UNSUBSCRIBE and PUNSUBSCRIBE commands are designed to mass-unsubscribe
the client respectively all the channels and patters if called without
arguments.
However when these functions are called without arguments, but there are
no channels or patters we are subscribed to, the old behavior was to
don't reply at all.
This behavior is broken, as every command should always reply.
Also it is possible that we are no longer subscribed to a channels but we
are subscribed to patters or the other way around, and the client should
be notified with the correct number of subscriptions.
Also it is not pretty that sometimes we did not receive a reply at all
in a redis-cli session from these commands, blocking redis-cli trying
to read the reply.
This fixes issue #714.
The Redis Slow Log always used to log the slow commands executed inside
a MULTI/EXEC block. However also EXEC was logged at the end, which is
perfectly useless.
Now EXEC is no longer logged and a test was added to test this behavior.
This fixes issue #759.
SDIFF used an algorithm that was O(N) where N is the total number
of elements of all the sets involved in the operation.
The algorithm worked like that:
ALGORITHM 1:
1) For the first set, add all the members to an auxiliary set.
2) For all the other sets, remove all the members of the set from the
auxiliary set.
So it is an O(N) algorithm where N is the total number of elements in
all the sets involved in the diff operation.
Cristobal Viedma suggested to modify the algorithm to the following:
ALGORITHM 2:
1) Iterate all the elements of the first set.
2) For every element, check if the element also exists in all the other
remaining sets.
3) Add the element to the auxiliary set only if it does not exist in any
of the other sets.
The complexity of this algorithm on the worst case is O(N*M) where N is
the size of the first set and M the total number of sets involved in the
operation.
However when there are elements in common, with this algorithm we stop
the computation for a given element as long as we find a duplicated
element into another set.
I (antirez) added an additional step to algorithm 2 to make it faster,
that is to sort the set to subtract from the biggest to the
smallest, so that it is more likely to find a duplicate in a larger sets
that are checked before the smaller ones.
WHAT IS BETTER?
None of course, for instance if the first set is much larger than the
other sets the second algorithm does a lot more work compared to the
first algorithm.
Similarly if the first set is much smaller than the other sets, the
original algorithm will less work.
So this commit makes Redis able to guess the number of operations
required by each algorithm, and select the best at runtime according
to the input received.
However, since the second algorithm has better constant times and can do
less work if there are duplicated elements, an advantage is given to the
second algorithm.
EVALSHA used to crash if the SHA1 was not lowercase (Issue #783).
Fixed using a case insensitive dictionary type for the sha -> script
map used for replication of scripts.
The previous behavior was to return -1 if:
1) Existing key but without an expire set.
2) Non existing key.
Now the second case is handled in a different, and TTL will return -2
if the key does not exist at all.
PTTL follows the same behavior as well.
So instead to reply with a generic error like:
-ERR ... wrong kind of value ...
now it replies with:
-WRONGTYPE ... wrong kind of value ...
This makes this particular error easy to check without resorting to
(fragile) pattern matching of the error string (however the error string
used to be consistent already).
Client libraries should return a specific exeption type for this error.
Most of the commit is about fixing unit tests.
When calling SCRIPT KILL currently you can get two errors:
* No script in timeout (busy) state.
* The script already performed a write.
It is useful to be able to distinguish the two errors, but right now both
start with "ERR" prefix, so string matching (that is fragile) must be used.
This commit introduces two different prefixes.
-NOTBUSY and -UNKILLABLE respectively to reply with an error when no
script is busy at the moment, and when the script already executed a
write operation and can not be killed.
When SORT is called with the option BY set to a string constant not
inclduing the wildcard character "*", there is no way to sort the output
so any ordering is valid. This allows the SORT internals to optimize its
work and don't really sort the output at all.
However it was odd that this option was not able to retain the natural
order of a sorted set. This feature was requested by users multiple
times as sometimes to call SORT with GET against sorted sets as a way to
mass-fetch objects can be handy.
This commit introduces two things:
1) The ability of SORT to return sorted sets elements in their natural
ordering when `BY nosort` is specified, accordingly to `DESC / ASC` options.
