Check multiaddr has valid peer id component or none at all. We don't want to
cache a multiaddr with a purposely wrong multiaddr. e.g. something that ends
with .../p2p/some-other-peer. While this should fail to dial because we [check
this before
dialing](https://github.com/libp2p/rust-libp2p/blob/master/core/src/connection/pool/concurrent_dial.rs#L144),
it's better to not cache this in the first place.
Enable advanced dialing requests both on `Swarm` and via
`NetworkBehaviourAction`. Users can now trigger a dial with a specific
set of addresses, optionally extended via
`NetworkBehaviour::addresses_of_peer`. In addition the whole process is
now modelled in a type safe way via the builder pattern.
Example of a `NetworkBehaviour` requesting a dial to a specific peer
with a set of addresses additionally extended through
`NetworkBehaviour::addresses_of_peer`:
```rust
NetworkBehaviourAction::Dial {
opts: DialOpts::peer_id(peer_id)
.condition(PeerCondition::Always)
.addresses(addresses)
.extend_addresses_through_behaviour()
.build(),
handler,
}
```
Example of a user requesting a dial to an unknown peer with a single
address via `Swarm`:
```rust
swarm1.dial(
DialOpts::unknown_peer_id()
.address(addr2.clone())
.build()
)
```
Changes needed to get libp2p to run via `wasm32-unknown-unknown` in the browser
(both main thread and inside web workers).
Replaces wasm-timer with futures-timer and instant.
Co-authored-by: Oliver Wangler <oliver@wngr.de>
Concurrently dial address candidates within a single dial attempt.
Main motivation for this feature is to increase success rate on hole punching
(see https://github.com/libp2p/rust-libp2p/issues/1896#issuecomment-885894496
for details). Though, as a nice side effect, as one would expect, it does
improve connection establishment time.
Cleanups and fixes done along the way:
- Merge `pool.rs` and `manager.rs`.
- Instead of manually implementing state machines in `task.rs` use
`async/await`.
- Fix bug where `NetworkBehaviour::inject_connection_closed` is called without a
previous `NetworkBehaviour::inject_connection_established` (see
https://github.com/libp2p/rust-libp2p/issues/2242).
- Return handler to behaviour on incoming connection limit error. Missed in
https://github.com/libp2p/rust-libp2p/issues/2242.
Implement the libp2p rendezvous protocol.
> A lightweight mechanism for generalized peer discovery. It can be used for
bootstrap purposes, real time peer discovery, application specific routing, and
so on.
Co-authored-by: rishflab <rishflab@hotmail.com>
Co-authored-by: Daniel Karzel <daniel@comit.network>
Require `NetworkBehaviourAction::{DialPeer,DialAddress}` to contain a
`ProtocolsHandler`. This allows a behaviour to attach custom state to its
handler. The behaviour would no longer need to track this state separately
during connection establishment, thus reducing state required in a behaviour.
E.g. in the case of `libp2p-kad` the behaviour can include a `GetRecord` request
in its handler, or e.g. in the case of `libp2p-request-response` the behaviour
can include the first request in the handler.
Return `ProtocolsHandler` on connection error and close. This allows a behaviour
to extract its custom state previously included in the handler on connection
failure and connection closing. E.g. in the case of `libp2p-kad` the behaviour
could extract the attached `GetRecord` from the handler of the failed connection
and then start another connection attempt with a new handler with the same
`GetRecord` or bubble up an error to the user.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Not all implementations of `NetworkBehaviour` need all callbacks.
We've have been adding new callbacks with default implementations
for a while now. There is no reason the initial ones cannot also
be defaulted, thus making it easier create new implementations.
Co-authored-by: Max Inden <mail@max-inden.de>
- Change `PublicKey::into_protobuf_encoding` to
`PublicKey::to_protobuf_encoding`.
- Change `PublicKey::into_peer_id` to `PublicKey::to_peer_id`.
- Change `PeerId::from_public_key(PublicKey)` to
`PeerId::from_public_key(&PublicKey)`.
- Add `From<&PublicKey> for PeerId`.
Co-authored-by: Max Inden <mail@max-inden.de>
* Fix needless question mark operator
* Don't convert from u64 to u64
LocalStreamId is already a u64, no need to convert.
* Don't use `.into()` to convert to the same type
* Don't specify lifetime if it can be inferred
* Use `vec!` macro if we immediately push to it
This creates the vector with the appropriate capacity.
* Don't index array when taking a reference is enough
Co-authored-by: Max Inden <mail@max-inden.de>
1. Deprecating the `write_one` function
Semantically, this function is a composition of `write_with_len_prefix` and
`io.close()`. This represents a footgun because the `close` functionality is
not obvious and only mentioned in the docs. Using this function multiple times
on a single substream will produces hard to debug behaviour.
2. Deprecating `read_one` and `write_with_len_prefix` functions
3. Introducing `write_length_prefixed` and `read_length_prefixed`
- These functions are symmetric and do exactly what you would expect, just
writing to the socket without closing
- They also have a symmetric interface (no more custom errors, just `io::Error`)
Co-authored-by: Max Inden <mail@max-inden.de>
Change `Stream` implementation of `ExpandedSwarm` to return all
`SwarmEvents` instead of only the `NetworkBehaviour`'s events.
