaviour` rely somehow on communicating with exactly
one `ProtocolsHandler`, this may cause issues, but it is unlikely.
[1]: https://github.com/paritytech/substrate/issues/4272
* Fix intra-rustdoc links.
* Update core/src/connection/pool.rs
Co-Authored-By: Max Inden <mail@max-inden.de>
* Address some review feedback and fix doc links.
* Allow responses to be sent on the same connection.
* Remove unnecessary remainders of inject_replaced.
* Update swarm/src/behaviour.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update swarm/src/lib.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update core/src/connection/manager.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update core/src/connection/manager.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Update core/src/connection/pool.rs
Co-Authored-By: Pierre Krieger <pierre.krieger1708@gmail.com>
* Incorporate more review feedback.
* Move module declaration below imports.
* Update core/src/connection/manager.rs
Co-Authored-By: Toralf Wittner <tw@dtex.org>
* Update core/src/connection/manager.rs
Co-Authored-By: Toralf Wittner <tw@dtex.org>
* Simplify as per review.
* Fix rustoc link.
* Add try_notify_handler and simplify.
* Relocate DialingConnection and DialingAttempt.
For better visibility constraints.
* Small cleanup.
* Small cleanup. More robust EstablishedConnectionIter.
* Clarify semantics of `DialingPeer::connect`.
* Don't call inject_disconnected on InvalidPeerId.
To preserve the previous behavior and ensure calls to
`inject_disconnected` are always paired with calls to
`inject_connected`.
* Provide public ConnectionId constructor.
Mainly needed for testing purposes, e.g. in substrate.
* Move the established connection limit check to the right place.
* Clean up connection error handling.
Separate connection errors into those occuring during
connection setup or upon rejecting a newly established
connection (the `PendingConnectionError`) and those
errors occurring on previously established connections,
i.e. for which a `ConnectionEstablished` event has
been emitted by the connection pool earlier.
* Revert change in log level and clarify an invariant.
* Remove inject_replaced entirely.
* Allow notifying all connection handlers.
Thereby simplify by introducing a new enum `NotifyHandler`,
used with a single constructor `NetworkBehaviourAction::NotifyHandler`.
* Finishing touches.
Small API simplifications and code deduplication.
Some more useful debug logging.
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
Co-authored-by: Toralf Wittner <tw@dtex.org>