2) The ability of SORT to optimize this case further if LIMIT is passed
as well, avoiding to really fetch the whole sorted set, but directly
obtaining the specified range.
Because in this case the sorting is always deterministic, no
post-sorting activity is performed when SORT is called from a Lua
script.
This commit fixes issue #98.
Lua arrays can't contain nil elements (see
http://www.lua.org/pil/19.1.html for more information), so Lua scripts
were not able to return a multi-bulk reply containing nil bulk
elements inside.
This commit introduces a special conversion: a table with just
a "nilbulk" field set to a boolean value is converted by Redis as a nil
bulk reply, but at the same time for Lua this type is not a "nil" so can
be used inside Lua arrays.
This type is also assigned to redis.NIL, so the following two forms
are equivalent and will be able to return a nil bulk reply as second
element of a three elements array:
EVAL "return {1,redis.NIL,3}" 0
EVAL "return {1,{nilbulk=true},3}" 0
The result in redis-cli will be:
1) (integer) 1
2) (nil)
3) (integer) 3
Redis provides support for blocking operations such as BLPOP or BRPOP.
This operations are identical to normal LPOP and RPOP operations as long
as there are elements in the target list, but if the list is empty they
block waiting for new data to arrive to the list.
All the clients blocked waiting for th same list are served in a FIFO
way, so the first that blocked is the first to be served when there is
more data pushed by another client into the list.
The previous implementation of blocking operations was conceived to
serve clients in the context of push operations. For for instance:
1) There is a client "A" blocked on list "foo".
2) The client "B" performs `LPUSH foo somevalue`.
3) The client "A" is served in the context of the "B" LPUSH,
synchronously.
Processing things in a synchronous way was useful as if "A" pushes a
value that is served by "B", from the point of view of the database is a
NOP (no operation) thing, that is, nothing is replicated, nothing is
written in the AOF file, and so forth.
However later we implemented two things:
1) Variadic LPUSH that could add multiple values to a list in the
context of a single call.
2) BRPOPLPUSH that was a version of BRPOP that also provided a "PUSH"
side effect when receiving data.
This forced us to make the synchronous implementation more complex. If
client "B" is waiting for data, and "A" pushes three elemnents in a
single call, we needed to propagate an LPUSH with a missing argument
in the AOF and replication link. We also needed to make sure to
replicate the LPUSH side of BRPOPLPUSH, but only if in turn did not
happened to serve another blocking client into another list ;)
This were complex but with a few of mutually recursive functions
everything worked as expected... until one day we introduced scripting
in Redis.
Scripting + synchronous blocking operations = Issue #614.
Basically you can't "rewrite" a script to have just a partial effect on
the replicas and AOF file if the script happened to serve a few blocked
clients.
The solution to all this problems, implemented by this commit, is to
change the way we serve blocked clients. Instead of serving the blocked
clients synchronously, in the context of the command performing the PUSH
operation, it is now an asynchronous and iterative process:
1) If a key that has clients blocked waiting for data is the subject of
a list push operation, We simply mark keys as "ready" and put it into a
queue.
2) Every command pushing stuff on lists, as a variadic LPUSH, a script,
or whatever it is, is replicated verbatim without any rewriting.
3) Every time a Redis command, a MULTI/EXEC block, or a script,
completed its execution, we run the list of keys ready to serve blocked
clients (as more data arrived), and process this list serving the
blocked clients.
4) As a result of "3" maybe more keys are ready again for other clients
(as a result of BRPOPLPUSH we may have push operations), so we iterate
back to step "3" if it's needed.
The new code has a much simpler semantics, and a simpler to understand
implementation, with the disadvantage of not being able to "optmize out"
a PUSH+BPOP as a No OP.
This commit will be tested with care before the final merge, more tests
will be added likely.
Bug #582 was not present in 32 bit builds of Redis as
getObjectFromLong() will return an error for overflow.
This commit makes sure that the test does not fail because of the error
returned when running against 32 bit builds.
