* Implement `/dnsaddr` support on `libp2p-dns`.
To that end, since resolving `/dnsaddr` addresses needs
"fully qualified" multiaddresses when dialing, i.e. those
that end with the `/p2p/...` protocol, we make sure that
dialing always uses such fully qualified addresses by
appending the `/p2p` protocol as necessary. As a side-effect,
this adds support for dialing peers via "fully qualified"
addresses, as an alternative to using a `PeerId` together
with a `Multiaddr` with or without the `/p2p` protocol.
* Adapt libp2p-relay.
* Update versions, changelogs and small cleanups.
* Add `Kademlia::put_record_to` for storing a record at specific nodes,
e.g. for write-back caching after a successful read. In that context,
peers that were queried in a successful `Kademlia::get_record` operation but
did not return a record are now returned in the `GetRecordOk::no_record`
list of peer IDs.
Closes https://github.com/libp2p/rust-libp2p/issues/1577.
* Update protocols/kad/src/behaviour.rs
Co-authored-by: Max Inden <mail@max-inden.de>
* Refine implementation.
Rather than returning the peers that are cache candidates
in a `Vec` in an arbitrary order, use a `BTreeMap`. Furthermore,
make the caching configurable, being enabled by default with
`max_peers` of 1. By configuring it with `max_peers` > 1 it is
now also possible to control at how many nodes the record is cached
automatically after a lookup with quorum 1. When enabled,
successful lookups will always return `cache_candidates`, which
can be used explicitly with `Kademlia::put_record_to` after
lookups with a quorum > 1.
* Re-export KademliaCaching
* Update protocols/kad/CHANGELOG.md
Co-authored-by: Max Inden <mail@max-inden.de>
* Clarify changelog.
Co-authored-by: Max Inden <mail@max-inden.de>
* Remove substream-specific protocol negotiation version.
Remove the option for a substream-specific multistream select protocol override.
The override at this granularity is no longer deemed useful, in particular because
it can usually not be configured for existing protocols like `libp2p-kad` and others.
There is a `Swarm`-scoped configuration for this version available since
[1858](https://github.com/libp2p/rust-libp2p/pull/1858).
* Update protocol crate versions and changelogs.
* Clean up documentation.
* Make clippy "happy".
Address all clippy complaints that are not purely stylistic (or even
have corner cases with false positives). Ignore all "style" and "pedantic" lints.
* Fix tests.
* Undo unnecessary API change.
Move transport upgrade protocols from `protocols/`
to `transports/`, such that only "application protocols"
that depend on `libp2p-swarm` remain in `protocols/`,
whereas there is no such dependency in `transports/`
outside of integration tests.
Tweak README and top-level CHANGELOG.
`futures-codec` has not been updated in the recent months. It still
depends on `bytes` `v0.5` preventing all downstream dependencies to
upgrade to `bytes` `v1.0`.
This commit replaces `futures_codec` in favor of `asynchronous-codec`
The latter is a fully upgraded fork of the former.
In addition this commit upgrades:
- bytes to v1
- unsigned-varint to v0.6.0
- prost to v0.7
- From<record::Key>
- From<Vec<u8>
This will enable to use additional types in kad.get_closest_peers as it was
possible in pre 0.33 version.
Co-authored-by: Max Inden <mail@max-inden.de>
Remove `NotifyHandler::All` thus removing the requirement for events
send from a `NetworkBehaviour` to a `ProtocolsHandler` to be `Clone`. An
implementor of `NetworkBehaviour` can still notify all
`ProtocolHandler`s for a given peer by emitting one `NotifyHandler`
event per connection to that peer.
* Make the lazy variant interoperable.
The remaining optimisation for `V1Lazy` for a listener
in the negotiation, whereby the listener delays flushing
of the multistream version header, is hereby removed.
The remaining effect of `V1Lazy` is only on the side of
the dialer, which delays flushing of its singular
protocol proposal in order to send it together with
the first application data (or an attempt is made to
read from the negotiated stream, which similarly
triggers a flush of the protocol proposal). This
permits `V1Lazy` dialers to be interoperable with
`V1` listeners. The remaining theoretical pitfall whereby
application data gets misinterpreted as another protocol
proposal by a listener remains, however unlikely.
`V1` remains the default, but we may eventually risk
just making this lazy dialer flush a part of the default
`V1` implementation, removing the dedicated `V1Lazy`
version identifier.
* Update CHANGELOG
* Separate versions from mere header lines.
Every multistream-select version maps to a specific header line,
but there may be different variants of the same multistream-select
version using the same header line, i.e. the same wire protocol.
* Cleanup
* Update misc/multistream-select/CHANGELOG.md
* Add "infinite" scores for external addresses.
Extend address scores with an infinite cardinal, permitting
addresses to be retained "forever" or until explicitly removed.
Expose (external) address scores on the API.
* Update swarm/src/registry.rs
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* Fix compilation.
* Update CHANGELOG
Co-authored-by: Pierre Krieger <pierre.krieger1708@gmail.com>
* feat: upgrade to multihash 0.13
`multihash` changes a lot internally, it is using stack allocation instead
of heap allocation. This leads to a few limitations in regards on how
`Multihash` can be used.
Therefore `PeerId` is now using a `Bytes` internally so that only minimal
changes are needed.
* Update versions and changelogs.
