* Make the lazy variant interoperable.
The remaining optimisation for `V1Lazy` for a listener
in the negotiation, whereby the listener delays flushing
of the multistream version header, is hereby removed.
The remaining effect of `V1Lazy` is only on the side of
the dialer, which delays flushing of its singular
protocol proposal in order to send it together with
the first application data (or an attempt is made to
read from the negotiated stream, which similarly
triggers a flush of the protocol proposal). This
permits `V1Lazy` dialers to be interoperable with
`V1` listeners. The remaining theoretical pitfall whereby
application data gets misinterpreted as another protocol
proposal by a listener remains, however unlikely.
`V1` remains the default, but we may eventually risk
just making this lazy dialer flush a part of the default
`V1` implementation, removing the dedicated `V1Lazy`
version identifier.
* Update CHANGELOG
* Separate versions from mere header lines.
Every multistream-select version maps to a specific header line,
but there may be different variants of the same multistream-select
version using the same header line, i.e. the same wire protocol.
* Cleanup
* Update misc/multistream-select/CHANGELOG.md
* Add "infinite" scores for external addresses.
Extend address scores with an infinite cardinal, permitting
addresses to be retained "forever" or until explicitly removed.
Expose (external) address scores on the API.
* Update swarm/src/registry.rs
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Fix compilation.
* Update CHANGELOG
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* feat: upgrade to multihash 0.13
`multihash` changes a lot internally, it is using stack allocation instead
of heap allocation. This leads to a few limitations in regards on how
`Multihash` can be used.
Therefore `PeerId` is now using a `Bytes` internally so that only minimal
changes are needed.
* Update versions and changelogs.
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
Co-authored-by: Roman S. Borschel <roman@parity.io>
* Retain remaining read buffer.
When the plaintext protocol handshake finishes and
the `Framed` I/O is discarded in favour of the underlying
I/O stream, the remaining read buffer of `Framed` must
be retained, as it may have buffered data beyond the
end of the handshake.
* Update versions and changelogs.
* Streamline mplex and yamux configurations.
* For all configuration options that exist for both multiplexers
and have the same semantics, use the same names for the
configuration.
* Rename `Config` to `YamuxConfig` for consistentcy with
the majority of other protocols, e.g. `MplexConfig`, `PingConfig`,
`KademliaConfig`, etc.
* Completely hide `yamux` APIs within `libp2p-yamux`. This allows
to fully control the libp2p API and streamline it with other
muxer APIs, consciously choosing e.g. which configuration options
to make configurable in libp2p and which to fix to certain values.
It does also not necessarily prescribe new incompatible version bumps of
yamux for `libp2p-yamux`, as no `yamux` types are exposed. The cost
is some more duplication of configuration options in the API, as well
as the need to update `libp2p-yamux` if `yamux` introduces new
configuration options that `libp2p-yamux` wants to expose as well.
* Update CHANGELOGs.
* Delay routing table update on new connections.
In order to avoid adding peers to the local routing table
which use a different protocol name and thus a different
overlay network, only update the local routing table
for newly established connections once the associated
connection handler reports that the protocol has been
confirmed.
* Update CHANGELOG.
In all cases, we pass the PeerId directly as the connection info.
The flexbility of doing something different here was originally
envisioned but turned out to be never needed.
For reference see: https://github.com/libp2p/rust-libp2p/issues/1798#issuecomment-714526056
Co-authored-by: Max Inden <mail@max-inden.de>
* [multistream-select] Fix panic with V1Lazy and add integration tests.
Fixes a panic when using the `V1Lazy` negotiation protocol,
a regression introduced in https://github.com/libp2p/rust-libp2p/pull/1484.
Thereby adds integration tests for a transport upgrade with both
`V1` and `V1Lazy` to the `multistream-select` crate to prevent
future regressions.
* Cleanup.
* Update changelog.
Also add warn if parsing of a packet fails, so problems with for example packet
sizes can more easily be detected.
Reasoning:
The previous 2048 bytes is already larger than the recommend size by
[rfc6762](https://tools.ietf.org/html/rfc6762#page-46), which recommends
a packet size that fits within the interface MTU.
Nevertheless the rfc also states, that if more data needs to be
transmitted one should rely on IP fragments, which would only pose
problems when interfacing with devices not understanding IP fragments.
The standard also imposes a strict upper limit of 9000 bytes.
Therefore raising `recv_buffer` to 4096 seems sensible, given that we
already exceed the recommend size and given that we are not restricting
the size when sending in any way. Meaning the implementation already
sends packets larger than recommended, just can't handle them on
reception.
* Update cuckoofilter requirement from 0.3.2 to 0.5.0
Updates the requirements on [cuckoofilter](https://github.com/axiomhq/rust-cuckoofilter) to permit the latest version.