Remove `ExpandedSwarm::next_event`. Users can use `<ExpandedSwarm as
StreamExt>::next` instead.
Remove `ExpandedSwarm::next`. Users can use `<ExpandedSwarm as
StreamExt>::filter_map` instead.
Remove `Deref` and `DerefMut` implementations previously dereferencing
to the `NetworkBehaviour` on `Swarm`. Instead one can access the
`NetworkBehaviour` via `Swarm::behaviour` and `Swarm::behaviour_mut`.
Methods on `Swarm` can now be accessed directly, e.g. via
`my_swarm.local_peer_id()`.
Reasoning: Accessing the `NetworkBehaviour` of a `Swarm` through `Deref`
and `DerefMut` instead of a method call is an unnecessary complication,
especially for newcomers. In addition, `Swarm` is not a smart-pointer
and should thus not make use of `Deref` and `DerefMut`, see documentation
from the standard library below.
> Deref should only be implemented for smart pointers to avoid
confusion.
https://doc.rust-lang.org/std/ops/trait.Deref.html
* Implement /ipfs/id/push/1.0.0 alongside some refactoring.
* Implement /ipfs/id/push/1.0.0, i.e. the ability to actively
push information of the local peer to specific remotes.
* Make the initial delay as well as the recurring delay
for the periodic identification requests configurable,
introducing `IdentifyConfig`.
* Fix test.
* Fix example.
* Update protocols/identify/src/identify.rs
Co-authored-by: Max Inden <mail@max-inden.de>
* Update protocols/identify/src/identify.rs
Co-authored-by: Max Inden <mail@max-inden.de>
* Update versions and changelogs.
Co-authored-by: Max Inden <mail@max-inden.de>
* Implement `/dnsaddr` support on `libp2p-dns`.
To that end, since resolving `/dnsaddr` addresses needs
"fully qualified" multiaddresses when dialing, i.e. those
that end with the `/p2p/...` protocol, we make sure that
dialing always uses such fully qualified addresses by
appending the `/p2p` protocol as necessary. As a side-effect,
this adds support for dialing peers via "fully qualified"
addresses, as an alternative to using a `PeerId` together
with a `Multiaddr` with or without the `/p2p` protocol.
* Adapt libp2p-relay.
* Update versions, changelogs and small cleanups.
* Remove substream-specific protocol negotiation version.
Remove the option for a substream-specific multistream select protocol override.
The override at this granularity is no longer deemed useful, in particular because
it can usually not be configured for existing protocols like `libp2p-kad` and others.
There is a `Swarm`-scoped configuration for this version available since
[1858](https://github.com/libp2p/rust-libp2p/pull/1858).
* Update protocol crate versions and changelogs.
* Clean up documentation.
* Make clippy "happy".
Address all clippy complaints that are not purely stylistic (or even
have corner cases with false positives). Ignore all "style" and "pedantic" lints.
* Fix tests.
* Undo unnecessary API change.
Move transport upgrade protocols from `protocols/`
to `transports/`, such that only "application protocols"
that depend on `libp2p-swarm` remain in `protocols/`,
whereas there is no such dependency in `transports/`
outside of integration tests.
Tweak README and top-level CHANGELOG.
* Update tomls.
* Let transports decide when to translate.
* Improve tcp transport.
* Update stuff.
* Remove background task. Enhance documentation.
To avoid spawning a background task and thread within
`TcpConfig::new()`, with communication via unbounded channels,
a `TcpConfig` now keeps track of the listening addresses
for port reuse in an `Arc<RwLock>`. Furthermore, an `IfWatcher`
is only used by a `TcpListenStream` if it listens on any interface
and directly polls the `IfWatcher` both for initialisation and
new events.
Includes some documentation and test enhancements.
* Reintroduce feature flags for tokio vs async-io.
To avoid having an extra reactor thread running for tokio
users and to make sure all TCP I/O uses the mio-based
tokio reactor.
Thereby run tests with both backends.
* Add missing files.
* Fix docsrs attributes.
* Update transports/tcp/src/lib.rs
Co-authored-by: Max Inden <mail@max-inden.de>
* Restore chat-tokio example.
* Forward poll_write_vectored for tokio's AsyncWrite.
* Update changelogs.
Co-authored-by: David Craven <david@craven.ch>
Co-authored-by: Max Inden <mail@max-inden.de>
`futures-codec` has not been updated in the recent months. It still
depends on `bytes` `v0.5` preventing all downstream dependencies to
upgrade to `bytes` `v1.0`.
This commit replaces `futures_codec` in favor of `asynchronous-codec`
The latter is a fully upgraded fork of the former.
In addition this commit upgrades:
- bytes to v1
- unsigned-varint to v0.6.0
- prost to v0.7
* Add "infinite" scores for external addresses.
Extend address scores with an infinite cardinal, permitting
addresses to be retained "forever" or until explicitly removed.
Expose (external) address scores on the API.
* Update swarm/src/registry.rs
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Fix compilation.
* Update CHANGELOG
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* feat: upgrade to multihash 0.13
`multihash` changes a lot internally, it is using stack allocation instead
of heap allocation. This leads to a few limitations in regards on how
`Multihash` can be used.
Therefore `PeerId` is now using a `Bytes` internally so that only minimal
changes are needed.
* Update versions and changelogs.
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
Co-authored-by: Roman S. Borschel <roman@parity.io>