Co-authored-by: Roman Borschel <romanb@users.noreply.github.com>
Co-authored-by: Roman S. Borschel <roman@parity.io>
* Streamline mplex and yamux configurations.
* For all configuration options that exist for both multiplexers
and have the same semantics, use the same names for the
configuration.
* Rename `Config` to `YamuxConfig` for consistentcy with
the majority of other protocols, e.g. `MplexConfig`, `PingConfig`,
`KademliaConfig`, etc.
* Completely hide `yamux` APIs within `libp2p-yamux`. This allows
to fully control the libp2p API and streamline it with other
muxer APIs, consciously choosing e.g. which configuration options
to make configurable in libp2p and which to fix to certain values.
It does also not necessarily prescribe new incompatible version bumps of
yamux for `libp2p-yamux`, as no `yamux` types are exposed. The cost
is some more duplication of configuration options in the API, as well
as the need to update `libp2p-yamux` if `yamux` introduces new
configuration options that `libp2p-yamux` wants to expose as well.
* Update CHANGELOGs.
* Delay routing table update on new connections.
In order to avoid adding peers to the local routing table
which use a different protocol name and thus a different
overlay network, only update the local routing table
for newly established connections once the associated
connection handler reports that the protocol has been
confirmed.
* Update CHANGELOG.
In all cases, we pass the PeerId directly as the connection info.
The flexbility of doing something different here was originally
envisioned but turned out to be never needed.
For reference see: https://github.com/libp2p/rust-libp2p/issues/1798#issuecomment-714526056
Co-authored-by: Max Inden <mail@max-inden.de>
* [multistream-select] Fix panic with V1Lazy and add integration tests.
Fixes a panic when using the `V1Lazy` negotiation protocol,
a regression introduced in https://github.com/libp2p/rust-libp2p/pull/1484.
Thereby adds integration tests for a transport upgrade with both
`V1` and `V1Lazy` to the `multistream-select` crate to prevent
future regressions.
* Cleanup.
* Update changelog.
In order to make use of the distances returned by `KBucketRef::range` in
a human readable format, one needs to be able to translate the 256 bit in
a `Distance` to a smaller space.
Compiling libp2p-kad for `--target wasm32-unknown-unknown` fails with
the cryptic error message `cannot infer type for type `usize``.
Explicitly converting to `usize` solves the issue.
Co-authored-by: Andronik Ordian <write@reusable.software>
* Store addresses of provider records.
So far, provider records are stored without their
addresses and the addresses of provider records are
obtained from the routing table on demand. This has
two shortcomings:
1. We can only return provider records whose provider
peers happen to currently be in the local routing table.
2. The local node never returns itself as a provider for
a key, even if it is indeed a provider.
These issues are addressed here by storing the addresses
together with the provider records, falling back to
addresses from the routing table only for backward-compatibility
with existing implementations of `RecordStore` using persistent
storage.
Resolves https://github.com/libp2p/rust-libp2p/issues/1526.
* Update protocols/kad/src/behaviour.rs
Co-authored-by: Max Inden <mail@max-inden.de>
* Remove negligible use of with_capacity.
* Update changelog.
Co-authored-by: Max Inden <mail@max-inden.de>
With 826f513 a `StreamMuxer` can notify that the address of a remote
peer changed. This is needed to support the transport protocol QUIC as
remotes can change their IP addresses within the lifetime of a single
connection.
This commit implements the `NetworkBehaviour::inject_address_change`
handler to update the Kademlia routing table accordingly.
* Emit events for active connection close and fix `disconnect()`.
The `Network` does currently not emit events for actively
closed connections, e.g. via `EstablishedConnection::close`
or `ConnectedPeer::disconnect()`. As a result, when actively
closing connections, there will be `ConnectionEstablished`
events emitted without eventually a matching `ConnectionClosed`
event. This seems undesirable and has the consequence that
the `Swarm::ban_peer_id` feature in `libp2p-swarm` does not
result in appropriate calls to `NetworkBehaviour::inject_connection_closed`
and `NetworkBehaviour::inject_disconnected`. Furthermore,
the `disconnect()` functionality in `libp2p-core` is currently
broken as it leaves the `Pool` in an inconsistent state.
This commit does the following:
1. When connection background tasks are dropped
(i.e. removed from the `Manager`), they
always terminate immediately, without attempting
an orderly close of the connection.
2. An orderly close is sent to the background task
of a connection as a regular command. The
background task emits a `Closed` event
before terminating.
3. `Pool::disconnect()` removes all connection
tasks for the affected peer from the `Manager`,
i.e. without an orderly close, thereby also
fixing the discovered state inconsistency
due to not removing the corresponding entries
in the `Pool` itself after removing them from
the `Manager`.
4. A new test is added to `libp2p-swarm` that
exercises the ban/unban functionality and
places assertions on the number and order
of calls to the `NetworkBehaviour`. In that
context some new testing utilities have
been added to `libp2p-swarm`.
This addresses https://github.com/libp2p/rust-libp2p/issues/1584.
* Update swarm/src/lib.rs
Co-authored-by: Toralf Wittner <tw@dtex.org>
* Incorporate some review feedback.
* Adapt to changes in master.
* More verbose panic messages.
* Simplify
There is no need for a `StartClose` future.
* Fix doc links.
* Further small cleanup.
* Update CHANGELOGs and versions.
Co-authored-by: Toralf Wittner <tw@dtex.org>