- [Release notes](https://github.com/axiomhq/rust-cuckoofilter/releases)
- [Changelog](https://github.com/axiomhq/rust-cuckoofilter/blob/master/CHANGELOG.md)
- [Commits](https://github.com/axiomhq/rust-cuckoofilter/commits)
Signed-off-by: dependabot[bot] <support@github.com>
* protocols/floodsub: Warn when Cuckoofilter has to evict item
With Cuckoofilter `v0.4.0` `add` and `test_and_add` return an error when
an old element has to be evicted in favor of a new one to take its
place. The previous behavior was panicing.
With this commit the error is logged on `warn` level.
* *: Update changelogs and cargo tomls
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Max Inden <mail@max-inden.de>
* protocols/plaintext: Do not UVI encode goodput
Only prefix handshake messages with the message length in bytes as an
unsigned varint. Return a plain socket once handshaking succeeded.
* *: Bump minor version in changelogs and cargo tomls
* Restore `RequestResponse::throttled`.
In contrast to the existing "throttled" approach this PR adds back-
pressure to the protocol without requiring pre-existing knowledge
of all nodes about their limits. It adds small, CBOR-encoded headers
to the actual payload data. Extra credit messages communicate back
to the sender how many more requests it is allowed to send.
* Remove some noise.
* Resend credit grant after connection closed.
Should an error in some lower layer cause a connection to be closed,
our previously sent credit grant may not have reached the remote peer.
Therefore, pessimistically, a credit grant is resent whenever a
connection is closed. The remote ignores duplicate grants.
* Remove inbound/outbound tracking per peer.
* Send ACK as response to duplicate credit grants.
* Simplify.
* Fix grammar.
* Incorporate review feedback.
- Remove `ResponseSent` which was a leftover from previous attemps
and issue a credit grant immediately in `send_response`.
- Only resend credit grants after a connection is closed if we are
still connected to this peer.
* Move codec/header.rs to throttled/codec.rs.
* More review suggestions.
* Generalise `ProtocolWrapper` and use shorter prefix.
* Update protocols/request-response/src/lib.rs
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
* Update protocols/request-response/src/throttled.rs
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
* Update protocols/request-response/src/throttled.rs
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
* Minor comment changes.
* Limit max. header size to 8KiB
* Always construct initial limit with 1.
Since honest senders always assume a send budget of 1 and wait for
credit afterwards, setting the default limit to a higher value
can only become effective after informing the peer about it which
means leaving `max_recv` at 1 and setting `next_max` to the desired
value.
* Use LRU cache to keep previous peer infos.
Peers may send all their requests, reconnect and send again all their
requests, starting from a fresh budget. The LRU cache keeps the peer
information around and reuses it when the peer reconnects, continuing
with the previous remaining limit.
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
* Restore `RequestResponse::throttled`.
In contrast to the existing "throttled" approach this PR adds back-
pressure to the protocol without requiring pre-existing knowledge
of all nodes about their limits. It adds small, CBOR-encoded headers
to the actual payload data. Extra credit messages communicate back
to the sender how many more requests it is allowed to send.
* Remove some noise.
* Resend credit grant after connection closed.
Should an error in some lower layer cause a connection to be closed,
our previously sent credit grant may not have reached the remote peer.
Therefore, pessimistically, a credit grant is resent whenever a
connection is closed. The remote ignores duplicate grants.
* Remove inbound/outbound tracking per peer.
* Send ACK as response to duplicate credit grants.
* Simplify.
* Fix grammar.
* Incorporate review feedback.
- Remove `ResponseSent` which was a leftover from previous attemps
and issue a credit grant immediately in `send_response`.
- Only resend credit grants after a connection is closed if we are
still connected to this peer.
* Move codec/header.rs to throttled/codec.rs.
* More review suggestions.
* Generalise `ProtocolWrapper` and use shorter prefix.
* Update protocols/request-response/src/lib.rs
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
* Update protocols/request-response/src/throttled.rs
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
* Update protocols/request-response/src/throttled.rs
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
* Minor comment changes.
* Limit max. header size to 8KiB
* Always construct initial limit with 1.
Since honest senders always assume a send budget of 1 and wait for
credit afterwards, setting the default limit to a higher value
can only become effective after informing the peer about it which
means leaving `max_recv` at 1 and setting `next_max` to the desired
value.
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
In order to make use of the distances returned by `KBucketRef::range` in
a human readable format, one needs to be able to translate the 256 bit in
a `Distance` to a smaller space.
Compiling libp2p-kad for `--target wasm32-unknown-unknown` fails with
the cryptic error message `cannot infer type for type `usize``.
Explicitly converting to `usize` solves the issue.
Co-authored-by: Andronik Ordian <write@reusable.software>
