In preparation for removing this variant, we are issuing a deprecation notice. The linked issue describes why and guides users in migrating away from it. This deprecation is backwards-compatible and allows us to remove the variant in the next breaking release. We haven't migrated all internal protocols yet but that isn't strictly necessary to issue the deprecation.
Related: #3844.
Pull-Request: #4656.
Starting with nightly-2023-09-10, the `[lints]` section in `Cargo.toml` files is stable. Together with workspace inheritance, this can be used to declare all lints we want to enforce in a single place.
Resolves: #4484.
Pull-Request: #4575.
Using workspace inheritance breaks `cargo release` because it cannot resolve that the dev-dependencies should only use a `path` and not a version.
Pull-Request: #4097.
Co-Authored-By: Thomas Eizinger <thomas@eizinger.io>
Remove the use of the core `upgrade::transfer` module in `ping` example (`request-response` protocol) in favor of `cbor` codec.
Related #4011.
Pull-Request: #4046.
This modification removes deprecated dependency `wasm_timer` and enables wasm compatibility on the gossibsup protocol by simply substituting the `wasm_timer::Instant` with `instant::Instant`(which supports `fn checked_add`) and `wasm_timer::Interval` with `futures_ticker::Ticker`.
Pull-Request: #3973.
This patch adds two modules to `libp2p::request_response`:
- `cbor`
- `json`
Both define a `Behaviour` type-alias that comes with a `Codec` implementation which uses the respective `serde` crate to serialize and deserialize the messages.
Fixes#3905.
Pull-Request: #3952.
Previously, a `NetworkBehaviour` could report an `AddressScore` for an external address. This score was a `u32` and addresses would be ranked amongst those.
In reality, an address is either confirmed to be publicly reachable (via a protocol such as AutoNAT) or merely represents a candidate that might be an external address. In a way, addresses are guilty (private) until proven innocent (publicly reachable).
When a `NetworkBehaviour` reports an address candidate, we perform address translation on it to potentially correct for ephemeral ports of TCP. These candidates are then injected back into the `NetworkBehaviour`. Protocols such as AutoNAT can use these addresses as a source for probing their NAT status. Once confirmed, they can emit a `ToSwarm::ExternalAddrConfirmed` event which again will be passed to all `NetworkBehaviour`s.
This simplified approach will allow us implement Kademlia's client-mode (https://github.com/libp2p/rust-libp2p/issues/2032) without additional configuration options: As soon as an address is reported as publicly reachable, we can activate server-mode for that connection.
Related: https://github.com/libp2p/rust-libp2p/pull/3877.
Related: https://github.com/libp2p/rust-libp2p/issues/3953.
Related: https://github.com/libp2p/rust-libp2p/issues/2032.
Related: https://github.com/libp2p/go-libp2p/issues/2229.
Co-authored-by: Max Inden <mail@max-inden.de>
Pull-Request: #3954.
Previously, the associated types on `NetworkBehaviour` and `ConnectionHandler` carried generic names like `InEvent` and `OutEvent`. These names are _correct_ in that `OutEvent`s are passed out and `InEvent`s are passed in but they don't help users understand how these types are used.
In theory, a `ConnectionHandler` could be used separately from `NetworkBehaviour`s but that is highly unlikely. Thus, we rename these associated types to indicate, where the message is going to be sent to:
- `NetworkBehaviour::OutEvent` is renamed to `ToSwarm`: It describes the message(s) a `NetworkBehaviour` can emit to the `Swarm`. The user is going to receive those in `SwarmEvent::Behaviour`.
- `ConnectionHandler::InEvent` is renamed to `FromBehaviour`: It describes the message(s) a `ConnectionHandler` can receive from its behaviour via `ConnectionHandler::on_swarm_event`. The `NetworkBehaviour` can send it via the `ToSwarm::NotifyHandler` command.
- `ConnectionHandler::OutEvent` is renamed to `ToBehaviour`: It describes the message(s) a `ConnectionHandler` can send back to the behaviour via the now also renamed `ConnectionHandlerEvent::NotifyBehaviour` (previously `ConnectionHandlerEvent::Custom`)
Resolves: #2854.
Pull-Request: #3848.
This patch tackles two things at once that are fairly intertwined:
1. There is no such thing as a "substream" in libp2p, the spec and other implementations only talk about "streams". We fix this by deprecating `NegotiatedSubstream`.
2. Previously, `NegotiatedSubstream` was a type alias that pointed to a type from `multistream-select`, effectively leaking the version of `multistream-select` to all dependencies of `libp2p-swarm`. We fix this by introducing a `Stream` newtype.
Resolves: #3759.
Related: #3748.
Pull-Request: #3912.
With this patch, implementations of `ConnectionHandler` (which are typically composed in a tree) can exchange information about the supported protocols of a remote with each other via `ConnectionHandlerEvent::ReportRemoteProtocols`. The provided `ProtocolSupport` enum can describe either additions or removals of the remote peer's protocols.
This information is aggregated in the connection and passed down to the `ConnectionHandler` via `ConnectionEvent::RemoteProtocolsChange`.
Similarly, if the listen protocols of a connection change, all `ConnectionHandler`s on the connection will be notified via `ConnectionEvent::LocalProtocolsChange`. This will allow us to eventually remove `PollParameters` from `NetworkBehaviour`.
