* Integrate use of identity keys into libp2p-noise.
In order to make libp2p-noise usable with a `Swarm`, which requires a
`Transport::Output` that is a pair of a peer ID and an implementation
of `StreamMuxer`, it is necessary to bridge the gap between static
DH public keys and public identity keys from which peer IDs are derived.
Because the DH static keys and the identity keys need not be
related, it is thus generally necessary that the public identity keys are
exchanged as part of the Noise handshake, which the Noise protocol
accomodates for through the use of handshake message payloads.
The implementation of the existing (IK, IX, XX) handshake patterns is thus
changed to send the public identity keys in the handshake payloads.
Additionally, to facilitate the use of any identity keypair with Noise
handshakes, the static DH public keys are signed using the identity
keypairs and the signatures sent alongside the public identity key
in handshake payloads, unless the static DH public key is "linked"
to the public identity key by other means, e.g. when an Ed25519 identity
keypair is (re)used as an X25519 keypair.
* libp2p-noise doesn't build for wasm.
Thus the development transport needs to be still constructed with secio
for transport security when building for wasm.
* Documentation tweaks.
* For consistency, avoid wildcard enum imports.
* For consistency, avoid wildcard enum imports.
* Slightly simplify io:🤝:State::finish.
* Simplify creation of 2-byte arrays.
* Remove unnecessary cast and obey 100 char line limit.
* Update protocols/noise/src/protocol.rs
Co-Authored-By: romanb <romanb@users.noreply.github.com>
* Address more review comments.
* Cosmetics
* Cosmetics
* Give authentic DH keypairs a distinct type.
This has a couple of advantages:
* Signing the DH public key only needs to happen once, before
creating a `NoiseConfig` for an authenticated handshake.
* The identity keypair only needs to be borrowed and can be
dropped if it is not used further outside of the Noise
protocol, since it is no longer needed during Noise handshakes.
* It is explicit in the construction of a `NoiseConfig` for
a handshake pattern, whether it operates with a plain `Keypair`
or a keypair that is authentic w.r.t. a public identity key
and future handshake patterns may be built with either.
* The function signatures for constructing `NoiseConfig`s for
handshake patterns are simplified and a few unnecessary trait
bounds removed.
* Post-merge corrections.
* Add note on experimental status of libp2p-noise.
Although not explicitly mentioned in the paper, it seems clear that
including an entry for the requesting peer in a FIND_NODE response
never gives useful information and just occupies a result slot that may
have been better filled with another peer that the requestor may not
know about.
There is one explicit mention that this is the desired behavior
in a somewhat dated design document of another p2p framework [1]:
"The recipient of a FIND_NODE should never return a triple containing
the nodeID of the requestor."
The same reasoning supposedly applies to the libp2p-specific `GET_PROVIDERS`
request.
[1] http://xlattice.sourceforge.net/components/protocol/kademlia/specs.html#FIND_NODE
* Fix self-dialing in Kademlia.
Addresses https://github.com/libp2p/rust-libp2p/issues/341 which is the cause
for one of the observations made in https://github.com/libp2p/rust-libp2p/issues/1053.
However, the latter is not assumed to be fully addressed by these changes and
needs further investigation.
Currently, whenever a search for a key yields a response containing the initiating
peer as one of the closest peers known to the remote, the local node
would attempt to dial itself. That attempt is ignored by the Swarm, but
the Kademlia behaviour now believes it still has a query ongoing which is
always doomed to time out. That timeout delays successful completion of the query.
Hence, any query where a remote responds with the ID of the local node takes at
least as long as the `rpc_timeout` to complete, which possibly affects almost
all queries in smaller clusters where every node knows about every other.
This problem is fixed here by ensuring that Kademlia never tries to dial the local node.
Furthermore, `Discovered` events are no longer emitted for the local node
and it is not inserted into the `untrusted_addresses` from discovery, as described
in #341.
This commit also includes a change to the condition for freezing / terminating
a Kademlia query upon receiving a response. Specifically, the condition is
tightened such that it only applies if in addition to `parallelism`
consecutive responses that failed to yield a peer closer to the target, the
last response must also either not have reported any new peer or the
number of collected peers has already reached the number of desired results.
In effect, a Kademlia query now tries harder to actually return `k`
closest peers.
Tests have been refactored and expanded.
* Add another comment.
* muxing: adds an error type to streammuxer
* Update examples/chat.rs
Co-Authored-By: montekki <fedor.sakharov@gmail.com>
* make the trait error type bound to io error
* Add wasm-ext-transport
* Fix paths
* Adjust listen_on to return an Iterator
* Adjust read() to produce Iterator
* Remove map_err when possible
* Cargo fmt
* Adjust errors as well
* Small comment fix
* Revert "Adjust errors as well"
This reverts commit 97eb5149dafeaca9910a2809ee47e6d332ce1cb1.
* More dev on Debug
* Differentiate based on error
This is now a very simple option serving multiple purposes:
* It allows for stable (integration) tests involving a Swarm, which
are otherwise subject to race conditions due to the connection being
allowed to terminate at any time with `KeepAlive::No`
(which remains the default).
* It makes for a more entertaining ping example which continuously
sends pings.
* Maybe someone wants to use the ping protocol for application-layer
connection keep-alive after all.
* Bump to 0.7.0
* Update CHANGELOG.md
Co-Authored-By: tomaka <pierre.krieger1708@gmail.com>
* Update for #1078
* New version of multihash and multiaddr as well
* Small addendum to #1072.
* Missed two review comments related to documentation.
* Avoid creating new `Delay`s when possible, i.e. when the deadline
did not change, since they're not exactly cheap and returning
`KeepAlive::Until(t)` with the same instant `t` over a prolonged
period of time is common.
