* Add debug instances for MessageCache and GossipSub behaviour
* Manual impl of Debug for GossipsubMessage
* Add pretty printing of protocol_id in debug
* Use hex_fmt instead of hex
* Inline StringOrBytes helper struct
Since it is used only once here
* Limit data of gossipsub msg to 20 bytes
Otherwise they might become very large and useless for debugging
* core-derive: use full qualified name when polling NetworkBehaviour
If the users define a custom poll method also named in `poll` like
`#[behaviour(poll_method = "poll")`, it will cause issues as the wrong
`poll` method being called.
So use full qualified name to avoid ambiguity.
Fixes#1679.
* Update changelog for patch release.
Co-authored-by: Max Inden <mail@max-inden.de>
Co-authored-by: Roman S. Borschel <roman@parity.io>
* Refactor the bandwidth logging to be less magic
* Apply suggestions from code review
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
* Complete renaming.
* Update changelog.
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
Co-authored-by: Roman S. Borschel <roman@parity.io>
* Support spec-compliant reading of noise handshake payloads.
See https://github.com/libp2p/rust-libp2p/issues/1631.
This the first of a three-step process to addressing the issue.
In this step, support for reading noise handshake payloads
without an additional length prefix is added, falling back
to attempting a decoding with length prefix on failure.
Length prefixes are still sent in this step. Hence
interoperability with other libp2p implementations is not
yet achieved after with step.
To achieve a better separation of handshake and transport
I/O, the `NoiseFramed` type has been extracted from
`NoiseOutput`. `NoiseFramed` is a `Sink` and `Stream`
of length-delimited Noise protocol messages. This type
is used in the handshake phase. Once a handshake
completes the underlying Noise session transitions to
transport mode and the `NoiseFramed` is wrapped in
the `NoiseOutput` which provides a regular `AsyncRead`
/ `AsyncWrite` I/O resource on top of the framed
encoding. No new buffers are introduced, they are
just split between `NoiseFramed` and `NoiseOutput`.
The second step involves removing the sending of the
length prefix in a subsequent release.
The third step involves removing the support for reading
length-prefixed protobuf payloads.
* Small cleanup.
* Reuse frame decryption buffer.
Since frames are consumed one-by-one, `NoiseFramed` can have
a `BytesMut` decryption buffer, handing out immutable `Bytes`
views for each decrypted message. Since each view gets fully
consumed and dropped before the next frame is read, the
`BytesMut` decryption buffer in `NoiseFramed` can always
reuse the same buffer, only growing it as necessary.
* Simplify.
* Add missing inner poll_flush().
* Improve nested length detection.
* Avoid unnecessary clearing of send buffers.
Thus reducing the necessary zeroing of send buffers on resize,
as per the previous behaviour.
* Prepare release.
* Close substream after writing request/response.
* Update protocols/request-response/src/handler/protocol.rs
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
* Update rustls dependency.
* Bump async-tls lower bound.
* Bump async-tls to 0.8.
0.7.1 has been yanked. Since `libp2p-websockets` exposes
neither `async-tls` nor `rustls` on its API, this can
be a patch release.
* Ignore a node's own addresses on dialing.
Dialing attempts of a local node to one of its own
addresses for what appears to be a different peer
ID are futile and bound to fail with an `InvalidPeerId`
error. To avoid such futile dialing attempts, filter
out the node's own addresses from the addresses
reported by the `NetworkBehaviour` for any peer.
There can be a few reasons why a `NetworkBehaviour` may
think an address belongs to a different peer, e.g.:
1. In the context of e.g. `libp2p-kad`, the local node
may have changed its network identity (e.g. key rotation)
and "discovers" its former identity in the DHT, with the same
address(es).
2. Another peer may erroneously or intentionally, possibly even maliciously,
report one of the local node's addresses as its own, making the node
try to connect to itself.
Relates to https://github.com/paritytech/stakingops-issues/issues/18.
* Remove filtering of external addresses.
Since these are obtained from other peers, it would constitute
an attack vector. It is furthermore usually not possible for
a peer behind a NAT to dial its own external address so these
are unlikely to cause `InvalidPeerId` errors as a result of a
peer dialing itself under the expectation of one of its
former peer IDs.
* Allow users to opt-out of the NetworkBehaviourEventProcess mechanism
* Add CHANGELOG entry
* Prepare release.