This pattern allows protocols on a connection to communicate with each other. For example, protocols like identify can share the list of (supposedly) supported protocols by the remote with all other handlers. A protocol like kademlia can accurately add and remove a remote from its routing table as a result.
Resolves: #2680.
Related: #3124.
Pull-Request: #3651.
The currently provided `ConnectionHandlerUpgrErr` is very hard to use. Not only does it have a long name, it also features 3 levels of nesting which results in a lot of boilerplate. Last but not least, it exposes `multistream-select` as a dependency to all protocols.
We fix all of the above by renaming the type to `StreamUpgradeError` and flattening out its interface. Unrecoverable errors during protocol selection are hidden within the `Io` variant.
Related: #3759.
Pull-Request: #3882.
This removes the deprecated `IntoConnectionHandler` trait and all its implementations. Consequently, `NetworkBehaviour::new_handler` and `NetworkBehaviour::addresses_of_peer` are now gone and the two `handle_` functions are now required to implement.
Related: #3647.
Pull-Request: #3884.
When an inbound stream upgrade fails, there isn't a whole lot we can do about that in the handler. In fact, for several errors, we wouldn't even know which specific handler to target, for example, `NegotiationFailed`. Similiarly, in case of an IO error during the upgrade, we don't know which handler the stream was eventually meant to be for.
Pull-Request: #3605.
Previously, a protocol could be any sequence of bytes as long as it started with `/`. Now, we directly parse a protocol as `String` which enforces it to be valid UTF8.
To notify users of this change, we delete the `ProtocolName` trait. The new requirement is that users need to provide a type that implements `AsRef<str>`.
We also add a `StreamProtocol` newtype in `libp2p-swarm` which provides an easy way for users to ensure their protocol strings are compliant. The newtype enforces that protocol strings start with `/`. `StreamProtocol` also implements `AsRef<str>`, meaning users can directly use it in their upgrades.
`multistream-select` by itself only changes marginally with this patch. The only thing we enforce in the type-system is that protocols must implement `AsRef<str>`.
Resolves: #2831.
Pull-Request: #3746.
Previously, we would specify the version and path of our workspace dependencies in each of our crates. This is error prone as https://github.com/libp2p/rust-libp2p/pull/3658#discussion_r1153278072 for example shows. Problems like these happened in the past too.
There is no need for us to ever depend on a earlier version than the most current one in our crates. It thus makes sense that we manage this version in a single place.
Cargo supports a feature called "workspace inheritance" which allows us to share a dependency declaration across a workspace and inherit it with `{ workspace = true }`.
We do this for all our workspace dependencies and for the MSRV.
Resolves#3787.
Pull-Request: #3715.
With https://github.com/libp2p/rust-libp2p/pull/3658, these crates depend on the `0.42.1` release to access the new `ToSwarm` type. With the currently specified version, a user could theoretically run into a compile error if they pin `libp2p-swarm` to `0.42.0` in their lockfile but update to the latest patch release of one of these crates.
Pull-Request: #3711.
This patch-set introduces `libp2p-swarm-test`. It provides utilities for quick and safe bootstrapping of tests for `NetworkBehaviour`s. The main design features are:
- Everything has timeouts
- APIs don't get in your way
- Minimal boilerplate
Closes#2884.
Pull-Request: #2888.
A large release with lots of changes I am looking forward to. Sorry for the long release cadence.
Anything folks would like to see included that is not yet in `master`? As usual I would like to only block on bug fixes.
Pull-Request: #3491.
Previously, a `ConnectionHandler` was immediately requested from the `NetworkBehaviour` as soon as a new dial was initiated or a new incoming connection accepted.
With this patch, we delay the creation of the handler until the connection is actually established and fully upgraded, i.e authenticated and multiplexed.
As a consequence, `NetworkBehaviour::new_handler` is now deprecated in favor of a new set of callbacks:
- `NetworkBehaviour::handle_pending_inbound_connection`
- `NetworkBehaviour::handle_pending_outbound_connection`
- `NetworkBehaviour::handle_established_inbound_connection`
- `NetworkBehaviour::handle_established_outbound_connection`
All callbacks are fallible, allowing the `NetworkBehaviour` to abort the connection either immediately or after it is fully established. All callbacks also receive a `ConnectionId` parameter which uniquely identifies the connection. For example, in case a `NetworkBehaviour` issues a dial via `NetworkBehaviourAction::Dial`, it can unambiguously detect this dial in these lifecycle callbacks via the `ConnectionId`.
Finally, `NetworkBehaviour::handle_pending_outbound_connection` also replaces `NetworkBehaviour::addresses_of_peer` by allowing the behaviour to return more addresses to be used for the dial.
Resolves#2824.
Pull-Request: #3254.
We create the `ConnectionId` for the new connection as part of `DialOpts`. This allows `NetworkBehaviour`s to accurately track state regarding their own dial attempts.
This patch is the main enabler of https://github.com/libp2p/rust-libp2p/pull/3254. Removing the `handler` field will allow us to deprecate the `NetworkBehaviour::new_handler` function in favor of four new ones that give more control over the connection lifecycle.
Previously, we used the full reference to the `OutEvent` of the `ConnectionHandler` in all implementations of `NetworkBehaviour`. Not only is this very verbose, it is also more brittle to changes. With the current implementation plan for #2824, we will be removing the `IntoConnectionHandler` abstraction. Using a type-alias to refer to the `OutEvent` makes the migration much easier.