* Even better.
* Fix connection & handler shutdown when using `KeepAlive::Now`.
Delay::new(Instant::now()) is never immediately ready, resulting in
`KeepAlive::Now` to have no effect, since the delay is re-created on
every execution of `poll()` in the `NodeHandlerWrapper`. It can also
send the node handler into a busy-loop, since every newly
created Delay will trigger a task wakeup, which creates a new Delay
with Instant::now(), and so forth.
The use of `Delay::new(Instant::now())` for "immediate" connection shutdown
is therefore removed here entirely. An important assumption is thereby
that as long as the node handler non-empty `negotiating_in` and `negotiating_out`,
the handler is not dependent on such a Delay for task wakeup.
* Correction to the libp2p-ping connection timeout.
The current connection timeout is always short of one `interval`,
because the "countdown" begins with the last received or sent pong
(depending on the policy). In effect, the current default config has
a connection timeout of 5 seconds (20 - 15) from the point when a ping is sent.
Instead, the "countdown" of the connection timeout should always begin
with the next scheduled ping. That also makes all configurations valid,
avoiding pitfalls.
The important properties of the ping handler are now checked to hold for all
configurations, in particular:
* The next ping must be scheduled no earlier than the ping interval
and no later than the connection timeout.
* The "countdown" for the connection timeout starts on the next ping,
i.e. the full connection timeout remains at the instant when the
next ping is sent.
* Do not keep connections alive.
The ping protocol is not supposed to keep otherwise idle connections
alive, only to add an additional condition for terminating them in
the form of a configurable number of consecutive failed ping requests.
In this context, the `PingPolicy` does not seem useful any longer.
* Fix connection & handler shutdown when using `KeepAlive::Now`.
Delay::new(Instant::now()) is never immediately ready, resulting in
`KeepAlive::Now` to have no effect, since the delay is re-created on
every execution of `poll()` in the `NodeHandlerWrapper`. It can also
send the node handler into a busy-loop, since every newly
created Delay will trigger a task wakeup, which creates a new Delay
with Instant::now(), and so forth.
The use of `Delay::new(Instant::now())` for "immediate" connection shutdown
is therefore removed here entirely. An important assumption is thereby
that as long as the node handler non-empty `negotiating_in` and `negotiating_out`,
the handler is not dependent on such a Delay for task wakeup.
* Trigger CI.
The current implementation does not properly reserve enough space for
`Write::write_all` to succeed. The property test has been improved to
trigger that issue.
The functionality is available through `Multiaddr::replace`.
What we currently call "nat_traversal" is merley a replacement of an IP
address prefix in a `Multiaddr`, hence it can be done directly on
`Multiaddr` values instead of having to go through a `Transport`.
In addition this PR consolidates changes made to `Multiaddr` in
previous commits which resulted in lots of deprecations. It adds some
more (see below for the complete list of API changes) and removes all
deprecated functionality, requiring a minor version bump.
Here are the changes to `multiaddr` compared to the currently published
version:
1. Removed `into_bytes` (use `to_vec` instead).
2. Renamed `to_bytes` to `to_vec`.
3. Removed `from_bytes` (use the `TryFrom` impl instead).
4. Added `with_capacity`.
5. Added `len`.
6. Removed `as_slice` (use `AsRef` impl instead).
7. Removed `encapsulate` (use `push` or `with` instead).
8. Removed `decapsulate` (use `pop` instead).
9. Renamed `append` to `push`.
10. Added `with`.
11. Added `replace`.
12. Removed `ToMultiaddr` trait (use `TryFrom` instead).
* libp2p-ping improvements.
* re #950: Removes use of the `OneShotHandler`, but still sending each
ping over a new substream, as seems to be intentional since #828.
* re #842: Adds an integration test that exercises the ping behaviour through
a Swarm, requiring the RTT to be below a threshold. This requires disabling
Nagle's algorithm as it can interact badly with delayed ACKs (and has been
observed to do so in the context of the new ping example and integration test).
* re #864: Control of the inbound and outbound (sub)stream protocol upgrade
timeouts has been moved from the `NodeHandlerWrapperBuilder` to the
`ProtocolsHandler`. That may also alleviate the need for a custom timeout
on an `OutboundSubstreamRequest` as a `ProtocolsHandler` is now free to
adjust these timeouts over time.
Other changes:
* A new ping example.
* Documentation improvements.
* More documentation improvements.
* Add PingPolicy and ensure no event is dropped.
* Remove inbound_timeout/outbound_timeout.
As per review comment, the inbound timeout is now configured
as part of the `listen_protocol` and the outbound timeout as
part of the `OutboundSubstreamRequest`.
* Simplify and generalise.
Generalise `ListenProtocol` to `SubstreamProtocol`, reusing it in
the context of `ProtocolsHandlerEvent::OutboundSubstreamRequest`.
* Doc comments for SubstreamProtocol.
* Adapt to changes in master.
* Relax upper bound for ping integration test rtt.
For "slow" CI build machines?
Wildcard IP addresses (e.g. 0.0.0.0) are used to listen on all host
interfaces. To report those addresses such that clients know about them
and can actually make use of them we use the `get_if_addrs` crate and
maintain a collection of addresses. We report the whole expansion at the
very beginning of the listener stream with `ListenerEvent::NewAddress`
events and add new addresses should they come to our attention.
What remains to be done is to potentially allow users to filter IP
addresses, for example the local loopback one, and to detect expired
addresses not only if a new address is discovered.
Replace the listener and address pair returned from `Transport::listen_on` with just a listener that produces `ListenerEvent` values which include upgrades as well as address changes.