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
Co-authored-by: Roman S. Borschel <roman@parity.io>
* Enable tcp-tokio on docs.rs
To have the documentation built for the optional feature,
it has to be enabled in package metadata for docs.rs.
* Document all features on docs.rs
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
* Allow StreamMuxer to notify changes in the address
* Fix doc link
* Revert accidental rename
* Other accidental rename
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
* Add the libp2p-request-response protocol.
This crate provides a generic implementation for request/response
protocols, whereby each request is sent on a new substream.
* Fix OneShotHandler usage in floodsub.
* Custom ProtocolsHandler and multiple protocols.
1. Implement a custom ProtocolsHandler instead of using
the OneShotHandler for better control and error handling.
In particular, all request/response sending/receiving is
kept in the substreams upgrades and thus the background
task of a connection.
2. Support multiple protocols (usually protocol versions)
with a single `RequestResponse` instance, with
configurable inbound/outbound support.
* Small doc clarification.
* Remove unnecessary Sync bounds.
* Remove redundant Clone constraint.
* Update protocols/request-response/Cargo.toml
Co-authored-by: Toralf Wittner <tw@dtex.org>
* Update dev-dependencies.
* Update Cargo.tomls.
* Add changelog.
* Remove Sync bound from RequestResponseCodec::Protocol.
Apparently the compiler just needs some help with the scope
of borrows, which is unfortunate.
* Try async-trait.
* Allow checking whether a ResponseChannel is still open.
Also expand the commentary on `send_response` to indicate that
responses may be discard if they come in too late.
* Add `RequestResponse::is_pending`.
As an analogue of `ResponseChannel::is_open` for outbound requests.
* Revert now unnecessary changes to the OneShotHandler.
Since `libp2p-request-response` is no longer using it.
* Update CHANGELOG for libp2p-swarm.
Co-authored-by: Toralf Wittner <tw@dtex.org>
* More control & insight for k-buckets.
1) More control: It is now possible to disable automatic
insertions of peers into the routing table via a new
`KademliaBucketInserts` configuration option. The
default is `OnConnected`, but it can be set to `Manual`,
in which case `add_address` must be called explicitly.
In order to communicate all situations in which a user
of `Kademlia` may want to manually update the routing
table, two new events are introduced:
* `KademliaEvent::RoutablePeer`: When a connection to
a peer with a known listen address is established
which may be added to the routing table. This is
also emitted when automatic inserts are allowed but
the corresponding k-bucket is full.
* `KademliaEvent::PendingRoutablePeer`: When a connection
to a peer with a known listen address is established
which is pending insertion into the routing table
(but may not make it). This is only emitted when
`OnConnected` (i.e. automatic inserts) are used.
These complement the existing `UnroutablePeer` and
`RoutingUpdated` events. It is now also possible to
explicitly remove peers and addresses from the
routing table.
2) More insight: `Kademlia::kbuckets` now gives an
iterator over `KBucketRef`s and `Kademlia::bucket`
a particular `KBucketRef`. A `KBucketRef` in turn
allows iteration over its entries. In this way,
the full contents of the routing table can be
inspected, e.g. in order to decide which peer(s)
to remove.
* Update protocols/kad/src/behaviour.rs
* Update protocols/kad/src/behaviour.rs
Co-authored-by: Max Inden <mail@max-inden.de>
* Update CHANGELOG.
Co-authored-by: Max Inden <mail@max-inden.de>
- Update `libp2p-kad` CHANGELOG and increment version to 0.20.1.
- Update `libp2p` version to 0.20.1.
- Fix some linter warning in `libp2p-gossipsub` and increment
version to 0.19.3 and update CHANGELOG.
The extension paper S-Kademlia includes a proposal for lookups over
disjoint paths. Within vanilla Kademlia, queries keep track of the
closest nodes in a single bucket. Any adversary along the path can thus
influence all future paths, in case they can come up with the
next-closest (not overall closest) hops. S-Kademlia tries to solve the
attack above by querying over disjoint paths using multiple buckets.
To adjust the libp2p Kademlia implementation accordingly this change-set
introduces an additional peers iterator: `ClosestDisjointPeersIter`.
This new iterator wraps around a set of `ClosestPeersIter`
`ClosestDisjointPeersIter` enforces that each of the `ClosestPeersIter`
explore disjoint paths by having each peer instantly return that was
queried by a different iterator before.
Add rust-ipfs to the list of notable users
Not sure if it is notable enough, but it is open source and looking for contributors, so it would be cool to have it listed here.
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
